Intermec Janus 2020 Reference Manual - Im_Backlight_On
im_backlight_on
3-9
3
im_backlight_on
Purpose:
This procedure turns the JANUS display backlight on to help you see the
reader display in dimly lit environments.
Syntax:
With Intrmecd_IO, Intrmecp_IO;
Use Intrmecd_IO, Intrmecp_IO;
procedure im_backlight_on;
Parameters:
None.
Return Value:
None.
Notes:
You can program the backlight to automatically turn off after a specified
time to save battery power. The length of time depends on the backlight
timeout configuration parameter. The configuration parameter is set in
1-second increments. The default is 10 seconds.
This procedure has no effect on the JANUS 2050.
See Also:
im_backlight_off, im_backlight_toggle
Example
With System, Text_IO, Intrmecd_IO, Intrmecp_IO;
Use System, Text_IO, Intrmecd_IO, Intrmecp_IO;
procedure lighton Is
begin
im_backlight_on;
Put_Line ("Backlight on");
end lighton;