Pb42 printer quick start guide.
Intermec technologies corporation corporate headquarters 6001 36th ave. W. Everett, wa 98203 u.S.A. Www.Intermec.Com the information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service intermec-manufactured equipment and is not to be re...
Pb42 printer quick start guide 1 what is the pb42 printer? The pb42 printer is a rugged receipt printer designed for use with the ck60 computer. The pb42 provides: • print resolution of 203 dpi • print speeds up to 8.5 cm (3.3 inches) per second • serial or bluetooth™ communication options installin...
2 pb42 printer quick start guide to install the batteries 1 pull the battery cover latch towards the front of the printer and lift up on the battery cover. 2 insert batteries into the two battery slots until they lock in place. The contact side of the battery faces the media cover. Battery cover bat...
Pb42 printer quick start guide 3 3 close the battery cover. 4 connect the ac power adapter to the dc power connector on the printer. 5 connect one end of the power cord to the ac power adapter and then plug other end into an ac outlet. Loading media you can use roll or fanfold receipt media with the...
4 pb42 printer quick start guide 3 insert the media between the two media supports. Make sure you load the media clockwise so that it pulls off the core from the bottom of the printer. 4 pull out a few inches of the media. Media cover release media cover media supports.
Pb42 printer quick start guide 5 5 close the media cover until it latches. 6 slide the media cover release button to the locked (right) position. Understanding the control panel the pb42 control panel contains two buttons and three lights. Button or led function radio button turns the radio on and o...
6 pb42 printer quick start guide performing a test print after you have loaded the media in the printer, you are ready to print the configuration test information. Use this information for reference when installing your pb42 printer and for verifying proper printer operation. To perform a test print...
Pb42 printer quick start guide 7 specifications physical dimensions depth: 7.87 cm (3.1 inches) height: 18.03 cm (7.1 inches) width: 16.82 cm (6.62 inches) weight: less than 1.23 kg (2.7 lb) with battery packs and receipt paper. Power specifications ac power adapter: 50 watt voltage range: 12v ± 5% ...
6001 36th avenue west everett, wa 98203 u.S.A. Www.Intermec.Com © 2004 intermec technologies corp. All rights reserved pb42 printer quick start guide *074572-001* 074572-001.
