J&M Corporation XXRK-630SP4-14SG-ST4 Installation instructions manual - page 5
Manual is about: STAGE-4 ROKKER XXR
Custom 630w 4-Speaker/
Amplifier Install Kit for
2014-2018 Harley
StreetGlide/Ultra
of
9
4. Position the speaker down into the lid to determine if
the 3” hole needs to be enlarged slightly in any direc-
tion, to completely clear the ROKKER XX speaker
magnet. A Dremel tool with rotating bit can be used
to enlarge this opening.
5. Place the included plastic protective magnet cup
down into the 3” opening and mark the first of three
9/64th” holes to be drilled, thru the flange and
saddlebag lid basket, to secure the plastic cup into
the opening.
6. Insert the 6-32 X ½” Allen head screw, with washer,
up thru the bottom of the basket, thru the cup and
secure using the supplied nut plate.