JabloCom EYE-02 Application Note - 1 I
External document
File name:
EYE-02 Wireless peripherals
2/12
URL:
http://www.jablocom.com/download
1 I
NTRODUCTION
The application note describes possibilities of using camera EYE-02 with wireless peripherals from the OASiS
system manufactured by Jablotron Alarms. OASiS system is based on the principle of control panel communicating
with wireless peripherals. When the peripherals are used with camera EYE-02, the camera plays the role of the
control panel. Camera EYE-02 is equipped with 7 internal detectors and 2 programmable switches. Wireless
peripherals further expand camera capabilities.
1.1 Overview of peripherals
Five types of peripherals can be used with the camera: wireless buttons, detectors, sirens, relays and thermostats.
Picture 1: Examples of peripherals used with EYE-02
Up to 20 wireless peripherals can be used with the camera at the same time. Operating range of peripherals is
100m in free space.
Wireless buttons, detectors and sirens are powered by batteries with typical lifetime of at least 2 years. Exact
battery lifetime depends on the battery type used and it is mentioned in the manual of each peripheral.
Detectors and sirens communicate with the EYE-02 camera, i.e. they report information about device status. The
camera obtains information
when camera does not receive regular reports from the peripheral (communication with peripheral is
interrupted) or camera starts receiving regular reports from the peripheral again (communication with
peripheral is recovered).
when detector battery is low or there is failure in AC power when detector is powered from the mains.
when tampering (unauthorized manipulation) into detectors or sirens happened. Information is sent by the
peripheral even when the camera is in SLEEP mode. If you need to replace the battery in the peripheral,
switch the camera to CONFIG mode to avoid false alarms.