1. DL manuals
  2. Jablotron
  3. Security System
  4. JA-63 „PROFI“
  5. User Manual

Jablotron JA-63 „PROFI“ User Manual

Other manuals for JA-63 „PROFI“: Installation Manual, User Manual, Installation Manual, User Manual

Summary of JA-63 „PROFI“

  • Page 1

    Ja-63 „profi“ user manual.

  • Page 2

    Alarm system ja-63 „profi“ - 2 - mgk51504 contents: 1 limited warranty ........................................................................................................................... 2 2 indicators..............................................................................................

  • Page 3

    Alarm system ja-63 „profi“ - 3 - mgk51504 note: features of this system can be substantially modified by programming during installation. The installer should instruct the users how to operate and test the system. 2 indicators the alarm system’s status is indicated on the keypad. There can be multip...

  • Page 4

    Alarm system ja-63 „profi“ - 4 - mgk51504 telephone line indicated event (tamper or failure) was caused by the telephone line digital bus indicated event (tamper or failure) was caused by a device (keypad or pc) connected to the digital bus communication failure wireless keypad lost connection with ...

  • Page 5

    Alarm system ja-63 „profi“ - 5 - mgk51504 master code is an extra (15 th ) access code for the supervisor. It can operate the system and it also allows for the programming of the other user codes and to enter the user mode (see section 4). Factory default master code is 1234. The supervisor should c...

  • Page 6

    Alarm system ja-63 „profi“ - 6 - mgk51504 3.2 disarming on the keypad -enter your user code on the remote control (rc-4x) – press the button  system will beep twice  if there are 3 beeps, important information is indicated and will be displayed on the keypad. Examples: o failure led is flashing – ...

  • Page 7

    Alarm system ja-63 „profi“ - 7 - mgk51504 3.5 home arming the installer can program particular detectors so that they will be automatically bypassed in the so called “home” partial arming. This allows for people to stay in the particular part of the house after arming. To arm partially:  on the key...

  • Page 8

    Alarm system ja-63 „profi“ - 8 - mgk51504 3.9 subsystem arming in a large building a sub control panel can be enrolled to the ja-63. The subsystem reports all alarms and failures to the main system. The installer can program if the systems will be armed and disarmed separately (by their own codes an...

  • Page 9

    Alarm system ja-63 „profi“ - 9 - mgk51504 4.2 user codes setting there can be up to 14 different user codes for individual users. The system stores to its memory which code was used for what event and when. This data can go to a central monitoring station as well and can also be viewed by a pc with ...

  • Page 10

    Alarm system ja-63 „profi“ - 10 - mgk51504 actions' table a no splitting split 0 no action no action 1 arm all arm all 2 disarm disarm all 3 partial arming arm a 4 partial arming arm b 5 disarm disarm a 6 disarm disarm b 4.4 automatic arming / disarming the system can automatically arm and disarm fo...

  • Page 11

    Alarm system ja-63 „profi“ - 11 - mgk51504 c. Multiple pressing and holding of the keys (2 or 3) will switch the bypass on – off – on – off … 4. By repeating step 3. You can bypass all required alarm sources.  to close the bypass menu press the n key. If anything is bypassed when arming, four beeps...

  • Page 12

    Alarm system ja-63 „profi“ - 12 - mgk51504 example: to store tel. Number 0 123456 to memory no. 2 enter: 7 0 f0 12345 f2 to delete a telephone number enter: 7 f0 fy where y is a memory number from 1 to 4 to exit user mode, press the n key. 5.2.2 telephone communicator testing testing is possible in ...

  • Page 13

    Alarm system ja-63 „profi“ - 13 - mgk51504  open the cover of the detector (keypad)  replace its batteries with new ones (use only corresponding size and good quality alkaline batteries). Wait for approximately 20 seconds before inserting batteries  close the device’s cover and test its function....

  • Page 14

    Alarm system ja-63 „profi“ - 14 - mgk51504 user codes and controllers code index user name section notes a b 0. Master code - supervisor 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. C1 c2 c3 c4 c5 c6 c7 c8 telephone communicator setting memory calling to tel. Number notes 1. 2. 3. 4. 5. Pager time...

  • Page 15

    Alarm system ja-63 „profi“ - 15 - mgk51504 detectors position location in the house detectors type reaction* section a b s wireless detectors 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Wire d inpu ts 1. 2. 3. 4. * i – instant d – delayed f – fire p – panic t – tamper n – next delayed.

  • Page 16

    Alarm system ja-63 „profi“ - 16 - mgk51504 notes:.