- DL manuals
- Jablotron
- Security System
- JA-63 „PROFI“
- User Manual
Jablotron JA-63 „PROFI“ User Manual
Summary of JA-63 „PROFI“
Page 1
Ja-63 “profi“ user manual internet: www.Jablotron.Cz tel.: +420 483 559 999 fax: +420 483 559 993 pod skalkou 33 466 01 jablonec nad nisou czech republic.
Page 2
Contents: 1 indicators .................................................................................................................... 3 2 controlling the system............................................................................................... 4 2.1 arming ............................
Page 3: 1 Indicators
Note: features of this system can be substantially modified by programming during installation. The installer should instruct the users how to operate and test the system. 1 indicators the alarm system’s status is indicated on the keypad. There can be multiple keypads in the system and in such a cas...
Page 4: 2 Controlling The System
Telephone line indicated event (tamper or failure) was caused by the telephone line digital bus indicated event (tamper or failure) was caused by a device (keypad or pc) connected to the digital bus communication failure wireless keypad lost connection with the control panel error self testing error...
Page 5
Master code is an extra (15 th ) access code for the supervisor. It can operate the system and it also allows for the programming of the other user codes and to enter the user mode (see section 3). Factory default master code is 1234. The supervisor should change it after installation. Service code ...
Page 6
2.2 disarming on the keypad -enter your user code b a on the remote control (rc-11) – press the b button • system will beep twice • if there are 3 beeps, important information is indicated and will be displayed on the keypad. Examples: o failure led is flashing – press the n key to view the cause o ...
Page 7
2.5 home arming the installer can program particular detectors so that they will be automatically bypassed in the so called “home” partial arming. This allows for people to stay in the particular part of the house after arming. To arm partially: • on the keypad press home arming button. On the ja-60...
Page 8: 3 User’S Settings
With the master code the supervisor can arm and disarm both sections. If the master code is entered, the system will arm (if completely disarmed) or disarm (if any section is armed). Entering f1 master code will control only section a and f2 master code only section b (this is true only when fast ar...
Page 9
3.2 user codes setting there can be up to 14 different user codes for individual users. The system stores to its memory which code was used for what event and when. This data can go to a central monitoring station as well and can also be viewed by a pc with comlink software. All user codes are empty...
Page 10
Actions' table a no splitting split 0 no action no action 1 arm all arm all 2 disarm disarm all 3 partial arming arm a 4 partial arming arm b 5 disarm disarm a 6 disarm disarm b 3.4 automatic arming / disarming the system can automatically arm and disarm for a requested period of a day. While in the...
Page 11
C. Multiple pressing and holding of the keys (2 or 3) will switch the bypass on – off – on – off … 4. By repeating step 3. You can bypass all required alarm sources. • to close the bypass menu press the n key. If anything is bypassed when arming, four beeps will sound and b will be displayed on the ...
Page 12
Store telephone numbers for voice message by entering: 7 xx... Xx f y where xx...Xx = telephone number y = memory number from 1 to 4 a telephone number can have a maximum of 16 digits. A dialing pause can be entered with f0 note: enter a pause (f0) after the last digit of a number, which is calling ...
Page 13: 5 System
F5 = storing of the sequence to memory 5 (32 digits can be stored to memory 5 as a maximum - separators f9 and f7 takes only 1 digit each). How the sms server woks: when activated, the control panel dials the sms server. After the connection is established, it sends the telephone number of the mobil...
Page 14
• switch the control panel to the user mode (entering f0 master code) • open the cover of the detector (keypad) • replace its batteries with new ones (use only corresponding size and good quality alkaline batteries). Wait for approximately 20 seconds before inserting batteries • close the device’s c...
Page 15
User codes and controllers section code index user name a b notes 0. Master code - supervisor 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. C1 c2 c3 c4 c5 c6 c7 c8 telephone communicator setting memory calling to tel. Number notes 1. 2. 3. 4. 5. Sms message o pager timers exit / entrance delay sec ...
Page 16
Detectors section position location in the house detectors type reaction* a b s 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Wireless detectors 16. 1. 2. 3. Wired inputs 4. * i – instant d – delayed f – fire p – panic t – tamper n – next delayed alarm system ja-63 „profi“ - 16 - mgk51501.