Jackson Systems Comfort System T-32-P Operation Manual - page 3
MODE
O/RIDE
PROG
FAN
Residential Programmable Mode
MODE Selection
MODE
Heat
Cool
Cool
Heat
E. Heat
OFF
Press the
key to cycle through the modes of
operation and the LCD will display the following:
Heat Mode
Cool Mode
Emergency heat when T-32-P is
configured for a heat pump system
Thermostat is off
Auto Changeover (Installer must
activate this mode)
Cool
Heat
MODE KEY
FAN Selection
FAN
Auto
On
Press the
key to cycle through the fan selections. More details on fan functions can be found on
page 20 of this manual.
The HVAC system fan will only run with a call for heating or cooling.
The HVAC system fan will run continuously.
FAN KEY
MODE
O/RIDE
PROG
FAN
Cool
Heat
Setting the clock
PROG
PROG
PROG
PROG
The T-32-P has a real-time clock that is used for
programming functions. It is important that the time
and day of week be set properly so that programmed
events run correctly.
To set the clock, press the
key until the hour
flashes on the LCD. Use the up ( ) or down ( ) key to
set the current hour along with the AM and PM
symbol. Press the
key again until the minutes
flash. Use the up ( ) or down ( ) key to set the
current minutes. Press the
key again until the
day flashes. Use the up ( ) or down ( ) key to set the
correct day of the week. Press the
again to
exit the clock and day of week program.
PROG
KEY
UP / DOWN
KEYS
2