Jade RJGR Installation Instructions Manual - Electrical Connection
11
ELECTRICAL CONNECTION
RJGR models require a 120 volt, 60 hertz, 15 AMP,
AC properly grounded household circuit. The circuit
must be protected with a circuit breaker or time delay
fuse.
Improper grounding can affect the spark ignition sys-
tem. If a grounded three hole outlet is not available,
have an electrician change the old outlet or install a
new one. To temporarily use a polarized and grounded
two hole outlet until a grounded three hole outlet can
be installed, a grounded three hole adapter plug can
be used. Have an electrician test the outlet for proper
grounding.
Before plugging in the range, make sure all the con-
trols, burner knobs and power switch, are in the OFF
position. To turn power switch to OFF, depress the
rocker switch, opposite to the power indicator light.
This appliance is equipped with a three prong (ground-
ing) plug for your protection against shock hazard and
should be plugged directly into a properly grounded
three prong receptacle. Do not cut or remove the
grounding prong from this plug. This appliance must
be electrically grounded in accordance with local
codes or, in the absence of local codes with the Na-
tional Electrical Code ANSI/NFA 70-latest edition. In
Canada, it must be in accordance with CSAC22.1
Canadian Electrical Code Part 1. A copy of the Na-
tional Electrical Code can be obtained by writing to :
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
S
PARK
MODULES
IGNITOR
OPEN TOPS AND
CHARBROILERS
OVEN LAMP
FAN SWITCH
POWER
SWITCH
GRIDDLE
THERMOST
AT
GRIDDLE LIGHT
VA
LVE SWITCHES
GRIDDLE
OVEN
BAKE LIGHT
FAN MOT
OR
IGNITOR
IGNITOR
BI-MET
AL
VA
LV
E
BI-MET
AL
VA
LV
E
BI-MET
AL
VA
LV
E
BROIL LIGHT
OVEN LAMP
BK
BR
OVEN
THERMOST
AT