Jade RJGR Installation Instructions Manual - Wok Burners

14

 Ignition and adjustment procedures for

  the wok burners are the same as the

  open top burners.

WOK BURNERS

CHARBROILER

½”

Similar to the open top burners, the

charbroiler uses spark ignition. To light

burner, push knob in, turn knob to HI and

then turn to LITE. To adjust burner flames,

turn air shutters. The burner flames should

be blue with 1/2" high distinct cones. It is

normal that during initial startup and when

the knob is set on HI, the first inch of the

ports are not lit.

After the burners have established and

warmed-up, the front ports will stay lit.

GRIDDLE

½” To ¾”

The griddle uses a glowbar ignition

system. To light the griddle burner, turn

power switch on. Push and turn griddle

thermostat to desired setting. The

glowbar igniter will glow and in 20

seconds the griddle burner will ignite.

The burner flames should be blue with

distinct cones 1/2" to 3/4" high. To

adjust  burner flames, loosen air shutter

screw and turn air shutter.