- DL manuals
- Jeep
- Automobile
- Grand Cherokee 2012
- Owner's Manual
Jeep Grand Cherokee 2012 Owner's Manual - page 679
Summary of Grand Cherokee 2012
Page 1
Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 20 12 gr and cher ok ee 12wk741-126-af sixth edition printed in u.S.A. 2 0 1 2.
Page 2
Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...
Page 3: Table Of Contents
Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the featu...
Page 5: Introduction
Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 5 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 6 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 8 䡵 vehicle ide...
Page 6
Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks t...
Page 7
Note: after reviewing the owner information, it should be stored in the vehicle for convenient referenc- ing and remain with the vehicle when sold. When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- nicians and genuine mopar 威 parts, and...
Page 8
Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million a...
Page 9
Introduction 7.
Page 10
Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...
Page 11
Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Right front body vin location 1 introduct...
Page 13: Contents
Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 14 ▫ wireless ignition node (win) . . . . . . . . . . . . 14 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ▫ removing key fob from ignition . . . . . . . . . . 16 ▫ ...
Page 14
▫ using the panic alarm . . . . . . . . . . . . . . . . . 26 ▫ programming additional transmitters . . . . . . 27 ▫ transmitter battery replacement . . . . . . . . . . 27 ▫ general information . . . . . . . . . . . . . . . . . . . 29 䡵 remote starting system — if equipped . . . . . . . 29 ▫ how to u...
Page 15
▫ seat belt pretensioners . . . . . . . . . . . . . . . . . 61 ▫ supplemental active head restraints (ahr) . . 61 ▫ enhanced seat belt use reminder system (beltalert 威 ) . . . . . . . . . . . . . . . . . . . . . . . . . 65 ▫ seat belt lock out . . . . . . . . . . . . . . . . . . . . 66 ▫ seat belts ...
Page 16
A word about your keys your vehicle uses a keyless ignition system. This system consists of a key fob with remote keyless entry (rke) transmitter and a wireless ignition node (win) with integral ignition switch. You can insert the key fob into the ignition switch with either side up. Keyless enter-n...
Page 17
Key fob the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores in the rear of the key ...
Page 18
To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand. Note: you can insert the double-sided emergency key into the lock cylinders with either side up. Removing key fob from ignition place the shift l...
Page 19
• the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the off position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “electronic vehi...
Page 20
Warning! (continued) • do not leave the key fob in or near the vehicle, and do not leave keyless enter-n-go in the acc or on/run mode. A child could operate power win- dows, other controls, or move the vehicle. • do not leave children or animals inside parked vehicles in hot weather. Interior heat b...
Page 21
Vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid key fob is used to start the engine. After turning the ignition switch to the on/run posi- tion, the vehicle security light will turn on for three seconds for a bulb check. If the l...
Page 22
Caution! • always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unat- tended. • with keyless enter-n-go, always remember to place the ignition in off. At the time of purchase, the original owner is provided with a four-digit personal identification number (pin). Ke...
Page 23
Audio and visual signals, the horn will sound, the head- lights will turn on, park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver’s door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn...
Page 24
• press the lock button on the exterior passive entry door handle with a valid key fob available in the same exterior zone (refer to ⬙ keyless enter-n-go ⬙ in ⬙ things to know before starting your vehicle ⬙ for further informa- tion). • press the lock button on the remote keyless entry (rke) transmi...
Page 25
• when the vehicle security alarm is armed, the interior power door lock switches will not unlock the doors. The vehicle security alarm is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If one of the previ- ously described arming se...
Page 26
Note: • the front courtesy overhead console and door cour- tesy lights will turn on if the dimmer control is in the ⬙ dome on ⬙ position (extreme top position). • the illuminated entry system will not operate if the dimmer control is in the “dome defeat” position (extreme bottom position). Remote ke...
Page 27
To unlock the doors press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Refer to “keyless enter-n-go” under “things...
Page 28
To lock the doors press and release the lock button on the rke transmit- ter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Refer to “keyless enter-n-go” under “things to know before starting your vehicle” for further information. Sound horn wi...
Page 29
Programming additional transmitters programming key fobs or rke transmitters may be performed at an authorized dealer. Transmitter battery replacement the recommended replacement battery is one cr2032 battery. Note: • perchlorate material — special handling may apply. See www.Dtsc.Ca.Gov/hazardouswa...
Page 30
2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the rke transmitter apart. Make sure not to damage the seal during removal. 3. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sig...
Page 31
4. To assemble the rke transmitter case, snap the two halves together. General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept ...
Page 32
How to use remote start all of the following conditions must be met before the engine will remote start: • shift lever in park • doors closed • hood closed • liftgate/flipper glass closed • hazard switch off • brake switch inactive (brake pedal not pressed) • ignition key removed from ignition switc...
Page 33
Remote start abort message on electronic vehicle information center (evic) — if equipped the following messages will display in the evic if the vehicle fails to remote start or exits remote start prema- turely: • remote start aborted — door ajar • remote start aborted — hood ajar • remote start abor...
Page 34
• the engine can be started two consecutive times with the rke transmitter. However, the ignition must be cycled by pushing the start/stop button twice (or the ignition switch must be cycled to the on/run position) before you can repeat the start sequence for a third cycle. To exit remote start mode...
Page 35
Remote start comfort systems — if equipped when remote start is activated, the heated steering wheel, and driver heated seat features will automatically turn on in cold weather. In warm weather, the driver vented seat feature will automatically turn on when the remote start is activated. These featu...
Page 36
Warning! • for personal security and safety in the event of an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or...
Page 37
If you press the door lock switch while the key fob is in the ignition switch and the driver’s door is open, the doors will not lock. If a rear door is locked, it cannot be opened from inside the vehicle without first unlocking the door. The door may be unlocked manually by raising the lock knob. Au...
Page 38
3. Repeat steps 1 and 2 for the opposite rear door. Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged (locked). Child-protection door lock location child-protection door lock functi...
Page 39
Note: for emergency exit from the rear seats when the child-protection door lock system is engaged, manually raise the door lock knob to the unlocked position, roll down the window, and open the door using the outside door handle. Keyless enter-n-go the passive entry system is an enhancement to the ...
Page 40
To unlock from the driver’s side: with a valid passive entry rke transmitter within 5 ft (1.5 m) of the driver’s door handle, grab the driver’s front door handle to unlock the driver’s door automatically. The interior door panel lock knob will raise when the door is unlocked. Note: if “unlock all do...
Page 41
Preventing inadvertent locking of passive entry rke transmitter in vehicle to minimize the possibility of unintentionally locking a passive entry rke transmitter inside your vehicle, the passive entry system is equipped with an automatic door unlock feature which will function if there is no key fob...
Page 42
Note: if “unlock all doors 1st press” is programmed in evic, all doors will unlock when you push the button on the liftgate. If ⬙ unlock driver door 1st press ⬙ is programmed in evic, the liftgate and flipper glass will unlock when you press the button on the liftgate for further information, refer ...
Page 43
Note: • after pressing the door handle lock button, you must wait two seconds before you can lock or unlock the doors, using either passive entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • the pas...
Page 44
Warning! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with keyless enter- n-go in the acc or on/run position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may ...
Page 45
During auto up. If this happens, pull the switch lightly to the first detent and hold it to close the window manually. Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the auto up feature should the au...
Page 46
Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and ...
Page 47
Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate. Note: the liftgate flipper glass will not open if the liftgate is ajar. Once the liftgate flipper glass has been opened, ...
Page 48
Power liftgate — if equipped the power liftgate may be opened by pulling up on the liftgate handle or by pressing the liftgate button on the remote keyless entry (rke) transmitter. Press the liftgate button on the rke transmitter twice within five seconds, to open the power liftgate. Once the liftga...
Page 49
Warning! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. Note: • the power liftgate will not operate if the liftgate flipper glass is open. • the power liftgate buttons will...
Page 50
• if the liftgate handle is pulled while the power liftgate is opening, the liftgate motor will disengage to allow manual operation. • if the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and the liftgate must be opened or closed manu- ally...
Page 51
Occupant restraints some of the most important safety features in your vehicle are the restraint systems: • three-point lap and shoulder belts for the driver and all passengers • advanced front air bags for driver and front passen- ger • supplemental active head restraints (ahr) located on top of th...
Page 52
Infant and child restraint systems. For more information on latch, refer to lower anchors and tether for children (latch). Note: the advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severit...
Page 53
3. The driver and front passenger seats should be moved back as far as practical to allow the advanced front air bags room to inflate. 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between...
Page 54
Warning! (continued) • supplemental side air bag inflatable curtain (sabic) and seat-mounted side air bags (sab) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • in a collision, you and your passengers can suffer much greater injuries if you...
Page 55
Warning! • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. Wearing your belt in the wrong place could make your injuries in a collision much wo...
Page 56
2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “cli...
Page 57
Warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you properly. In a sudden stop...
Page 58
4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. Wa...
Page 59
6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow it to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protection. In...
Page 60
Adjustable upper shoulder belt anchorage in the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the anchorage, and then move it up or down to the position that fits you best. As a guide, if yo...
Page 61
Additional information, refer to “installing child re- straints using the vehicle seat belt” under the “child restraints” section. The chart below defines the type of feature for each seating position. Driver center passenger first row n/a n/a alr second row alr alr alr third row n/a n/a n/a • n/a —...
Page 62
How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in t...
Page 63
Seat belt pretensioners the seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by assuring that the belt is tight about the oc...
Page 64
However if during a front impact, a secondary rear impact occurs, the ahr may deploy based on several factors, including the severity and type of the impact. Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed i...
Page 65
1. Grasp the deployed ahr from the rear seat. 2. Position the hands on the top of the deployed ahr at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand positioning points on ahr 1 — downward movement 2 — rearward moveme...
Page 66
4. The ahr front soft foam and trim half should lock into the back decorative plastic half. Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an autho...
Page 67
Enhanced seat belt use reminder system (beltalert 姞 ) beltalert 威 is a feature intended to remind the driver and front passenger (if equipped with front passenger beltalert 威 ) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unb...
Page 68
Seat belt lock out the center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged. Seat belts and pregnant women we recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the moth...
Page 69
Instrument panel, above the glove compartment. The words srs airbag are embossed on the air bag covers. Note: the driver and front passenger advanced front air bags are certified to the new federal regulations for advanced air bags. The advanced front air bags have a multistage inflator design. This...
Page 70
This vehicle is equipped with supplemental seat- mounted side air bags (sab) to provide enhanced protection for an occupant during a side impact. The supplemental seat-mounted side air bags are located in the outboard side of the front seats. Note: • air bag covers may not be obvious in the interior...
Page 71
Advanced front air bag features the advanced front air bag system has multistage driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as determined by the occupant restraint controller (orc), which may receive information from the front i...
Page 72
Supplemental seat-mounted side air bags (sab) supplemental seat-mounted side air bags (sab) may provide enhanced protection to help protect an occupant during a side impact. The sab is marked with an air bag label sewn into the outboard side of the front seats. When the air bag deploys, it opens the...
Page 73
Note: • air bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • being too close to the sab and sabic air bags during deployment could cause you to be severely injured or killed. • should a vehicle rollover occur, the pretensioners and/or sab and sabic ...
Page 74
Warning! (continued) • do not use accessory seat covers or place objects between you and the side air bags; the perfor- mance could be adversely affected and/or objects could be pushed into you, causing serious injury. • your vehicle is equipped with sabic air bags, do not have any accessory items i...
Page 75
Advanced front air bags are designed to provide addi- tional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision. Advanced front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The adva...
Page 76
Also, the orc turns on the air bag warning light in the instrument panel for approxi- mately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the air bag warning light will turn off. If the orc detects a malfunction in any part of the system, it turn...
Page 77
Are possible, based on the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds. This is about half of the...
Page 78
A quantity of non-toxic gas is generated to inflate the sabic. The inflating sabic pushes the outside edge of the headliner out of the way and covers the window. The sabic inflates in about 30 milliseconds (about one- quarter of the time that it takes to blink your eyes) with enough force to injure ...
Page 79
• unlock the doors automatically. In order to reset the enhanced accident response system functions after an event, the ignition switch must be changed from ign on to ign off. If a deployment occurs the advanced front air bags are designed to deflate immediately after deployment. Note: front and/or ...
Page 80
Warning! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retrac- tor assemblies replaced by an authorized dealer im- mediately. Also, have the occupant restraint con- troller (orc) system servi...
Page 81
Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, includ- ing your trim cover and cushio...
Page 82
Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of t...
Page 83
To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. ...
Page 84
Infants and child restraints safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carrie...
Page 85
Warning! (continued) • a rearward-facing infant restraint should only be used in a rear seat. A rearward-facing infant re- straint in the front seat may be struck by a deploy- ing passenger air bag which may cause severe or fatal injury to the infant. Here are some tips for getting the most out of y...
Page 86
Warning! When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden stop or accident, it could strike the occupants or seatbacks and cause serious personal injury. Note: for additional informat...
Page 87
Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat. • make sure that the child is upright ...
Page 88
Note: when using the latch attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never lea...
Page 89
The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seatback, and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat c...
Page 90
Warning! Do not use the cargo tie downs located on the load floor. Improper usage of the tether can lead to a failure of an infant or child restraint. The child could be badly injured or killed. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having...
Page 91
Gap panel. They are not visible until you fold the gap panel down. Do not use the cargo tie down hooks located on the floor behind the seat. Finally, tighten all three straps as you push the child restraint rearward and downward into the seat, removing slack in the straps according to the child rest...
Page 92
Installing a child restraint with an alr: 1. To install a child restraint with alr, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a “click.” next, extract all the seat belt...
Page 93
Pull down on the tether to unhook it from the plastic seat backing, then raise the armrest and attach the tether hook to the strap located on the front of the arm rest. For center seating position route the tether strap over the seatback and headrest then attach the hook to the tether anchor located...
Page 94
Top tether strap anchorage (located on seatback) top tether strap mounting 92 things to know before starting your vehicle.
Page 95
Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly be- hind the child seat to secure a child restraint top tether strap. • do not use the cargo tie downs located on the load floor. Improper usag...
Page 96
While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving t...
Page 97
Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), whi...
Page 98
Vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger c...
Page 99
Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...
Page 100
Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...
Page 101: Contents
Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 ▫ inside day/night mirror . . . . . . . . . . . . . . . 107 ▫ automatic dimming mirror — if equipped . . 107 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . 108 ▫ o...
Page 102
▫ phone call features . . . . . . . . . . . . . . . . . . 131 ▫ uconnect™ phone features . . . . . . . . . . . . . 134 ▫ advanced phone connectivity . . . . . . . . . . . 138 ▫ things you should know about your uconnect™ phone . . . . . . . . . . . . . . . . . . . . 140 ▫ general information . . . ....
Page 103
䡵 driver memory seat — if equipped . . . . . . . . 174 ▫ setting memory positions and linking remote keyless entry transmitter to memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 ▫ memory position recall . . . . . . . . . . . . . . . . 176 ▫ to disable a rke transmitter linked to mem...
Page 104
▫ lane change assist . . . . . . . . . . . . . . . . . . . 188 ▫ flash-to-pass . . . . . . . . . . . . . . . . . . . . . . . 188 ▫ high/low beam switch . . . . . . . . . . . . . . . 189 䡵 windshield wipers and washers . . . . . . . . . . 189 ▫ windshield wiper operation . . . . . . . . . . . . 190 ▫...
Page 105
▫ to cancel . . . . . . . . . . . . . . . . . . . . . . . . . . 207 ▫ to turn off . . . . . . . . . . . . . . . . . . . . . . . . 208 ▫ to resume speed . . . . . . . . . . . . . . . . . . . . 208 ▫ to vary the speed setting . . . . . . . . . . . . . . 209 ▫ setting the following distance in acc . . ...
Page 106
▫ turning parkview 威 on or off — without navigation/multimedia radio . . . . . . . . . . . 240 䡵 overhead console . . . . . . . . . . . . . . . . . . . . . 240 ▫ front map/reading lights . . . . . . . . . . . . . 240 ▫ sunglass bin door . . . . . . . . . . . . . . . . . . . 241 䡵 garage door opener ...
Page 107
䡵 commandview 威 sunroof with power shade — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 254 ▫ opening sunroof — express . . . . . . . . . . . . 255 ▫ opening sunroof — manual mode . . . . . . . . 255 ▫ closing sunroof — express . . . . . . . . . . . . . 255 ▫ closing sunroof — man...
Page 108
䡵 cargo area features . . . . . . . . . . . . . . . . . . . 268 ▫ rechargeable flashlight . . . . . . . . . . . . . . . . 268 ▫ cargo storage bins . . . . . . . . . . . . . . . . . . . 270 ▫ retractable cargo area cover — if equipped . . . . . . . . . . . . . . . . . . . . . . . . 271 ▫ cargo tie-do...
Page 109
Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield). Headlight glare can be reduced b...
Page 110
In the button will illuminate to indicate when the dim- ming feature is activated. The mirror is twisted on the windshield button counterclockwise and requires no tools for mounting. Note: this feature is disabled when the vehicle is moving in reverse. Caution! To avoid damage to the mirror during c...
Page 111
Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or...
Page 112
Power mirrors the power mirror switch is located on the driver’s side door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a mirror, press the mirror select button for the mirror that you want to adjust. Using the mirror contro...
Page 113
Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. Refer to “rear window features” in “understanding the features of your vehicle” for fur- ther information. Tilt mirrors in reverse (available with mem...
Page 114
Lift the cover to reveal the mirror. The light will turn on automatically. Sun visor extension — if equipped this feature has a pull out extension on the sun visor for increased coverage. Blind spot monitoring — if equipped the blind spot monitoring (bsm) system uses two radar- based sensors, locate...
Page 115
When the vehicle is started, the bsm warning light will momentarily illuminate in both outside rear view mirrors to let the driver know that the system is operational. The bsm system sensors operate when the vehicle is in any forward gear or reverse and enters stand by mode when the vehicle is in pa...
Page 116
The area on the rear fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the bsm system can function properly. Do not block the area of the rear fascia where the radar sensors are located with foreign objects (bum- per stickers, bicycle racks...
Page 117
The bsm system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary. The bsm system will issue an alert during these types of zone entries. Entering from the side vehicles that move into your adjacent lanes from either side o...
Page 118
Entering from the rear vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking traffic if you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains ...
Page 119
The bsm system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service. Overtaking/passing stationary objects 3 unders...
Page 120
The bsm system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Warning! The blind spot monitoring system is only an aid to help detect objects in the blind spot zones. The bsm system is not designed to detect pedestrians, bicy- clists, or ...
Page 121
Rcp monitors the rear detection zones on both sides of the vehicle, for objects that are moving toward the side of the vehicle with a minimum speed of approximately 1 to 2 mph (1 km/h to 3 km/h), to objects moving a maxi- mum of approximately 10 mph (16 km/h), such as in parking lot situations. Note...
Page 122
Modes of operation three selectable modes of operation are available in the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)/personal settings (customer-programmable features)” in “under- standing your instrument panel” for further information. Bli...
Page 123
Blind spot alert off when the bsm system is turned off there will be no visual or audible alerts from either the bsm or rcp systems. Note: the bsm system will store the current operating mode when the vehicle is shut off. Each time the vehicle is started the previously stored mode will be recalled a...
Page 124
Uconnect™ phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The uconnect™ phone is driven through your bluetooth 威 “hands-free profile” mobile phone. Uconnect™ featur...
Page 125
Voice command button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect™ phone can be used with any hands-free profile certified bluetooth 威 mobile phone. See the uconnect™ website for supported phones. Refer to your mobile...
Page 126
Example, you can use the compound form voice command “phonebook new entry”, or you can break the compound form command into two voice com- mands: “phonebook” and “new entry”. Please re- member, the uconnect™ phone works best when you talk in a normal conversational tone, as if speaking to someone si...
Page 127
• when prompted, after the beep, say “pair a device” and follow the audible prompts. • you will be asked to say a four-digit personal identi- fication number (pin), which you will later need to enter into your mobile phone. You can enter any four-digit pin. You will not need to remember this pin aft...
Page 128
• the uconnect™ phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by saying a name • press the button to begin. • after the “ready” prompt and the following beep, say “call”. • the system will prompt you to say the name of the person you...
Page 129
• when prompted, enter the number designation (e.G., “home”, “work”, “mobile”, or “other”). This will allow you to store multiple numbers for each phone- book entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an ent...
Page 130
• depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previously downloaded phonebook is avail- able for use. • only the phonebook of the currently connected mobile phone is accessible. • ...
Page 131
After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. “phonebook edit entry” can be used to add another phone number to a name entry that already exists in the p...
Page 132
Delete/erase “all” uconnect™ phonebook entries • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all”. • the uconnect™ phone will ask you to verify that you wish to delete all the entries from the phonebook. • after confirmation, the phonebook entri...
Page 133
Phone call features the following features can be accessed through the uconnect™ phone if the feature(s) are available on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the uconnect™ phone. Check with your mobile se...
Page 134
In progress. To go back to the first call, refer to “toggling between calls” in this section. To combine two calls, refer to “conference call” in this section. Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hol...
Page 135
Call termination to end a call in progress, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically. This is ...
Page 136
Uconnect™ phone features language selection to change the language that the uconnect™ phone is using: • press the button to begin. • after the “ready” prompt and the following beep, say the name of the language you wish to switch to english, espanol, or francais. • continue to follow the system prom...
Page 137
Canada and 060 for mexico). The number dialed may not be applicable with the available mobile service and area. • if supported, this number may be programmable on some systems. To do this, press the button and say “setup”, followed by “emergency”. • the uconnect™ phone does slightly lower your chanc...
Page 138
Paging to learn how to page, refer to “working with automated systems”. Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the uconnect™ phone. Voice mail calling to learn how to access your voice mail, refer to “working with automate...
Page 139
The uconnect™ phone will then send the corresponding phone number associated with the phonebook entry, as tones over the phone. Note: • you may not hear all of the tones due to mobile phone network configurations. This is normal. • some paging and voice mail systems have system time out settings tha...
Page 140
Dialing using the mobile phone keypad you can dial a phone number with your mobile phone keypad and still use the uconnect™ phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired bluetooth 威 mobil...
Page 141
From your uconnect™ phone paired mobile phone to the uconnect™ phone or vice versa, press the button and say “transfer call”. Connect or disconnect link between the uconnect™ phone and mobile phone your mobile phone can be paired with many different electronic devices, but can only be actively “conn...
Page 142
• the selected phone will be used for the next phone call. If the selected phone is not available, the uconnect™ phone will return to using the highest priority phone present in or near (approximately within 30 ft (9 m)) the vehicle. Delete uconnect™ phone paired mobile phones • press the button to ...
Page 143
You can either press the uconnect™ phone button to restore the factory setting or repeat the words and phrases when prompted by the uconnect™ phone. For best results, the voice training session should be com- pleted when the vehicle is parked with the engine running, all windows closed, and the blow...
Page 144
• fully closed windows, • dry weather condition. • even though the system is designed for users speaking in north american english, french, and spanish ac- cents, the system may not always work for some. • when navigating through an automated system such as voice mail, or when sending a page, at the...
Page 145
• fully closed windows, • dry weather conditions, and • operation from the driver’s seat. • performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the uconnect™ phone. • echo at the phone far end can sometimes be reduced by lowering the in-veh...
Page 146
Send messages: you can send messages using uconnect™ phone. To send a new message: • press the button. • after the “ready” prompt and the following beep, say “sms send” or “send message.” • you can either say the message you wish to send or say “list messages.” there are 20 preset messages. To send ...
Page 147
16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call 20. Start without me turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming mes- sages. • press the button. • after the “ready” prompt and th...
Page 148
146 understanding the features of your vehicle.
Page 149
3 understanding the features of your vehicle 147.
Page 150
148 understanding the features of your vehicle.
Page 151
Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 3 understa...
Page 152
Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...
Page 153
General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....
Page 154
If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system is speaking is known as “barging in.” the system will be interrupted, and after the beep, you can add or chan...
Page 155
3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different than the audio system. Main menu start a dialogue by pressing the voice command button. You may say “main menu” t...
Page 156
• “menu radio” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the following com- mands: • “channel number” (to change the channel by its spoken number) • “next chann...
Page 157
− “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play previously recorded memos) — during the playback you may press the voice command button to stop playing memos. You proceed by saying one of the following commands: − “repeat” (to repeat a memo) − “next”...
Page 158
Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice training” feature may be used. 1. Press the voice command button, say “system setup” and once you are in that menu then say “voice training.” this will train your...
Page 159
Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...
Page 160
Reclining the seatback the angle of the seatback can be adjusted forward or backward. Push the seatback switch forward or rear- ward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Warning! • adjusting a seat while driving may be dan...
Page 161
Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when you have reached the desired position. Adjusting the seat up or down the height of the seats...
Page 162
Caution! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. Power lumbar — if equipped vehicles equipped with power driver or passenger seat...
Page 163
Manual front seats forward/rearward adjustment some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under t...
Page 164
Manual front passenger seatback adjustment — recline to adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the sea...
Page 165
Heated seats — if equipped on some models, the front and rear seats may be equipped with heaters in both the seat cushions and seatbacks. Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, ex- ha...
Page 166
Programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to know before starting your vehicle” for further informa- tion. Front heated seats there are two heated seat switches that allow the driver and passenger to operate the seats independently. The c...
Page 167
You can choose from high, low or off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for high, one for low and none for off. Press the switch once to select high-level heating. Press the switch a second time to select low-l...
Page 168
Ventilated seats — if equipped on some models, both the driver and passenger seats are ventilated. Located in the seat cushion and seatback are small fans that draw the air from the passenger compart- ment and blow air through fine perforations in the seat cover to help keep the driver and front pas...
Page 169
Warning! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious in...
Page 170
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. For comfort the active head restraints can be tilted forward and rearward. To tilt the head restrain...
Page 171
Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head re...
Page 172
Warning! (continued) • active head restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the ac- tive head restraint ensure that all cargo is se- cured, as loose cargo could contact the active head restraint during sudden st...
Page 173
Warning! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the outboard head re- straints are in their upright positions when the seat is to be occupied. Note: for proper routing of a child seat tether refer to ...
Page 174
2. Fold the rear seat completely forward. To raise rear seat raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Warning! • be certain that the seatback is ...
Page 175
Reclining rear seat to recline the seatback, lift the lever located on the outboard side of the seat, lean back and release the lever at the desired position. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the seatback reclined so that the shoul...
Page 176
Driver memory seat — if equipped once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror, adjustable steering wheel posi- tion (if equipped), and the radio station preset settings. Your remote keyless entry (rke) transmi...
Page 177
Setting memory positions and linking remote keyless entry transmitter to memory note: each time the s (set) button and a numbered button 1 or 2 are pressed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key, and turn the ignition switch to the on/run posit...
Page 178
11. Select ⬙ remote linked to memory ⬙ in the electronic vehicle information center (evic) and enter ⬙ yes ⬙ . Refer to “electronic vehicle information center (evic)/ customer-programmable features” in “understanding your instrument panel” for further information. 12. Repeat the above steps to set t...
Page 179
3. Press and release the memory s (set) button located on the driver’s door. 4. Within five seconds, press and release memory button 1 on the driver’s door. 5. Within five seconds, press and release the unlock button on the rke transmitter. To disable another rke transmitter linked to either memory ...
Page 180
Driving position when the key is placed into the ignition, and turned out of the lock position toward the acc/on position. The easy entry/exit feature will be automatically dis- abled if the seat is already positioned closer than 0.9 in (23 mm) forward of the rear stop. At this position, there is no...
Page 181
2. Reach under the hood, move safety latch to the left and lift the hood. Caution! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. Warning! Be sure the hood is fully latched before driving your vehic...
Page 182
Lights headlight switch the headlight switch is located on the left side of the instrument panel, next to the steering wheel. The head- light switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). To turn on the headlights...
Page 183
Caution! Do not use abrasive cleaning components, solvents, steel wool or other abrasive materials to clean the lenses. Automatic headlights — if equipped this system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch to...
Page 184
Note: when your headlights come on during the daytime, the instrument panel lights will automatically dim to the lower nighttime intensity. Refer to “lights” in this section for further information. Smartbeam™ — if equipped the smartbeam™ system provides increased forward lighting at night by automa...
Page 185
2. Push back on the multifunction lever once again to reactivate the system. Note: broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions (sticker, toll box, e...
Page 186
The headlight delay time is programmable on vehicles equipped with an electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)/customer-programmable features” in “under- standing your instrument panel” for further information. Parking lights and panel ligh...
Page 187
Interior lights courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the right side of the headlight switch) is rotated to the its farthest upward position, or if equipped, when the unlock button is pressed on the remote keyless entry (rk...
Page 188
Lights-on reminder if the headlights, parking lights, or cargo lights are left on after the ignition is turned off, a chime will sound when the driver’s door is opened. Battery saver to protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights. I...
Page 189
Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second time. The lights will also turn on when the unlock button on the remote keyless entry (rke) is pressed. Ambient light...
Page 190
Multifunction lever the multifunction lever is located on the left side of the steering column. Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light re...
Page 191
High/low beam switch push the multifunction lever toward the instrument panel to switch the headlights to high beam. Pulling the multifunction back toward the steering wheel will turn the low beams back on, or shut the high beams off. Windshield wipers and washers the windshield wiper/washer control...
Page 192
Windshield wiper operation rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. Caution! Always remove any buildup of snow that prevents the windshield wiper blades fro...
Page 193
Note: if the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield washer operation to use the washer, push on the end of the lever (toward the steering wheel) and hold while spray is desired. If the lever is pushed while in the intermittent setting, the wipers will t...
Page 194
Warning! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Mist use the mist...
Page 195
The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least sensitive, and wiper delay position 4 is the most sensi- tive. Setting 3 should be used for normal rain conditions. Settings 1 and 2 can be used if the driver desires less wiper sensitivit...
Page 196
• transmission in neutral position — when the ignition is on, and the transmission is in the neu- tral position, the rain sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the neutral position. Tilt/teles...
Page 197
Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this war...
Page 198
Note: for vehicles equipped with driver memory seat, you can use your remote keyless entry (rke) transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre-programmed positions. Refer to “driver memory seat” in this section for further infor...
Page 199
Note: the engine must be running for the heated steering wheel to operate. Vehicles equipped with remote start on models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to kn...
Page 200
The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic ...
Page 201
To set a desired speed turn the electronic speed control on. When the vehicle has reached the desired speed, press the set (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. Note: the vehicle should be traveling at a steady speed and on level ground b...
Page 202
To accelerate for passing press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using electronic speed control on hills the transmission may downshift on hills to maintain the vehicle set speed. Note: the electronic speed control system ma...
Page 203
Adaptive cruise control (acc) — if equipped adaptive cruise control (acc) increases the driving convenience provided by cruise control while traveling on highways and major roadways. However, it is not a safety system and not designed to prevent collisions. Acc will allow you to keep cruise control ...
Page 204
Warning! (continued) • the acc system: − does not react to pedestrians, oncoming ve- hicles, and stationary objects (e.G., a stopped ve- hicle in a traffic jam or a disabled vehicle). − cannot take street, traffic, and weather condi- tions into account, and may be limited upon ad- verse sight distan...
Page 205
The cruise control system has two control modes: • adaptive cruise control mode for maintaining an appropriate distance between vehicles. • normal (fixed speed) cruise control mode for cruising at a constant preset speed. For additional information, refer to “normal (fixed speed) cruise control mode...
Page 206
Note: any chassis/suspension modifications to the vehicle will effect the performance of the adaptive cruise control. Activating adaptive cruise control (acc) you can only activate acc if the vehicle speed is above 20 mph (32 km/h). When the system is turned on and in the ready state, the electronic...
Page 207
To activate push and release the on/off button. The acc menu in the evic displays “adaptive cruise ready.” to turn the system off, push and release the on/off button again. At this time, the system will turn off and the evic will display “adaptive cruise control off.” warning! Leaving the adaptive c...
Page 208
To set a desired acc speed when the vehicle reaches the speed desired, push the set - button and release. The evic will display the set speed. Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • the message “drive...
Page 209
To cancel the system will disable acc without erasing the memory if: • you softly tap the brake pedal. • you depress the brake pedal. • you press the cancel switch. • an anti-lock brake system (abs) event occurs. • a trailer sway control (tsc) event occurs. • if the transmission is shifted into neut...
Page 210
Note: if acc is resumed or set with the esc/tcs off, esc will automatically be re-engaged. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you switch to four-wheel drive low. To resume speed press the res + butto...
Page 211
To vary the speed setting while acc is set, you can increase the set speed by pressing and holding the res + button. If the button is continually pressed, the set speed will continue to in- crease in 5 mph (8 km/h) increments until the button is released. The increase in set speed is reflected in th...
Page 212
Setting the following distance in acc the specified following distance for acc can be set by varying the distance setting between 3 (long), 2 (me- dium), and 1 (short). Using this distance setting and the vehicle speed, acc calculates and sets the distance to the vehicle ahead. This distance setting...
Page 213
To change the distance setting, press the distance button and release. Each time the button is pressed, the distance setting adjusts between long, medium, and short. If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the ev...
Page 214
• the system disengages. (refer to the information on acc activation). The maximum braking applied by acc is limited; how- ever, the driver can always apply the brakes manually, if necessary. Note: the brake lights will illuminate whenever the acc system applies the brakes. A proximity warning will ...
Page 215
Adaptive cruise control (acc) menu the evic displays the current acc system settings. The evic is located in the upper part of the instrument cluster between the speedometer and the tachometer. The information it displays depends on acc system status. Press the menu button (located on the steer- ing...
Page 216
The acc screen will display once again if any acc activity occurs, which may include any of the following: • set speed change • distance setting change • system cancel • driver override • system off • acc proximity warning • acc unavailable warning the evic will return to the last display selected a...
Page 217
Note: if the acc “clean radar sensor in front of vehicle” warning is active normal (fixed speed) cruise control is still available. For additional information refer to “normal (fixed speed) cruise control mode” in this section. If weather conditions are not a factor, the driver should examine the se...
Page 218
• do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an acc system failure or malfunction. When the condition that deactivated the system is no longer present, the system will return to the “adaptive cruise control of...
Page 219
Note: do not change the adjustment fasteners or pull the sensor off of the bracket. Doing so may misalign the sensor. Store the sensor and bracket assembly in a safe location. The wiring and connector must be stowed properly after the sensor and bracket assembly is removed. A connector plug is stowe...
Page 220
Service acc warning if the system turns off, and the evic displays “acc/ fcw unavailable service radar sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer. Precautions while driving w...
Page 221
Offset driving acc may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly. Tur...
Page 222
Using acc on hills when driving on hills, acc may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, acc perfor- mance may be limited. Lane changing acc will not detect a vehicle until it is completely in the lane in which you...
Page 223
Narrow vehicles some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be suffi- cient distance to the vehicle ahead. 3 understanding the features of your vehicle 221.
Page 224
Stationary objects and vehicles acc does not react to stationary objects and stationary vehicles. For example, acc will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if nece...
Page 225
Warning! In the normal cruise control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is ...
Page 226
To resume press the res + button and then remove your foot from the accelerator pedal. The evic will display the last set speed. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you engage four-wheel drive low. If...
Page 227
Note: • the minimum speed for fcw activation is 10 mph (16 km/h). • when entering or driving in a curve, the fcw alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course predic- tion. This is expected and is a part of normal fcw activation and func...
Page 228
Fcw settings can only be changed when the vehicle is in park. The default status of fcw is the “far” setting, this allows the system to warn you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction time. Changing the fcw status to the “...
Page 229
Changing the fcw status to “off” prevents the system from warning you of a possible collision with the vehicle in front of you. Note: in the “off” setting fcw off will be displayed in the evic. Note: • the system will retain the last setting selected by the driver after ignition shut down. Example o...
Page 230
• fcw will not react to irrelevant objects such as over- head objects, ground reflections, objects not in the path of the car, stationary objects that are far away, oncom- ing traffic, or leading vehicles with the same or higher rate of speed. • fcw will be disabled like acc below with the un- avail...
Page 231
Parksense 姞 rear park assist — if equipped the parksense 威 rear park assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.G. During a parking maneuver. Refer to parksense 威 system usage precautions for limitations of...
Page 232
The parksense 威 warning display is located in the instru- ment cluster’s evic display. It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. Parksense 姞 display when the vehicle is in reverse, the warning display will turn on ...
Page 233
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. Park assist system off slow tone 3 under...
Page 234
The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: fast tone continuous tone 232 understanding the features of your vehicle.
Page 235
Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous display message park assist system on warning object detected warning object de...
Page 236
“electronic vehicle information center (evic)” in “un- derstanding your instrument panel” for further informa- tion. When the shift lever is moved to reverse and the system is disabled, the evic will display the “park assist system off” message for as long as the vehicle is in reverse. The parksense...
Page 237
Parksense 姞 system usage precautions note: • ensure that the rear bumper is free of snow, ice, mud, dirt and debris to keep the parksense 威 system operat- ing properly. • jackhammers, large trucks, and other vibrations could affect the performance of parksense 威 . • when you turn parksense 威 off, th...
Page 238
• on vehicles equipped with a tailgate, parksense 威 should be disabled when the tailgate is in the lowered or open position and the vehicle is in reverse. A lowered tailgate could provide a false indication that an obstacle is behind the vehicle. Caution! • parksense 威 is only a parking aid and it i...
Page 239
Warning! (continued) • before using the parksense 威 rear park assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles becau...
Page 240
When displayed, static grid lines will illustrate the width of the vehicle while a dashed center-line will indicate the center of the vehicle to assist with aligning to a hitch/ receiver. The static grid lines will show separate zones that will help indicate the distance to the rear of the vehicle. ...
Page 241
Warning! Drivers must be careful when backing up even when using the parkview 威 rear back up camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up. You are responsible for the safety of your...
Page 242
4. Enable or disable the rear camera feature by selecting the “enable rear camera in reverse” soft-key. 5. Press the “save” soft-key. Turning parkview 姞 on or off — without navigation/multimedia radio 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 3. Enable or disable the rear came...
Page 243
To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the unlock button on the rke is pressed. Sunglass bin door at the front of the console a compartment is provided for the storage of a pair of sunglasses. The stora...
Page 244
Garage door opener — if equipped homelink 威 replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The homelink 威 unit is powered by your vehicles 12 volt battery. The homelink 威 buttons, located on either t...
Page 245
Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Before you begin programming homelink 姞 be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is rec...
Page 246
Programming a rolling code for programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “learn” or “train” button located where the hanging antenna is attached to the garage door opener. It is not the button that is normally used to open...
Page 247
3. Simultaneously press and hold both the homelink 威 button you want to program and the hand-held transmit- ter button. 4. Continue to hold both buttons and observe the indi- cator light. The homelink 威 indicator will flash slowly and then rapidly after homelink 威 has received the fre- quency signal...
Page 248
2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. Without releasing the button proceed with “program- ming a rolling code” step 2 and follow all remaining steps. Programming a non-rolling code for programming gar...
Page 249
Reprogramming a single homelink 威 button to reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the on/run position. 2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the but...
Page 250
4. Watch for the homelink 威 indicator to change flash rates. When it changes, it is programmed. It may take up to 30 seconds or longer in rare cases. The garage door may open and close while you are programming. 5. Press and hold the programmed homelink 威 button and observe the indicator light. • if...
Page 251
Security it is advised to erase all channels before you sell or turn in your vehicle. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all channels will be erased. Individual channels cannot be erased. The homelink 威 universal transceiver i...
Page 252
Warning! • your motorized door or gate will open and close while you are programming the universal trans- ceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” fea...
Page 253
Power sunroof — if equipped the power sunroof switch is located between the sun visors on the overhead console. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating t...
Page 254
Opening sunroof — express press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- cally. This is called “express open”. During express open operation, any movement of the sunroof switch ...
Page 255
Note: if three consecutive sunroof close attempts re- sult in pinch protect reversals, the fourth close attempt will be a manual close movement with pinch protect disabled. Venting sunroof — express press and release the vent button within one half second and the sunroof will open to the vent positi...
Page 256
Ignition off operation the power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned off. Opening either front door will cancel this feature. The time is programmable. Refer to “elec- tronic vehicle information center (evic)/personal set- ting...
Page 257
Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in a collision, there is a gre...
Page 258
Position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will stop the sunroof. Closing sunroof — manual mode to close the sunroof, press and hold the switch in the forward position. Any release of the...
Page 259
Pinch protect feature this feature will detect an obstruction in the opening of the sunroof during express close operation. If an ob- struction is detected, the sunroof will automatically re- tract. Remove the obstruction if this occurs. Next, press the switch forward and release to express close. N...
Page 260
The ignition switch has been turned off. Refer to “elec- tronic vehicle information center (evic)/customer- programmable features (system setup)” in “under- standing your instrument panel” for further information. Note: opening either front door will cancel this feature. Sunroof fully closed press t...
Page 261
The front power outlet is located inside the storage area on the center stack of the instrument panel. Push inward on the storage lid to open the compartment and gain access to this power outlet. In addition to the front power outlet, there is also a power outlet located in the storage area of the c...
Page 262
The rear power outlet is located in the right rear cargo area. Note: the rear power outlet can be switched to “battery” powered all the time by switching the power outlet right rear quarter panel fuse in the fuse panel. Rear power outlet power outlet right rear quarter panel fuse 260 understanding t...
Page 263
Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...
Page 264
Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • ac...
Page 265
The power inverter is designed with built-in overload protection. If the power rating of 150 watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximat...
Page 266
Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled it may cause an electric shock and failure. Cupholders there are two cuphold...
Page 267
There are two cupholders for the rear seat passengers located in the fold-down center armrest. Storage glove compartment the glove compartment is located on the right side of the instrument panel. Rear cupholders glove compartment 3 understanding the features of your vehicle 265.
Page 268
To open the glove compartment, pull outward on the latch and lower the glove box door. Door storage large storage areas are built into the door panels for easy access. Opened glove compartment door panel storage 266 understanding the features of your vehicle.
Page 269
Center console the center console contains both an upper and a lower storage area. To open the upper storage compartment, pull upward on the small latch located on the lid. Storage compartment storage compartment latches 3 understanding the features of your vehicle 267.
Page 270
Lift upward on the larger of the latches to access the lower storage compartment. Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices whi...
Page 271
Press in on the flashlight to release it. To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Press and release three-press switch 3 understanding the features of your vehicle 269.
Page 272
Cargo storage bins there are four removable storage bins located in the rear cargo area. There are two storage bins located on either side of the cargo area. Two additional storage bins are located under the load floor. To access the lower storage bins, raise the load floor and attach the tether hoo...
Page 273
Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo area. 2. Insert the...
Page 274
3. The liftgate may be opened with the cargo cover in place. Warning! In a collision, a loose cargo cover in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remo...
Page 275
Cargo tie-down hooks the cargo tie-downs, located on the cargo area floor, should be used to safely secure loads when the vehicle is moving. Warning! • to help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying ...
Page 276
Warning! (continued) • do not carry loads which exceed the load limits described on the label attached to the left door or left door center pillar. • always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • place as much cargo as possible in front of...
Page 277
Rotate the center portion of the lever upward to the first detent for intermittent operation and to the second detent for continuous rear wiper operation. Rotating the center portion upward once more will activate the washer pump which will continue to operate as long as the switch is held. Upon rel...
Page 278
Note: to prevent excessive battery drain, use the rear window defroster only when the engine is operating. Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior su...
Page 279
To move the crossbars, loosen the attachments, located at the upper edge of each crossbar, approximately eight turns using the anti-theft wrench provided with the mopar 威 crossbars. Then, move the crossbar to the desired position, keeping the crossbars parallel to the rack frame. Once the crossbar i...
Page 280
Caution! (continued) • to avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads as evenly as possible and secure the load appropri- ately. • long loads which extend over the windshield, such as wood panels or su...
Page 281: Contents
Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 283 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 284 䡵 instrument cluster descriptions . . . . . . . . . . . 285 䡵 electronic vehicle information center (evic) . . 295 ▫ electronic ...
Page 282
▫ messages # . . . . . . . . . . . . . . . . . . . . . . . . . 316 ▫ turn menu off . . . . . . . . . . . . . . . . . . . . . . 317 ▫ keyless enter-n-go display — if equipped . . . . . . . . . . . . . . . . 317 ▫ compass / temperature display . . . . . . . . . 317 ▫ customer-programmable features (sy...
Page 283
▫ uconnect™ multimedia (satellite radio) — if equipped . . . . . . . . . . . . . . . . . . . . . . . . 349 ▫ operating instructions (uconnect™ phone) — if equipped . . . . . . . . . . . . . . . . . . . . . . 353 䡵 ipod 威 /usb/mp3 control — if equipped . . . . . 353 ▫ connecting the ipod 威 or externa...
Page 284
▫ replacing the batteries . . . . . . . . . . . . . . . . 374 ▫ headphones operation . . . . . . . . . . . . . . . . 374 ▫ controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 ▫ replacing the batteries . . . . . . . . . . . . . . . . 376 ▫ unwired 威 stereo headphone lifetime limited wa...
Page 285
Instrument panel features 1 — air outlet 6 — lower switch bank 11 — hood release 2 — instrument cluster 7 — hazard switch 12 — fuel door release 3 — radio 8 — storage bin 13 — headlight switch 4 — glove compartment 9 — esc button 14 — dimmer control 5 — climate controls 10 — ignition switch 4 unders...
Page 286
Instrument cluster 284 understanding your instrument panel.
Page 287
Instrument cluster descriptions 1. Tachometer indicates the engine speed in revolutions per minute (rpm x 1000). 2. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the on/run position. If the light is either not on d...
Page 288
Warning! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to...
Page 289
5. Tow/haul indicator light — if equipped this light will illuminate when the tow/ haul button has been selected. The tow/ haul button is located in the center of the instrument panel (below the climate controls). 6. Turn signal indicator the arrows will flash with the exterior turn signals when the...
Page 290
As it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/ service,...
Page 291
Please note that the tpms is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped wi...
Page 292
12. Park/headlight on indicator — if equipped this indicator will illuminate when the park lights or headlights are turned on. 13. Seat belt reminder light when the ignition switch is first turned to the on/run position, this light will turn on for four to eight seconds as a bulb check. During the b...
Page 293
The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a...
Page 294
The light also will turn on when the parking brake is applied with the ignition switch in the on/run posi- tion. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Anti-lock brake (abs) light this light monitors the anti-lock brake sy...
Page 295
18. Fuel door reminder the fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. 20. Electronic vehicle information center (evic) white telltale area t...
Page 296
25. Temperature gauge the temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or ...
Page 297
Electronic vehicle information center (evic) the electronic vehicle information center (evic) fea- tures a driver-interactive display that is located in the instrument cluster. The evic consists of the following: • fuel economy • acc: (if equipped) • vehicle speed • trip info • terrain: (if equipped...
Page 298
The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: up button press and release the up button to scroll up- ward through the main menus (fuel economy, vehicle info, tire psi, cruise, messages, units, system setup, vehicle speed, trip in...
Page 299
Back button press the back button to scroll back to a previous menu or sub-menu. Electronic vehicle information center (evic) displays the evic display consists of three sections: 1. The top line where compass direction, odometer line and outside temperature are displayed. 2. The main display area w...
Page 300
Of this message type are ⬙ turn signal on ⬙ (if a turn signal is left on) and ⬙ lights on ⬙ (if driver leaves the vehicle). • unstored messages until run these messages deal primarily with the remote start feature. This message type is displayed until the ignition is in the run state. Examples of th...
Page 301
• liftglass open • left front turn signal lamp out • right front turn signal lamp out • left rear turn signal lamp out • right rear turn signal lamp out • low tire pressure • esc system off • service blind spot system • blind spot detection unavailable • blind spot system off • blind spot system una...
Page 302
• sensed vehicle indicator — the system detects a slower moving vehicle in the same lane. Refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle” (if equipped). • driver override — if you apply the accelerator after setting the desired speed in the acc system. Refer ...
Page 303
To “adaptive cruise control (acc)” in “understand- ing the features of your vehicle” (if equipped). • cruise off when park brake is on • acc cancelled below min. Speed. • coolant low • service air suspension system • oil change due • key in ignition • lights on • key in ignition lights on • ignition...
Page 304
• memory 1 profile recall • memory 2 profile recall • press brake pedal and push button to start • wrong key • damaged key • key not programmed • function currently unavailable — power liftgate • unlock to operate — power liftgate • put in park to operate — power liftgate • automatic high beams on •...
Page 305
• raising vehicle ride height (with icon) • lowering vehicle ride height (with icon) • normal vehicle ride height — this message is dis- played (for 5 seconds) when the vehicle has achieved the normal vehicle ride height. • off road ride height level 1 — this message is displayed (for 5 seconds) whe...
Page 306
• selected ride height not permitted — the vehicle speed is too high to enter one of the preset levels (entry/exit level/off road ride height level 1/off road ride height level 2). • air suspension system cooling down – please wait — this message is displayed if the compressor tempera- ture level is...
Page 307
• electronic speed control set this light will turn on when the electronic speed control is set. For further information, refer to “electronic speed control” in “under- standing the features of your vehicle.” • adaptive cruise control (acc) on this light will turn on when the acc is on. For further ...
Page 308
Note: • even if power steering assistance is no longer opera- tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. • if the condition persists, see your a...
Page 309
Will display in the telltale display area. Tighten the fuel filler cap properly and press the select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the ...
Page 310
• oil pressure warning light this telltale indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is corrected. This...
Page 311
Required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. • engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this indicator will illuminate and...
Page 312
Warning! If the transmission temperature warning light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. Engine oil change indicator system oil change due your v...
Page 313
Vehicles not equipped with keyless enter-n-go 1. Turn the ignition switch to the on/run position (do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the off/lock position. Note: if the indicator message illuminates ...
Page 314
(mds) (if equipped) allows the engine to operate on four cylinders, or if you are driving in a fuel efficient manner. This feature allows you to monitor when you are driving in a fuel efficient manner, and it can be used to modify driving habits in order to increase fuel economy. Distance to empty (...
Page 315
Cruise control press and release the up or down button until ⬙ acc ⬙ (if equipped with adaptive cruise control) or ⬙ cruise ⬙ is highlighted in the evic. Status of the acc or cruise is displayed in the menu line also. Press and release the select (right arrow) button to display the following informa...
Page 316
Trip info press and release the up or down button until “trip info” displays highlighted in the evic and press the select button. Press and release the up/down but- tons until one of the following trip functions displays in the evic: • trip a • trip b • elapsed time press the up/down buttons to cycl...
Page 317
Down until the preferred setting is highlighted, then press and release the select button until a check-mark appears next to the setting, showing that the setting has been selected. Vehicle info (customer information features) press and release the up or down button until “vehicle info” displays in ...
Page 318
• tire pressure monitor system (shows the current pres- sure of all four road tires). For additional information, refer to “tire pressure monitor system” in “starting and operating”. Note: • tires heat up during normal driving conditions. Heat will cause the tire pressure to increase from 2 to 6 psi...
Page 319
Turn menu off select from main menu using the down button. Press- ing the select button blanks the menu display. Pressing any one of the four steering wheel buttons brings the menu back. Keyless enter-n-go display — if equipped when the engine start/stop button is pressed to change ignition switch p...
Page 320
Metallic objects) until the cal indicator displayed in the evic turns off. The compass will now function normally. Note: a good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Compass varia...
Page 321
3. Press the down button until the “compass variance” message is displayed in the evic, then press the select button. The last variance zone number displays in the evic. 4. Press and release the select button until the proper variance zone is selected, according to the map. 5. Press and release the ...
Page 322
Out of park or the vehicle begins moving, a warning message setup not available, is followed in three seconds by, vehicle not in park. Press and release the up or down button until setup displays in the evic. Use the up or down button to display one of the following choices. Select language when in ...
Page 323
Remote unlock sequence when unlock driver door only on 1st press is selected, only the driver’s door will unlock on the first press of the rke transmitter unlock button. When driver door 1st press is selected, you must press the rke transmitter unlock button twice to unlock the passenger’s doors. Wh...
Page 324
Removed showing the system has been deactivated. Refer to “driver memory seat” in “understanding the fea- tures of your vehicle.” remote start comfort sys. When this feature is selected and the remote start is activated, the heated steering wheel and driver heated seat features will automatically tu...
Page 325
With or without the sound horn on lock feature selected. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Headlamp off delay when this...
Page 326
Note: the seat will return to the memorized seat location (if recall memory with remote key unlock is set to on) when the rke transmitter is used to unlock the door. Refer to “driver memory seat” in “understanding the features of your vehicle” for further information. Tilt mirror in reverse when thi...
Page 327
Display fuel saver — if equipped the “eco” message is located in the compass/ temperature display; this message can be turned on or off. To make your selection, press and release the select button until a check-mark appears next to the setting, showing that the setting has been selected. Keyless ent...
Page 328
Been deactivated. When this feature is deactivated, the system reverts to the standard intermittent wiper operation. Hill start assist (hsa) when this feature is selected, the hsa system is active. Refer to “electronic brake control system” in “starting and operating” for system function and operati...
Page 329
Warn you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction time. To change the setting for more dynamic driving select the near setting. This warns you of a possible collision with the vehicle in front of you when you are much closer...
Page 330
Select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Calibrate compass refer to “compass display” for more information. Compass variance refer to “compass display” for more information...
Page 331
Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...
Page 332
Time button press the time button to alternate display of the time and radio frequency. Clock setting procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side tune/ scroll control knob. 3. After adjusting the hours, press the right side tune/ s...
Page 333
Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the right or left to increase or decrease the treble tones. Push the rotary tune/scroll control knob a fourth time and balance will display. Turn the tune/ scroll control knob to the r...
Page 334
Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these buttons tune the radio to the stations that you commit to pushbutton memory (12 am and 12 fm stations). Disc button pressing the disc button will allow you to switch from am/fm modes to disc modes. Op...
Page 335
Caution! • this cd player will accept 4-3/4 in (12 cm) discs only. The use of other sized discs may damage the cd player mechanism. • do not use adhesive labels. These labels can peel away and jam the player mechanism. • the res media center is a single cd player. Do not attempt to insert a second c...
Page 336
Am/fm button press the button to select either am or fm mode. Set/rnd button (random play button) press this button while the cd is playing to activate random play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right seek bu...
Page 337
A number instead. With a maximum number of files, exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • l...
Page 338
Mpeg specification sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and a...
Page 339
Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...
Page 340
Operating instructions — radio mode note: the ignition switch must be in the on/run or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume ...
Page 341
Phone button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further details. If your vehicle is not equipped with or this feature is not available on your vehicle, a ...
Page 342
Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...
Page 343
Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently broadcast music type inf...
Page 344
Program type 16-digit character display top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected music type name. The music type function only operates when in the fm mode. If a prese...
Page 345
You may add a second station to each pushbutton by repeating the above procedure with this exception: press the set/rnd button twice and set 2 will show in the display window. Each button can be set for set 1 and set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored i...
Page 346
If you insert a disc with the ignition on/run and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player wil...
Page 347
Rw/ff press and hold ff (fast forward) and the cd player will begin to fast forward until ff is released or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play button) press t...
Page 348
• maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. With a maximum number of files, exce...
Page 349
Mpeg specification sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and a...
Page 350
List button (cd mode for mp3 play) pressing the list button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the tune/scroll control knob. Selecting a folder by pressing the tune/scroll control knob will begin playing the files contained in that folde...
Page 351
Time button (auxiliary mode) press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is off). Uconnect™ multimedia (satellite radio) — if equipped satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide c...
Page 352
Using the tune/scroll control knob until sirius id is selected. Press the tune/scroll control knob and the sirius id number will display. The sirius id number display will time out in two minutes. Press any button on the radio to exit this screen. Selecting uconnect™ multimedia (satellite) mode pres...
Page 353
Seek buttons press and release the seek buttons to search for the next channel in satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without st...
Page 354
By pressing the seek button when the music type function is active, the radio will be tuned to the next channel with the same selected music type name. If a preset button is activated while in the music type (program type) mode, the music type mode will be exited and the radio will tune to the prese...
Page 355
Operating instructions (uconnect™ phone) — if equipped refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further details. Ipod 姞 /usb/mp3 control — if equipped note: this section is for sales code res and req/ rel/ret radios only with uconnect™. For sales code rbz/rhb, r...
Page 356
Connecting the ipod 姞 or external usb device use the connection cable to connect an ipod 威 or external usb device to the vehicle’s usb/aux connector port which is located in the center console or glove compart- ment. Note: the center console will have a position where the ipod 威 or consumer electron...
Page 357
Leaving the audio device connected to the ipod 威 /usb/ mp3 control system may charge it to the required level. Using this feature by using ipod cable or external usb device to connect to usb port: • the audio device can be played on the vehicle’s sound system, providing metadata (artist, track title...
Page 358
• jump backward in the current track by pressing and holding the rw button. Holding the rw button long enough will jump to the beginning of the current track. • jump forward in the current track by pressing and holding the ff >> button. • a single press backward rw or forward ff >> will jump backwar...
Page 359
Device, or press the vr button and say ⬙ shuffle on ⬙ or ⬙ shuffle off ⬙ . If the rnd icon is showing on the radio display, then the shuffle mode is on. List or browse mode during play mode, pressing any of the buttons described below, will bring up list mode. List mode enables scrolling through the...
Page 360
• preset 6 – podcasts • pressing a preset button will display the current list on the top line and the first item in that list on the second line. • to exit list mode without selecting a track, press the same preset button again to go back to play mode . • list button: the list button will display t...
Page 361
Bluetooth streaming audio (btsa) music can be streamed from your cellular phone to the uconnect™ phone system. Controlling btsa using radio buttons to get into the btsa mode, press either “aux” button on the radio or press the vr button and say “bluetooth streaming audio”. Play mode when switched to...
Page 362
Uconnect™ multimedia video entertainment system (ves)™ — if equipped getting started • screen located in the overhead console : unfold the overhead lcd screen by pushing the button on the overhead console behind the screen. • with the ignition switch in the on or acc position, turn the radio on by p...
Page 363
Or press the load button then corresponding number (1–6) where the dvd is to be loaded (non-touch-screen). 2. Insert the dvd with the label facing up. The radio automatically selects the appropriate mode after the disc is recognized and displays the menu screen or starts playing the first track. 3. ...
Page 364
2. Touch the rear ves soft-key to display the rear ves controls. If a channel list appears on the right side of the screen, touch the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 soft-key and then the disc soft-key in the media column. To exit touch the back arrow soft-...
Page 365
Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key and then the view video soft-key. • viewing a dvd on the touch-screen radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift leve...
Page 366
When connecting an external source to the aux input, be sure to follow the standard color coding for the ves™ jacks: note: certain high-end video games, such as playsta- tion3 and xbox360 will exceed the power limit of the vehicle’s power inverter. Refer to the power inverter section in your vehicle...
Page 367
3. Touch the 1 or 2 based on the headphone channel you want to change. To exit press the back arrow soft-key at the top of the screen. Rear ves soft-key select channel/screen 1 and aux 1 in the ves column 4 understanding your instrument panel 365.
Page 368
Listen to an audio source on channel 2 while a video is playing on channel 1 ensure the remote control and headphone switch is on channel 2. Using the remote control 1. Press the mode button on the remote control and the mode select screen will display, unless a video is playing then only a small ba...
Page 369
3. To listen to an audio source on channel 2 while a video is playing on channel 1, touch the 2 soft-key and choose an audio source. To exit touch the back arrow soft-key at the top left of the left screen. Rear ves soft-key select channel/screen 2 and hdd in the media column 4 understanding your in...
Page 370
Important notes for single video screen system • ves™ is able to transmit two channels of stereo audio simultaneously. • in split screen mode the left side equates to channel 1 and right side equates to channel 2. • if a video source is selected on channel 1, then channel 2 is for audio only. Select...
Page 371
Note: • channel/screen 1 select mode information is shown on the left side of the screen. • channel/screen 2 select mode information is shown on the right side of the screen. Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to di...
Page 372
3. Touch the 1 or 2 soft-key based on the channel you want to change and then the disc soft-key in the media column. To exit touch the back arrow at the top left of the screen. Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key...
Page 373
Controls and indicators 1. Power – turns the screen and wireless headphone transmitter for the selected channel on or off. To hear audio while the screen is closed, press the power button to turn the headphone transmitter on. 2. Channel selector indicators – when a button is pressed, the currently a...
Page 374
10. Prog up/down – when listening to a radio mode, pressing prog up selects the next preset and pressing prog down selects the previous preset stored in the radio. When listening to compressed audio on a data disc, prog up selects the next directory and prog down selects the previous directory. When...
Page 375
19. 䉱 / next – in radio modes, press to select to the next station. In disc modes, press to advance to the next audio track or video chapter. In menu modes, use to navigate in the menu. Remote control storage the video screen(s) come with a built in storage compart- ment for the remote control which...
Page 376
Vehicle is not equipped with a dvd player, follow the radio’s instructions to turn video lock on. The radio and the video screen(s) indicate when video lock is active. • pressing the video lock again or turning the ignition off turns video lock off and allows remote control operation of the ves™. Re...
Page 377
Controls the headphone power indicator and controls are located on the right ear cup. Note: the rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video sys...
Page 378
• when both switches are on channel 2, the remote is controlling channel 2 and the headphones are tuned to the audio of the ves™ channel 2. 2. Press the mode button on the remote control. 3. If the video screen is displaying a video source (such as a dvd video), pressing status shows the status on a...
Page 379
How long does the coverage last? This warranty lasts as long as you own the product. What does this warranty cover? Except as specified below, this warranty covers any product that in normal use is defective in workmanship or materials. What does this warranty not cover? This warranty does not cover...
Page 380
You may register your unwired 威 wireless headphones online at www.Unwiredtechnology.Com or by phone at 1-888-293-3332. System information shared modes this allows the ves™ to output radio sources to the headphones and the radio to output ves™ sources to the vehicle speakers. When the radio and ves™ ...
Page 381
Information mode display 1. Channel 1 mode 2. Channel 1 shared status 3. Channel 1 audio only/mute 4. Channel 2 mode 5. Channel 2 shared status 6. Channel 2 audio only/mute 7. Channel 1 enter button action 8. Channel 2 enter button action 9. Clock 10. Video lock 11. Not available / error 12. Disc ch...
Page 382
Numeric keypad menu when the display for either channel 1 or channel 2 shows direct tune, pressing the remote control’s enter button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Pres...
Page 383
Station list menu when listening to satellite audio, pressing the remote control’s menu button displays a list of all available channels. Navigate this list using the remote control’s navigation buttons ( 䉱 , 䉲 ) to find the desired station, press the remote control’s enter button to tune to that st...
Page 384
Display settings when watching a video source (dvd video with the disc in play mode, aux video, sirius backseat tv™, etc.), pressing the remote control’s setup button activates the display settings menu. These settings control the appear- ance of the video on the screen. The factory default settings...
Page 385
• close the video screen. • to change the current audio mode, press the remote control’s mode button. This will automatically select the next available audio mode without using the mode select menu. • when the screen is reopened, the video screen will automatically turn back on and show the appropri...
Page 386
Dvd audio support when a dvd-audio disc is inserted in the ves™ dvd player, the dvd-audio title on the disc is played by default (most dvd-audio discs also have a video title, but the video title is ignored). All multi-channel program material is automatically mixed down to two channels, which may r...
Page 387
• mixed media recordable dvd formats will only play the video_ts portion of the disc. If you are still having trouble writing a disc that is playable in the ves™ dvd player, check with the disc recording software publisher for more information about burning playable discs. The recommended method for...
Page 388
• if you are creating your own files, the recommended fixed bit rate for mp3 files is between 96 and 192kbps and the recommended fixed bit rate for wma files is between 64 and 192kbps. Variable bit rates are also supported. For both formats, the recommended sample rate is either 44.1khz or 48khz. • ...
Page 389
Display other language setup all of the language settings have a special ⬙ other ⬙ setting to accommodate languages other than japanese or eng- lish. These languages are selected using a special four- digit code. To enter a new language code, activate the dvd setup menu and follow these additional i...
Page 390
• when the entire four-digit code is entered, press the remote control’s enter button. If the language code is not valid, the numbers all change back to ⬙ * ⬙ . If the digits are visible after this step, then the language code is valid. Here is an abbreviated list of language codes. For more languag...
Page 391
To set the password, activate the dvd setup menu and follow these additional instructions: • using the remote control left and right cursor but- tons, select the rating tab. • highlight ⬙ change password ⬙ , and then press the remote control’s enter button. • enter the current password. Select a dig...
Page 392
• after the four-digit password is entered, press the remote control’s enter button to accept the change. To set the rating, activate the dvd setup menu and follow these additional instructions: • using the remote control’s left and right cursor buttons, select the rating tab. • highlight ⬙ change r...
Page 393
• using the remote control’s up and down cursor buttons, select the new rating level, and then press the remote control’s enter button to accept the change. Product agreement this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual proper...
Page 394
Steering wheel audio controls the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pr...
Page 395
The button located in the center of the left-hand control will tune to the next preset station that you have pro- grammed in the radio preset pushbutton. Cd player pressing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the beginning...
Page 396
Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. Radio operation and mobile pho...
Page 397
Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “o” (off) position. There are seven blower speeds. Temperature controls • driver temperature control rotate t...
Page 398
Mode control (air direction) push the mode control buttons to choose from several patterns of air distribution. Panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center instrument panel outlets can be aimed so that they are ...
Page 399
Note: • in floor, mix and defrost modes a small amount of air will flow through the outboard panel outlets for occupant comfort. • the air conditioning compressor operates in mix, defrost, or a blend of these modes, even if the air conditioning (a/c) button is not pressed. This dehu- midifies the ai...
Page 400
Air conditioning control press this button to engage the air conditioning. A light will illuminate when the air conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer tem- peratures...
Page 401
1. A/c button press and release to change the current air conditioning (a/c) setting, the indicator illuminates when a/c is on. Performing this function will cause the atc to switch into manual mode. 2. Recirculation control button press and release to change the current setting, the indicator illum...
Page 402
Will cause the atc to switch into manual mode. The blower will engage immediately if the defrost mode is selected. 8. Passenger temperature control up button provides the passenger with independent temperature control. Push the button for warmer temperature set- tings. 9. Passenger temperature contr...
Page 403
15. Driver temperature control down button provides the driver with independent temperature con- trol. Push the button for cooler temperature settings. 16. Driver temperature control up button provides the driver with independent temperature con- trol. Push the button for warmer temperature settings...
Page 404
Manual operation this system offers a full complement of manual override features. Note: each of these features operate independently from each other. If any one feature is controlled manually, temperature control will continue to operate automati- cally. There are seven fixed blower speeds. Use the...
Page 405
Bi-level mode air comes from the instrument panel outlets, floor outlets and defrost outlets. Note: in many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor mode air comes from the floor outlets. A slight...
Page 406
Outlets. If economy mode is desired, press the a/c button to turn off the a/c mode in the atc display and deactivate the a/c system. Note: • if the system is in mix, floor or defrost mode, the a/c can be turned off, but the a/c system shall remain active to prevent fogging of the windows. • if fog o...
Page 407
As the temperature gets colder, it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode. Regular clean...
Page 408
Operating tips chart 406 understanding your instrument panel.
Page 409: Starting And Operating
Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 413 ▫ automatic transmission . . . . . . . . . . . . . . . 413 ▫ keyless enter-n-go . . . . . . . . . . . . . . . . . . . 414 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 415 ▫ extreme cold w...
Page 410
䡵 four-wheel drive operation . . . . . . . . . . . . . 440 ▫ quadra-trac i 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 440 ▫ quadra-trac ii 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 441 ▫ shift positions . . . . . . . . . . . ...
Page 411
䡵 power steering . . . . . . . . . . . . . . . . . . . . . . . 459 ▫ 3.6l engine . . . . . . . . . . . . . . . . . . . . . . . . 459 ▫ 5.7l engine . . . . . . . . . . . . . . . . . . . . . . . . 460 ▫ power steering fluid check . . . . . . . . . . . . . 461 䡵 multi-displacement system (mds) (if equi...
Page 412
䡵 tires — general information . . . . . . . . . . . . . 487 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . 487 ▫ tire inflation pressures . . . . . . . . . . . . . . . . 488 ▫ tire pressures for high speed operation . . . 490 ▫ radial-ply tires . . . . . . . . . . . . . . . . . . . . ...
Page 413
▫ e-85 usage in non-flex fuel vehicles . . . . . . 510 ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . . 511 ▫ materials added to fuel . . . . . . . . . . . . . . . 512 ▫ fuel system cautions . . . . . . . . . . . . . . . . . 512 ▫ carbon monoxide warnings . . . . . . . . . . . . 513 䡵 flexi...
Page 414
▫ towing requirements . . . . . . . . . . . . . . . . . 531 ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . 536 䡵 snow plow . . . . . . . . . . . . . . . . . . . . . . . . . . 537 䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . 538 ▫ towing this vehicle b...
Page 415
Starting procedures before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your ve...
Page 416
Caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle speed. • do not shift from ...
Page 417
Installing and removing the engine start/stop button installing the button 1. Remove the key fob from the ignition switch. 2. Insert the engine start/stop button into the ignition switch with the lettering facing up and readable. 3. Press firmly on the center of the button to secure it into position...
Page 418
To turn off the engine using engine start/stop button 1. Place the shift lever in park, then press and release the engine start/stop button. 2. The ignition switch will return to the off position. 3. If the shift lever is not in park, the engine start/ stop button must be held for two seconds and ve...
Page 419
• press the engine start/stop button a second time to change the ignition switch to the run position (evic displays “ignition mode run”), • press the engine start/stop button a third time to return the ignition switch to the off position (evic displays “ignition mode off”). Extreme cold weather (bel...
Page 420
Clearing a flooded engine (using engine start/stop button) if the engine fails to start after you have followed the “normal starting” or “extreme cold weather ⬙ proce- dures, it may be flooded. To clear any excess fuel, press and hold the brake pedal, push the accelerator pedal all the way to the fl...
Page 421
The engine block heater cord is located: • 3.6l engine – coiled and strapped to the engine oil dipstick tube. • 5.7l engine – bundled and fastened to the injector harness. The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. Warning! Remember...
Page 422
Warning! • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. Once the key f...
Page 423
Warning! (continued) • children should be warned not to touch the park- ing brake, brake pedal or the shift lever. Do not leave the key fob in or near the vehicle, and do not leave keyless enter-n-go in the acc or on/run mode. A child could operate power windows, other controls, or move the vehicle....
Page 424
Shifting from drive to park or reverse should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has only park, reverse, neutral, and drive shift p...
Page 425
Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the ...
Page 426
Warning! (continued) • it is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone ...
Page 427
Warning! (continued) • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Chil- dren should be warned not to touch the parking brake, brake pedal or the shift lever. Do not leave the key fob in or near the ve...
Page 428
• with brake pedal released, verify that the shift lever will not move out of park. Reverse this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral use this range when the vehicle is standing for prolonged periods with engine runn...
Page 429
Drive this range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts, and the best fuel economy. The transmission automatically upshifts through underdrive first, second, and third gears, direct fourth gear and overdrive fifth gear. The drive positio...
Page 430
3. Turn the ignition switch to the lock/off position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Shift into the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. Note: even if the transmission can be reset, we recom- mend tha...
Page 431
To exit ers mode, simply press and hold the shift lever to the right (+) until “d” is once again displayed in the shift lever position indicator in the instrument cluster. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the ve...
Page 432
The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilomete...
Page 433
Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while vehicle is in motion. Apply the parking brake when leaving vehicle in this range. When parking on a level surface, you may place the shift lever in the ...
Page 434
Warning! (continued) • it is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone ...
Page 435
Warning! (continued) • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking bra...
Page 436
• with brake pedal released, verify that the shift lever will not move out of park. Reverse this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral use this range when the vehicle is standing for prolonged periods with engine runn...
Page 437
Drive this range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts, and the best fuel economy. The transmission automatically upshifts through underdrive first and sec- ond gears, direct third gear and overdrive fourth and fifth gears. The drive po...
Page 438
Downshifting the transmission to the lowest possible gear (when climbing a grade), or shifting to neutral (when stopped in heavy traffic) can help to reduce this excess heat generation. During cold temperatures, transmission operation may be modified depending on engine and transmission temperature ...
Page 439
4. Wait approximately 10 seconds. 5. Restart the engine. 6. Shift into the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. Note: even if the transmission can be reset, we recom- mend that you visit your authorized dealer at your earliest po...
Page 440
Gear as the top available gear. Once in ers mode, tapping the shift lever to the left (-) or right (+) will change the top available gear. To exit ers mode, simply press and hold the shift lever to the right (+) until “d” is once again displayed in the shift lever position indicator in the instrumen...
Page 441
When to use tow/haul mode when driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the tow/haul switch to select tow/ haul mode. This will improve performance and reduce the potential for transmission overheating or failure due to...
Page 442
Torque converter clutch a feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automati- cally at calibrated speeds. This may result in a slightly different feeling or response during normal operation i...
Page 443
Abs and traction control, provides resistance to any wheel that is slipping to allow additional torque transfer to wheels with traction. Note: the quadra-trac i 威 system is not appropriate for conditions where 4wd low range is recommended. Refer to “off-road driving tips” in “starting and oper- atin...
Page 444
Warning! You or others could be injured if you leave the vehicle unattended with the transfer case in the n (neutral) position without first fully engaging the parking brake. The transfer case n (neutral) position disengages both the front and rear driveshafts from the powertrain and will allow the ...
Page 445
Shifting procedures 4wd hi to 4wd low with the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the on position or the engine running, shift the transmission into neutral, and press the “4wd low” button once on the transfer case switch. The “4wd low” indicator light in the instr...
Page 446
4wd low to 4wd hi with the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the on position or the engine running, shift the transmission into neutral, and press the “4wd low” button once on the transfer case switch. The “4wd low” indicator light in the instrument cluster will f...
Page 447
5. Repeat steps 1 to 4 to shift out of neutral. Note: if shift conditions/interlocks are not met, a “to tow vehicle safely, read neutral shift procedure in owners manual” message will flash from the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)”...
Page 448
Selec-terrain™ — if equipped description selec-terrain™ combines the capabilities of the vehicle control systems, along with driver input, to provide the best performance for all terrains. Selec-terrain™ consists of the following positions: • sport – dry weather, on-road calibration. Only avail- abl...
Page 449
With air suspension, the level will change to normal ride height (nrh) if the transfer case is in high range. The level will change to off-road 1 if the transfer case is in low range. • auto – fully automatic full time four-wheel drive operation can be used on and off road. Balances traction with se...
Page 450
Electronic vehicle information center (evic) display messages when the appropriate conditions exist, a message will appear in the evic display. Refer to “electronic vehicle information center (evic)” in “understanding your instrument panel” for further information. Quadra-lift™ — if equipped descrip...
Page 451
• normal ride height (nrh) – this is the standard position of the suspension and is meant for normal driving. • off-road 1 (or1) (raises the vehicle approximately 1.3 in (33 mm) – this position should be the default position for all off-road driving until or2 is needed. A smoother and more comfortab...
Page 452
Selec-terrain™ knob is turned to the “sport” posi- tion. Turning the selec-terrain™ knob to the “auto” position will return the system to normal operation. • park mode (lowers the vehicle approximately 1.5 in (38 mm) – this position lowers the vehicle for easier passenger entry and exit as well as l...
Page 453
After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. To assist with changing a spare tire, the quadra-lift™ air suspension system has a feature which allo...
Page 454
Operation the indicator lamps 3 through 6 will illuminate to show the current position of the vehicle. Flashing indicator lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the “up” button, the highest flashing indica- tor lam...
Page 455
• normal ride height (nrh) – indicator lamp 4 will be illuminated when the vehicle is in this position. • park mode – indicator lamp 3 will be illuminated when the vehicle is in park mode. If park mode is requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp ...
Page 456
Off-road driving tips note: prior to off-road driving, remove the front air dam to prevent damage. The front air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand. Quadra-lift™ – if equipped when off-roading, it is recommended that the lowest usea...
Page 457
Caution! Do not use 4wd low range when operating the vehicle on dry pavement. Driveline hardware dam- age can result. Driving through water although your vehicle is capable of driving through water, there are a number of precautions that must be considered before entering the water. Note: your vehic...
Page 458
And/or the flow rate is reduced. If you must cross flowing water avoid depths in excess of 9 inches (23 cm). The flowing water can erode the streambed, causing your vehicle to sink into deeper water. Determine exit point(s) that are downstream of your entry point to allow for drifting. Standing wate...
Page 459
If you stall or begin to lose forward motion while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brakes. Restart the engine, and shift into reverse. Back slowly down the hill, allowing the compression braking of the engine to help regulate your speed. If the b...
Page 460
After driving off-road off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can get any problems taken care of right away and have your vehicle ready when you need it. • completely inspect...
Page 461
• if you experience unusual vibration after driving in mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a wheel imbalance and freeing the wheels of it will correct the situation. Power steering 3.6l engine your vehicle is equipped with an electro-...
Page 462
Occurred, which caused an over temperature condition in the power steering system. You will lose power steering assistance momentarily until the over temperature con- dition no longer exists. Once driving conditions are safe, then pull over and let vehicle idle for a few moments until the light turn...
Page 463
System. This noise should be considered normal, and it does not in any way damage the steering system. Warning! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Caution! Prolonged operation of the ...
Page 464
If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Multi-displacement system (mds) (if equipped) — 5.7l engine only thi...
Page 465
When the parking brake is applied with the ignition switch in the on position, the “brake warning light” in the instrument cluster will illuminate. Note: • when the parking brake is applied and the transmis- sion is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, ...
Page 466
Warning! (continued) • be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision. • always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury. Also be certain to leave the transmission in...
Page 467
Warning! The abs cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The abs cannot prevent collisions, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydropl...
Page 468
Benefit of the system, you must apply continuous brak- ing pressure during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the bas is deactivated. Warning! The bas cannot prevent the natural l...
Page 469
Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. Erm cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. The capabilit...
Page 470
Light” also flashes when the tcs is active. If the “esc activation/malfunction indicator light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! The electronic...
Page 471
Partial off this mode is entered by momentarily pressing the “esc off” switch. When in “partial off” mode, the tcs portion of esc, except for the bld feature described in the tcs section, has been disabled and the “esc off indicator light” will be illuminated. All other stability features of esc fun...
Page 472
Off” mode is overcome, turn esc back on by momen- tarily pressing the “esc off” switch. This may be done while the vehicle is in motion. 4wd low range partial off this is the normal operating mode for esc in 4wd low range. Whenever the vehicle is started in 4wd low range, or the transfer case (if eq...
Page 473
Hill start assist (hsa) the hsa system is designed to assist the driver when starting a vehicle from a stop on a hill. Hsa will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of the brake pedal. If the driver does not apply th...
Page 474
Towing with hsa hsa will provide assistance when starting on a grade when pulling a trailer. Warning! • if you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enoug...
Page 475
Ready alert braking – if equipped ready alert braking may reduce the time required to reach full braking during emergency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is released by the driver. When the throttle is released very...
Page 476
Hill descent control (hdc) — four-wheel drive models with mp3023 two-speed transfer case only hdc maintains vehicle speed while descending hills during off-road driving situations and is available in 4wd low range only. To enable hdc, press the hdc switch or put the selec-terrain™ system in “rock” m...
Page 477
The hdc speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected. Hdc operation can be overridden with brake application to slow the vehicle down below the hdc control speed. Conversely, if more speed is desired during hdc control,...
Page 478
Warning! Hdc is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed. Esc activation/malfunction indicator light and esc off indicator light the “esc...
Page 479
Note: • the “esc activation/malfunction indicator light” and the “esc off indicator light” come on momen- tarily each time the ignition switch is turned on. • each time the ignition is turned on, the esc system will be on even if it was turned off previously. • the esc system will make buzzing or cl...
Page 480
Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...
Page 481
Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ ....Blank.... ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t or s = temporary spare tire 31 = overall diameter in inches (in) 21...
Page 482
Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...
Page 483
Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...
Page 484
Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...
Page 485
Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire and loading information placard this placard tells you important information about the: ...
Page 486
Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the tire and loading informati...
Page 487
3. Subtract the combined weight of the driver and pas- sengers from xxx lbs or xxx kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “xxx” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the ...
Page 488
486 starting and operating.
Page 489
Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...
Page 490
Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...
Page 491
Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure...
Page 492
Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...
Page 493
Vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equip- ment tire and wheel as a spare, a non-matching tempo- rary emergency use spare may be equipped with your vehicle. Temporary u...
Page 494
Warning! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnin...
Page 495
Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your tire and loading info...
Page 496
Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...
Page 497
Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Replacement tires the tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold ...
Page 498
Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...
Page 499
• due to limited clearance, use sae class “s” low profile cables or traction devices only. Security chain com- pany (scc) super z6 #sz 441 cables or equivalent are recommended. Warning! Using tires of different size and type (m+s, snow) between front and rear axles can cause unpredictable handling. ...
Page 500
Caution! (continued) • observe the traction device manufacturer’s in- structions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer’s if it is less than 30 mph (48 km/h). • do not use traction devices on a com...
Page 501
These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on on/off-road type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, qu...
Page 502
The outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour pe...
Page 503
Light will still be on. In this situation, the tire pressure monitoring telltale light will turn off only after the tires have been inflated to the vehicle’s recommended cold tire pressure value. Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures have ...
Page 504
• the tpms is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the tire pressure monitoring telltale light. • seasonal tem...
Page 505
Will automatically update and the tire pressure monitor- ing telltale light will extinguish, once the updated tire pressures have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. The tire pressure monitoring telltale light will...
Page 506
For 75 seconds and then remain on solid. In addition, a “service tpm system” message will be displayed for a minimum of five seconds. For each subsequent ignition switch cycle, a chime will sound, a “service tpm system” message will be displayed for a minimum of five seconds, and the tire pressure m...
Page 507
• tire pressure monitoring telltale light tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the ...
Page 508
Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is “flashing” on the graphic display to the vehicle’s recommended cold tire pressure. The system will automatically update, the graphic dis- play of the pre...
Page 509
Message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. 2. Installing some form of aftermarket w...
Page 510
Place of the pressure value. For each subsequent ignition switch cycle, a chime will sound, the tire pressure monitoring telltale light will flash on and off for 75 sec- onds and then remain on solid, and the evic will display a ⬙ service tpm system ⬙ message for five seconds and then display dashes...
Page 511
Fuel requirements 3.6l engine this engine is designed to meet all emis- sions regulations and provide excellent fuel economy and performance when us- ing high-quality unleaded “regular” gaso- line having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide a...
Page 512
Reformulated gasoline many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline.” reformulated gasoline contains oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality. The manufacturer supports the use of ref...
Page 513
If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • obd ii “malfunction indicator light” on • poor engine performance • poor cold start and cold driveability • increased risk for fuel system component corrosion t...
Page 514
Materials added to fuel all gasoline sold in the united states is required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the f...
Page 515
Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...
Page 516
The other sections of this manual for information on features that are common between flexible fuel and gasoline-only powered vehicles. Caution! Only vehicles with the e-85 fuel filler door label can operate on e-85. E-85 fuel cap e-85 badge 514 starting and operating.
Page 517
Ethanol fuel (e-85) e-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Warning! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap)...
Page 518
• some additives used in regular gasoline are not fully compatible with e-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as mopar 威 injector cleanup or techron may be used. Selection of engine oil...
Page 519
Cruising range because e-85 fuel contains less energy per gallon/liter than gasoline, you will experience an increase in fuel consumption. You can expect your miles per gallon (mpg)/miles per liter and your driving range to decrease by about 30%, compared to gasoline operation. Replacement parts man...
Page 520
1. Press the fuel filler door release switch (located under the headlamp switch). 2. Open the fuel filler door, and remove the fuel filler cap. Fuel filler door release switch fuel filler cap 518 starting and operating.
Page 521
Caution! • damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “malfunction indi- cator light (mil)” to illuminate, due to f...
Page 522
• tighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • if the gas cap is not tighten properly, the mil will come on. Be sure the gas cap is tightened every time the vehicle is refueled. Emergency fuel filler door release if ...
Page 523
In “understanding your instrument panel” for further information. Tighten the fuel filler cap properly and press the select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. Vehicle loading certification label as required by natio...
Page 524
Each axle’s gawr is determined by the components in the system with the lowest load carrying capacity (axle, springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for in- creased durability, does not necessarily increase the ve- hicle’s gvwr. Tire size...
Page 525
The front or rear axles has been exceeded, but the total load is within the specified gvwr. If so, weight must be shifted from front to rear, or rear to front, as appropriate until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed e...
Page 526
Gross trailer weight (gtw) the gtw is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition. The recommended way to measure gtw is to put your fully loaded trailer o...
Page 527
Trailer tongue weight (tw) the tw is the downward force exerted on the hitch ball by the trailer. In most cases it should not be less than 10% or more than 15% of the trailer load. You must consider this as part of the load on your vehicle. Frontal area the frontal area is the maximum height multipl...
Page 528
Trailer stability. A friction/hydraulic sway control mecha- nism and a weight distributing (load equalizing) hitch are recommended for heavier trailer tongue weights (tw) and may be required depending on vehicle and trailer configuration/loading to comply with gross axle weight rating (gawr) require...
Page 529
With weight-distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 5 starting and operating 527.
Page 530
Trailer hitch classification your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional trailer tow prep package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weig...
Page 531
Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ model model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l 4x2 10,400...
Page 532
Trailer and tongue weight always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the gross trailer weight (gtw) on the tow hitch of your vehicle. Loads balanced over the wheels, or heavier in the rear, can cause the trailer to sway severely side-to...
Page 533
Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “tire safety information/tire and loading information...
Page 534
Warning! (continued) • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. You could lose control of your vehicle and have a collision. •...
Page 535
Towing requirements – tires − do not attempt to tow a trailer while using a compact spare tire. − proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “tires – general information” in “starting and oper- ating” for proper tire inflation proce...
Page 536
Caution! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Warning! • do not connect trailer brake...
Page 537
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground...
Page 538
Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic transmission the drive range can be selected when towing. How- ever, if frequent shifting occurs while in this range, the tow/haul mode (if equipped), or a lower...
Page 539
Cooling system to reduce potential for engine and transmission over- heating, take the following actions: − city driving when stopped for short periods of time, shift the trans- mission into neutral and increase engine idle speed. − highway driving reduce speed. − air conditioning turn off temporari...
Page 540
Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheel off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • transmission in park • transfer case in neutral (n) • tow in forward direction dol...
Page 541
Recreational towing – two-wheel drive models do not flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for two-wheel drive models) is allowed only if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly...
Page 542
Caution! Towing this vehicle in violation of the above require- ments can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. Recreational towing – quadra–trac ii 姞 /quadra–drive 姞 ii four-wheel drive models the tr...
Page 543
Caution! (continued) • failure to follow these procedures can cause se- vere transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. • do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damage...
Page 544
Caution! It is necessary to follow these steps to be certain that the transfer case is fully in neutral (n) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift the transmission to park. 2. Turn off the engine. 3. For vehicles with keyless...
Page 545
8. After the shift is completed and the neutral (n) light stays on, release the neutral (n) button. 9. Start the engine. 10. Shift the transmission into reverse. 11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Turn off the engine. 13. Firmly apply the p...
Page 546
Note: • steps 1 through 6 are requirements that must be met prior to pressing the neutral (n) button, and must continue to be met until the four seconds elapse and the shift has been completed. If any of these require- ments are not met prior to pressing the neutral (n) button or are no longer met d...
Page 547
Note: when shifting out of transfer case neutral (n), turning the engine off may be required to avoid gear clash. 7. After the neutral (n) indicator light turns off, release the neutral (n) button. 8. After the neutral (n) button has been released, the transfer case will shift to the position indica...
Page 548
Note: • steps 1 through 5 are requirements that must be met prior to pressing the neutral (n) button, and must continue to be met until the shift has been completed. If any of these requirements are not met prior to pressing the neutral (n) button or are no longer met during the shift, the neutral (...
Page 549: Contents
What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . 548 䡵 if your engine overheats . . . . . . . . . . . . . . . . 548 䡵 jacking and tire changing . . . . . . . . . . . . . . . 549 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . 550 ▫ spare tire...
Page 550
Hazard warning flashers the hazard warning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. ...
Page 551
Caution! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads hot (h), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on hot (h), and you hear conti...
Page 552
Warning! (continued) • the jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack location the scissor-type jack and tire changin...
Page 553
Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. Warning! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2. Turn...
Page 554
Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...
Page 555
Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the whee...
Page 556
Caution! Do not attempt to raise vehicle by jacking on loca- tions other than those indicated in the jacking in- structions for this vehicle. 4. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do n...
Page 557
5. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indi- cated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Front jacking location lift point symbol on sill...
Page 558
6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. Warning! Raising the vehicle higher than necessary can make the vehicle le...
Page 559
Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 9. Lower the vehicle by turning the jack screw counter- clockwise, and remove the jack and wheel block...
Page 560
12. Remove the small center cap and securely store the road wheel in the cargo area. 13. Have the aluminum road wheel and tire repaired as soon as possible, properly secure the spare tire with the special wing nut torqued to 3.7 ft-lbs (5 n·m), reinstall the jack and tool kit foam tray, and latch th...
Page 561
Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Finish tightening t...
Page 562
Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...
Page 563
Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...
Page 564
Caution! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) j...
Page 565
9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. 10. Reinstall the protective cover over the remote posi- tive (+) battery post of the discharged vehicle. If frequent jump-starting is required to start your vehicle you should have th...
Page 566
Caution! • when “rocking” a stuck vehicle by moving be- tween drive and reverse, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. ...
Page 567
Warning! • chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. • stand clear of vehicles when pulling with tow hooks. Tow straps may become disengaged, caus- ing serious injury. Caution! Tow hooks are for emergency use only, to rescue a vehicle ...
Page 568
4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6. Using the screwdriver or similar tool, press and hold the shift lock lever down. 7. Move the shift lever ...
Page 569
Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance see instructions in “recreational tow- ing” under “starting and operating” • transmission in park • transfer ...
Page 570
If the vehicle’s battery is discharged, refer to “shift lever override” in “what to do in emergencies” for instruc- tions on shifting the automatic transmission out of the park position for towing. Caution! Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat b...
Page 571
If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), tow with the rear wheels off the ground. Acceptable methods are to tow the vehicle on a flatbed, or with the front wheels raised and the rear wheels on a towing dolly, or ...
Page 573: Maintaining Your Vehicle
Maintaining your vehicle contents 䡵 engine compartment — 3.6l . . . . . . . . . . . . . 573 䡵 engine compartment — 5.7l . . . . . . . . . . . . . 574 䡵 onboard diagnostic system – obd ii . . . . . . . 575 ▫ loose fuel filler cap message . . . . . . . . . . . 575 䡵 emissions inspection and maintenanc...
Page 574
▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 597 ▫ front/rear axle fluid . . . . . . . . . . . . . . . . . 599 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . 600 ▫ automatic transmission . . . . . . . . . . . . . . . 601 ▫ appearance care and protection from corrosion ...
Page 575
Engine compartment — 3.6l 1 — totally integrated power module (fuses) 6 — air cleaner filter 2 — engine oil dipstick 7 — washer fluid reservoir 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — power steering fluid reservoir 7 maintain...
Page 576
Engine compartment — 5.7l 1 — totally integrated power module (fuses) 6 — washer fluid reservoir 2 — automatic transmission dipstick 7 — engine oil dipstick 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — air cleaner filter 574 maint...
Page 577
Onboard diagnostic system – obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...
Page 578
The select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Emissions inspection and maintenance programs in some l...
Page 579
4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...
Page 580
Dealer service your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting...
Page 581
Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...
Page 582
Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “maintenance schedule” for further information. Note: under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichev...
Page 583
Engine oil viscosity – 3.6l engine sae 5w-30 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil...
Page 584
Materials added to engine oils do not add any supplemental materials, other than leak detection dyes, to your engine oil. Engine oil is an engineered product and its performance may be im- paired by supplemental additives. Disposing of used engine oil and oil filters care should be taken in disposin...
Page 585
Warning! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compa...
Page 586
Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...
Page 587
Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt condition should also be checked at t...
Page 588
Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency (epa) and is an ozone-saving product. However, the manufacturer recommends that air condi- tioning service be performed by authorized dealers ...
Page 589
Avoid using the wiper blades to wipe frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Note: life expectancy of wiper blades varies depend- ing on geographical area and frequency of use. Poor performance of blades may be...
Page 590
3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade an...
Page 591
Clean the wiper blades, this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Co...
Page 592
Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...
Page 593
Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...
Page 594
Cooling system warning! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiat...
Page 595
Cooling system – drain, flush, and refill if the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant ...
Page 596
Adding coolant your vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals. This engine coolant (antifreeze) can be used up to 5 years or 104,000 miles (169 000 km) before replace- ment. To prevent reducing this extended maintenance period, it ...
Page 597
Cooling system pressure cap the cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank. The cap should be inspected and cleaned if there is any accumulation of foreign mater...
Page 598
Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals and children, do not store ethylene glyco...
Page 599
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant recovery bottle. • check engine coolant (antifreeze) freeze point in the radiator and in the coolant recovery bottl...
Page 600
Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...
Page 601
Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...
Page 602
The front axle fill and drain plugs should be tightened to 22 to 29 ft lbs (30 to 40 n·m). Caution! Do not over tighten the plugs as it could damage them and cause them to leak. Rear axle fluid level check the rear axle oil level needs to be between 1/8 in (3 mm) below the bottom of the fill hole an...
Page 603
Adding fluid add fluid at the filler hole, until it runs out of the hole, when the vehicle is in a level position. Drain first remove fill plug, then remove drain plug. Recom- mended tightening torque for drain and fill plugs is 15 to 25 ft lbs (20 to 34 n·m). Caution! When installing plugs, do not ...
Page 604
Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes....
Page 605
Caution! • using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter chan...
Page 606
6. Remove the dipstick again, and note the fluid level on both sides. The fluid level should be between the “hot” (upper) reference holes on the dipstick at normal operat- ing temperature. The fluid level is only valid if there is a solid coating of oil on both sides of the dipstick. If the fluid is...
Page 607
Passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What cau...
Page 608
Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty...
Page 609
Wheel and wheel trim care • all wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • to remove heavy soil and/or excessive brake dust, use mopar 威 wheel cleaner or equivalent or select a non-abrasive, non-...
Page 610
Interior care use mopar 威 total clean or equivalent to clean fabric upholstery and carpeting. Interior trim should be cleaned starting with a damp cloth, a damp cloth with mopar 威 total clean or equiva- lent, then mopar 威 spot & stain remover or equivalent, if absolutely necessary. Do not use harsh ...
Page 611
To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Gl...
Page 612
Replace the belts if they appear frayed or worn or if the buckles do not work properly. Fuses totally integrated power module the totally integrated power module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and compo- nent may ...
Page 613
Cavity cartridge fuse mini fuse description j03 30 amp pink trailer tow j04 25 amp natural driver door node j05 25 amp natural passenger door node j06 40 amp green antilock brakes pump/stability control system j07 30 amp pink antilock brakes valve/stability control system j08 40 amp green power seat...
Page 614
Cavity cartridge fuse mini fuse description j18 20 amp blue powertrain control module/powertrain control module transmission range j19 60 amp yellow radiator fan motor hi/radiator fan motor low j20 30 amp pink front wiper j21 20 amp blue front/rear washer control j22 25 amp natural sunroof module m1...
Page 615
Cavity cartridge fuse mini fuse description m10 15 amp blue video/universal garage door opener m11 10 amp red heating, ventilation & air conditioning (climate control system) m12 30 amp green radio/amplifier m13 20 amp yellow instrument cluster m14 20 amp yellow back up camera – if equipped cavity c...
Page 616
Cavity cartridge fuse mini fuse description m21 20 amp yellow automatic shutdown 3 m22 10 amp red horns (low/high) – right m23 10 amp red horns (low/high) – left m24 25 amp natural rear wiper m25 20 amp yellow fuel pump motor output/diesel lift pump (export only) m26 10 amp red driver door switch ba...
Page 617
Cavity cartridge fuse mini fuse description m33 10 amp red powertrain controller/ transmission con- troller m34 10 amp red park assist module/climate control system module/infra red sensor/compass module m35 15 amp blue left rear parklamps m36 20 amp yellow power outlet cavity cartridge fuse mini fu...
Page 618
Caution! (continued) • when replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system over- load. If a properly rated fuse continues to blow, it indicates a problem i...
Page 619
Exterior lights bulb type headlamps (low beam) . . . . . . . . . . . . . . . . . . . H11 headlamps (high beam) . . . . . . . . . . . . . . . . . . 9005 headlamps (low beam) – high intensity discharge (hid) . . . D1s (serviced at authorized dealer) front park/turn lamp . . . . . . . . . . . . . . . ....
Page 620
Note: on vehicles equipped with high intensity dis- charge (hid) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- ishes and becomes more white after approximately 10 seconds, as the system charges. Halogen headlamps – if equipped 1. Open the hood. 2. Turn th...
Page 621
Front fog lamps 1. Reach through the cutout in the splash shield and disconnect the wiring harness from the fog lamp connec- tor. 2. Firmly grasp the bulb by the two latches and squeeze them together to unlock the bulb from the back of the front fog lamp housing. 3. Pull the bulb straight out from t...
Page 622
Rear tail, stop, turn signal, and backup lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 3. Grasp the tail lamp and pull firmly rearward to disengage the lamp from the aperture panel. 4. Twist socket counter clockwise and remove from lamp. 5. Pull the bulb to rem...
Page 623
10. Tail lamps are now visible. Rotate socket(s) counter clockwise. 11. Remove/replace bulb(s). 12. Reinstall the socket(s) 13. Reverse process to reinstall the liftgate trim. Center high-mounted stop lamp (chmsl) the center high-mounted stop lamp is an led assembly. See your authorized dealer for r...
Page 624
Rear license lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4. Reinstall lens. Fluid capacities u.S. Metric fuel (approximate) all engines 24.6 gallons 93 liters engine oil with filter 3.6l engine ...
Page 625
Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hybrid organic additive technology) or equivalent. Engine oil – 3.6l engine use api certified sae 5w-30 engine oil, meeting the require...
Page 626
Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4 威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case – 3.6l engine shell automatic transmission fluid 3353 or equivalent. Transfer case – 5.7l engine mopar 威 atf+4 威 automatic tra...
Page 627
Component fluid, lubricant, or genuine part power steering reservoir – 3.6l engine mopar 威 hydraulic fluid or equivalent meeting ms-11655, such as fuchs eg zh 3044 or pentosin chf 11s. Power steering reservoir – 5.7l engine mopar 威 power steering fluid +4, mopar 威 atf+4 威 automatic transmission flui...
Page 629: Maintenance Schedules
Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 628 ▫ required maintenance intervals . . . . . . . . . . 630 8 m a i n t e n a n c e s c h e d u l e s.
Page 630
Maintenance schedule the scheduled maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating condition...
Page 631
Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle off...
Page 632
Once a month • check tire pressure and look for unusual wear or damage. • check the fluid levels of the coolant reservoir, brake master cylinder, power steering and transmission (5.7l only) and add as needed. • check all lights and other electrical items for correct operation. At each oil change • c...
Page 633
8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer reading date repair order # dealer code signature, authorized ser...
Page 634
24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the front ...
Page 635
40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer reading date repair order # dealer code signature, authorized ...
Page 636
56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer reading date repair order # dealer code signature, authorized ...
Page 637
64,000 miles (104,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...
Page 638
72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fron...
Page 639
88,000 miles (143,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer reading date repair order # dealer code signature, authorize...
Page 640
96,000 miles (156,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...
Page 641
104,000 miles (169,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ flush and replace the engine coolant at 104,000 miles (169 000 km...
Page 642
120,000 miles (195,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fr...
Page 643
128,000 miles (208,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditio...
Page 644
144,000 miles (234,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ if using your vehicle for any of the following: dusty or off-roa...
Page 645
Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • failure to properly inspect and mai...
Page 647: Contents
If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647 ▫ prepare for the appointment . . . . . . . . . . . 647 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 647 ▫ be reasonable with r...
Page 648
䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 653 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 653 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 653 ▫ temperature grades . . . . . . . . . . . . . . . . . . 65...
Page 649
Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...
Page 650
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...
Page 651
Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...
Page 652
We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...
Page 653
If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...
Page 654
• service manuals these comprehensive service manuals provide the information that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing chrysler group llc vehicles. A complete working knowledge of the vehicle, system, and/or...
Page 655
Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....
Page 656
Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...
Page 657: Index
Index 10
Page 658
Adaptive cruise control (acc) (cruise control) . . 201 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 517 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . 512 air cleaner, engine (engine air cleaner filter) . . . 582 air conditioner maintenance . . . . . . . . . ....
Page 659
Fluid level check . . . . . . . . . . . . . . . . . 602,603 fluid type . . . . . . . . . . . . . . . . . . . . . . . . . 601 special additives . . . . . . . . . . . . . . . . . . . . . 602 autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . 428,437 auxiliary electrical outlet (power outl...
Page 660
Cargo area features . . . . . . . . . . . . . . . . . . . . . . 268 cargo compartment . . . . . . . . . . . . . . . . . . . . . . 268 light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 cargo tie-downs . . . . . ...
Page 661
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . 592 adding coolant (antifreeze) . . . . . . . . . . . . . 594 coolant capacity . . . . . . . . . . . . . . . . . . . . . 622 coolant level . . . . . . . . . . . . . . . . . . . . . . . 596 disposal of used coolant . . . . . . . . . . ....
Page 662
E-85 fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513 electric remote mirrors . . . . . . . . . . . . . . . . . . . 110 electrical outlet, auxiliary (power outlet) . . . . . . 258 electronic brake control system . . . . . . . . . . . . . 464 anti-lock brake system . . . . . . . . ....
Page 663
Oil selection . . . . . . . . . . . . . . . . . . . . . 580,622 oil synthetic . . . . . . . . . . . . . . . . . . . . . . . . 581 overheating . . . . . . . . . . . . . . . . . . . . . . . . 548 starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 temperature gauge . . . . . . . . . . ....
Page 664
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . 579 power steering . . . . . . . . . . . . . . . . . . . . . . 461 fluids, lubricants and genuine parts . . . . . . . . . . 623 fog light service . . . . . . . . . . . . . . . . . . . . . . . . 619 fog lights . . . . . . . . . . . . . . . ...
Page 665
Gasoline, clean air . . . . . . . . . . . . . . . . . . . . . . 510 gasoline, reformulated . . . . . . . . . . . . . . . . . . . 510 gauges coolant temperature . . . . . . . . . . . . . . . . . . 294 fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 speedometer . . . . . . . . . ....
Page 666
Illuminated entry . . . . . . . . . . . . . . . . . . . . . . . . 23 immobilizer (sentry key) . . . . . . . . . . . . . . . . . . . 18 infant restraint . . . . . . . . . . . . . . . . . . . . . . . . 81,82 inflation pressure tires . . . . . . . . . . . . . . . . . . . . 488 information center, vehic...
Page 667
Light bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98,180 airbag . . . . . . . . . . . . . . . . . . . . . . 74,79,96,285 anti-lock . . . . . . . . . . . . . . . . . . . . . . . . . . 292 automatic headlights . ...
Page 668
Traction control . . . . . . . . . . . . . . . . . . . . . 476 turn signal . . . . . . . . . . . . . . . . . 98,180,618,620 vanity mirror . . . . . . . . . . . . . . . . . . . . . . . 111 loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 521 tires . . . . . . . . . . . . . . . . . . ...
Page 669
Mtbe/etbe . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 multi-displacement engine system . . . . . . . . . . . 462 multi-function control lever . . . . . . . . . . . . . . . 180 new vehicle break-in period . . . . . . . . . . . . . . . . 93 occupant restraints . . . . . . . . . . . . . ....
Page 670
Panic alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 park sense system, rear . . . . . . . . . . . . . . . . . . . 229 parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . 462 personal settings . . . . . . . . . . . . . . . . . . . . . . . . 319 pets . . . . . . . . . ...
Page 671
Rear cupholder . . . . . . . . . . . . . . . . . . . . . . . . . 264 rear park sense system . . . . . . . . . . . . . . . . . . . 229 rear seat, folding . . . . . . . . . . . . . . . . . . . . . . . 171 rear window defroster . . . . . . . . . . . . . . . . . . . 275 rear window features . . . . . . ...
Page 672
Schedule, maintenance . . . . . . . . . . . . . . . . . . . . 628 seat belt reminder . . . . . . . . . . . . . . . . . . . . . . . 65 seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52,96 adjustable upper shoulder anchorage . . . . . . 58 and pregnant women . . . . . . . . . . . ....
Page 673
Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 automatic transmission . . . . . . . . . . . . . . . . 419 short message service (sms) . . . . . . . . . . . . . . . . 143 shoulder belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 side airbag . . . . . . . . . ...
Page 674
Supplemental restraint system - airbag . . . . . . . . 66 suspension, air . . . . . . . . . . . . . . . . . . . . . . . . . 448 sway control, trailer . . . . . . . . . . . . . . . . . . . . . 470 synthetic engine oil . . . . . . . . . . . . . . . . . . . . . . 581 system, remote starting . . . . . ....
Page 675
Snow tires . . . . . . . . . . . . . . . . . . . . . . . . . 498 spare tire . . . . . . . . . . . . . . . . . . . . . . . . . . 550 spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . 493 tread wear indicators . . . . . . . . . . . . . . . . . 494 tongue weight/trailer weight . . . . . . ...
Page 676
Uci connector . . . . . . . . . . . . . . . . . . . . . . . . . 353 uconnect™ (hands-free phone) . . . . . . . . . . . . . 121 uniform tire quality grades . . . . . . . . . . . . . . . . 653 universal consumer interface (uci) connector . . . 353 universal transmitter . . . . . . . . . . . . . . . . ...
Page 677
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 windshield defroster . . . . . . . . . . . . . . . . . . . 96,396 windshield washers . . . . . . . . . . . . . . . . . . . . . . 189 fluid . . . . . . . . . . . ....
Page 678
Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed prop- erly by trained personnel. The following must be obs...
Page 679
Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 20 12 gr and cher ok ee 12wk741-126-af sixth edition printed in u.S.A. 2 0 1 2.