1. DL manuals
  2. Jeep
  3. Scooter
  4. Grand Cherokee
  5. Owner's Manual

Jeep Grand Cherokee Owner's Manual

Manual is about: 2015

Summary of Grand Cherokee

  • Page 1

    Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 2 0 12 g ra n d c h e ro k e e 12wk741-126-aa first edition printed in u.S.A. 2 0 1 2 907713 jeep cherokee om cover.Indd 1 3/10/11 1:09 pm.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the featu...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 5 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 6 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 8 䡵 vehicle ide...

  • Page 6

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks t...

  • Page 7

    Note: after reviewing the owner information, it should be stored in the vehicle for convenient referenc- ing and remain with the vehicle when sold. When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- nicians and genuine mopar 威 parts, and...

  • Page 8

    Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million a...

  • Page 9

    1 introduction 7.

  • Page 10

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 11

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death. Right front body vin location 1 introducti...

  • Page 13: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 14 ▫ wireless ignition node (win) . . . . . . . . . . . . 14 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ▫ removing key fob from ignition . . . . . . . . . . 16 ▫ ...

  • Page 14

    ▫ using the panic alarm . . . . . . . . . . . . . . . . . 26 ▫ programming additional transmitters . . . . . . 26 ▫ transmitter battery replacement . . . . . . . . . . 26 ▫ general information . . . . . . . . . . . . . . . . . . . 29 䡵 remote starting system — if equipped . . . . . . . 29 ▫ how to u...

  • Page 15

    ▫ seat belt pretensioners . . . . . . . . . . . . . . . . . 62 ▫ supplemental active head restraints (ahr) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 ▫ enhanced seat belt use reminder system (beltalert 威 ) . . . . . . . . . . . . . . . . . . . . . . . . . 66 ▫ seat belt lock out . ...

  • Page 16

    A word about your keys your vehicle uses a keyless ignition system. This system consists of a key fob with remote keyless entry (rke) transmitter and a wireless ignition node (win) with integral ignition switch. You can insert the key fob into the ignition switch with either side up. Keyless enter-n...

  • Page 17

    Key fob the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores in the rear of the key ...

  • Page 18

    To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand. Note: you can insert the double-sided emergency key into the lock cylinders with either side up. Removing key fob from ignition place the shift l...

  • Page 19

    • the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the off position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “electronic vehi...

  • Page 20

    Warning! (continued) • do not leave the key fob in or near the vehicle, and do not leave keyless enter-n-go in the acc or on/run mode. A child could operate power win- dows, other controls, or move the vehicle. • do not leave children or animals inside parked vehicles in hot weather. Interior heat b...

  • Page 21

    Vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid key fob is used to start the engine. After turning the ignition switch to the on/run posi- tion, the vehicle security light will turn on for three seconds for a bulb check. If the l...

  • Page 22

    Caution! • always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unat- tended. • with keyless enter-n-go, always remember to place the ignition in off. At the time of purchase, the original owner is provided with a four-digit personal identification number (pin). Ke...

  • Page 23

    Audio and visual signals, the horn will sound, the head- lights will turn on, park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver’s door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn...

  • Page 24

    Exterior zone (refer to ⬙ keyless enter-n-go ⬙ in ⬙ things to know before starting your vehicle ⬙ for further informa- tion). • press the lock button on the remote keyless entry (rke) transmitter. 3. If any doors are open, close them. To disarm the system the vehicle security alarm can be disarmed u...

  • Page 25

    • when the vehicle security alarm is armed, the interior power door lock switches will not unlock the doors. The vehicle security alarm is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If one of the previ- ously described arming se...

  • Page 26

    Note: • the front courtesy overhead console and door cour- tesy lights do not turn on if the dimmer control is in the ⬙ dome on ⬙ position (extreme top position). • the illuminated entry system will not operate if the dimmer control is in the “dome defeat” position (extreme bottom position). Remote ...

  • Page 27

    To unlock the doors press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Refer to “keyless enter-n-go” under “things...

  • Page 28

    To lock the doors press and release the lock button on the rke transmit- ter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Refer to “keyless enter-n-go” under “things to know before starting your vehicle” for further information. Sound horn wi...

  • Page 29

    Note: • perchlorate material — special handling may apply. See www.Dtsc.Ca.Gov/hazardouswaste/perchlorate • do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch at the top of the rke transmitter side...

  • Page 30

    2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the rke transmitter apart. Make sure not to damage the seal during removal. 3. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sig...

  • Page 31

    4. To assemble the rke transmitter case, snap the two halves together. General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept ...

  • Page 32

    How to use remote start all of the following conditions must be met before the engine will remote start: • shift lever in park • doors closed • hood closed • liftgate/flipper glass closed • hazard switch off • brake switch inactive (brake pedal not pressed) • ignition key removed from ignition switc...

  • Page 33

    Remote start abort message on electronic vehicle information center (evic) — if equipped the following messages will display in the evic if the vehicle fails to remote start or exits remote start prema- turely: • remote start aborted — door ajar • remote start aborted — hood ajar • remote start abor...

  • Page 34

    • the engine can be started two consecutive times with the rke transmitter. However, the ignition must be cycled by pushing the start/stop button twice (or the ignition switch must be cycled to the on/run position) before you can repeat the start sequence for a third cycle. To exit remote start mode...

  • Page 35

    • for vehicles equipped with the keyless enter-n-go feature, the message “remote start active — push start button” will display in the evic until you push the start button. Remote start comfort systems — if equipped when remote start is activated, the heated steering wheel, and driver heated seat fe...

  • Page 36

    Door locks the power door locks can be manually locked from inside the vehicle by using the door lock knob. To lock each door, push the door lock knob on each door trim panel downward. To unlock the front doors, pull the inside door handle to the first detent. To unlock the rear doors, pull the door...

  • Page 37

    Warning! (continued) • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or oth...

  • Page 38

    If a rear door is locked, it cannot be opened from inside the vehicle without first unlocking the door. The door may be unlocked manually by raising the lock knob. Automatic door locks — if equipped the auto door lock feature default condition is disabled. When enabled, the door locks will lock auto...

  • Page 39

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged (locked). Child-protection door lock location child-protection door lock function 2 things to know before starting your vehicle 37.

  • Page 40

    Note: for emergency exit from the rear seats when the child-protection door lock system is engaged, manually raise the door lock knob to the unlocked position, roll down the window, and open the door using the outside door handle. Keyless enter-n-go the passive entry system is an enhancement to the ...

  • Page 41

    Note: if “unlock all doors 1st press” is programmed all doors will unlock when you grab hold of the driver’s front door handle. To select between “unlock driver door 1st press” and “unlock all doors 1st press”, refer to “electronic vehicle information center (evic)/personal settings (customer-progra...

  • Page 42

    Preventing inadvertent locking of passive entry rke transmitter in vehicle to minimize the possibility of unintentionally locking a passive entry rke transmitter inside your vehicle, the passive entry system is equipped with an automatic door unlock feature which will function if there is no key fob...

  • Page 43

    Note: if “unlock all doors 1st press” is programmed in evic, all doors will unlock when you push the button on the liftgate. If ⬙ unlock driver door 1st press ⬙ is programmed in evic, the liftgate and flipper glass will unlock when you press the button on the liftgate for further information, refer ...

  • Page 44

    Note: • after pressing the door handle lock button, you must wait two seconds before you can lock or unlock the doors, using either passive entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • the pas...

  • Page 45

    Warning! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with keyless enter- n-go in the acc or on/run position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may ...

  • Page 46

    During auto up. If this happens, pull the switch lightly to the first detent and hold it to close the window manually. Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the auto up feature should the au...

  • Page 47

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and ...

  • Page 48

    Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate. Note: the liftgate flipper glass will not open if the liftgate is ajar. Once the liftgate flipper glass has been opened, ...

  • Page 49

    Power liftgate — if equipped the power liftgate may be opened by pulling up on the liftgate handle or by pressing the liftgate button on the remote keyless entry (rke) transmitter. Press the liftgate button on the rke transmitter twice within five seconds, to open the power liftgate. Once the liftga...

  • Page 50

    Warning! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. Note: • the power liftgate will not operate if the liftgate flipper glass is open. • the power liftgate buttons will...

  • Page 51

    • if the liftgate handle is pulled while the power liftgate is opening, the liftgate motor will disengage to allow manual operation. • if the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and the liftgate must be opened or closed manu- ally...

  • Page 52

    Occupant restraints some of the most important safety features in your vehicle are the restraint systems: • three-point lap and shoulder belts for the driver and all passengers • advanced front air bags for driver and front passen- ger • supplemental active head restraints (ahr) located on top of th...

  • Page 53

    Infant and child restraint systems. For more information on latch, refer to lower anchors and tether for children (latch). Note: the advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision. He...

  • Page 54

    3. The driver and front passenger seats should be moved back as far as practical to allow the advanced front air bags room to inflate. 4. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between...

  • Page 55

    Warning! (continued) • supplemental side air bag inflatable curtain (sabic) and seat-mounted side air bags (sab) also need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • in an accident, you and your passengers can suffer much greater injuries if you...

  • Page 56

    Warning! • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of an accident the best. Wearing your belt in the wrong place could make your injuries in an accident much wo...

  • Page 57

    2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “cli...

  • Page 58

    Warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you properly. In a sudden stop...

  • Page 59

    4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in an accident. Wa...

  • Page 60

    6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow it to retract fully. Warning! A frayed or torn belt could rip apart in an accident and leave you with no protection. In...

  • Page 61

    Adjustable upper shoulder belt anchorage in the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the anchorage, and then move it up or down to the position that fits you best. As a guide, if yo...

  • Page 62

    Additional information, refer to “installing child re- straints using the vehicle seat belt” under the “child restraints” section. The chart below defines the type of feature for each seating position. Driver center passenger first row n/a n/a alr second row alr alr alr third row n/a n/a n/a • n/a —...

  • Page 63

    How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in t...

  • Page 64

    Seat belt pretensioners the seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of an accident. These devices may improve the performance of the seat belt by assuring that the belt is tight about the oc...

  • Page 65

    However if during a front impact, a secondary rear impact occurs, the ahr may deploy based on the sever- ity and type of the impact. Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions ...

  • Page 66

    1. Grasp the deployed ahr from the rear seat. 2. Position the hands on the top of the deployed ahr at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand positioning points on ahr 1 — downward movement 2 — rearward moveme...

  • Page 67

    4. The ahr front soft foam and trim half should lock into the back decorative plastic half. Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an autho...

  • Page 68

    Enhanced seat belt use reminder system (beltalert 姞 ) beltalert 威 is a feature intended to remind the driver and front passenger (if equipped with front passenger beltalert 威 ) to fasten their seat belts. The feature is active whenever the ignition is on. If the driver or front seat passenger is unb...

  • Page 69

    Seat belt lock out the center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged. Seat belts and pregnant women we recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the moth...

  • Page 70

    Instrument panel, above the glove compartment. The words srs airbag are embossed on the air bag covers. Note: these air bags are certified to the new federal regulations for advanced air bags. The advanced front air bags have a multistage inflator design. This allows the air bag to have different ra...

  • Page 71

    This vehicle is equipped with supplemental seat- mounted side air bags (sab) to provide enhanced protection for an occupant during a side impact. The supplemental seat-mounted side air bags are located in the outboard side of the front seats. Note: • air bag covers may not be obvious in the interior...

  • Page 72

    Advanced front air bag features the advanced front air bag system has multistage driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as determined by the occupant restraint controller (orc), which may receive information from the front i...

  • Page 73

    Supplemental seat-mounted side air bags (sab) supplemental seat-mounted side air bags (sab) may provide enhanced protection to help protect an occupant during a side impact. The sab is marked with an air bag label sewn into the outboard side of the front seats. When the air bag deploys, it opens the...

  • Page 74

    Supplemental side air bag inflatable curtain (sabic) sabic air bags may offer side-impact and vehicle roll- over protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboa...

  • Page 75

    Note: • air bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • being too close to the sab and sabic air bags during deployment could cause you to be severely injured or killed. • should a vehicle rollover occur, the pretensioners and/or sab and sabic ...

  • Page 76

    Warning! (continued) • your vehicle is equipped with sabic air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require perma- nent attachments (bolts or screws) for installation on the vehicle roof. Do ...

  • Page 77

    Certain frontal collisions depending on the severity and type of collision. Advanced front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The advanced front air bags will not deploy in all frontal collisions, including some that may produce sub- stantia...

  • Page 78

    Also, the orc turns on the air bag warning light in the instrument panel for approxi- mately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the air bag warning light will turn off. If the orc detects a malfunction in any part of the system, it turn...

  • Page 79

    Are possible, based on the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds. This is about half of the...

  • Page 80

    A quantity of non-toxic gas is generated to inflate the sabic. The inflating sabic pushes the outside edge of the headliner out of the way and covers the window. The sabic inflates in about 30 milliseconds (about one- quarter of the time that it takes to blink your eyes) with enough force to injure ...

  • Page 81

    If a deployment occurs the advanced front air bags are designed to deflate immediately after deployment. Note: front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or al...

  • Page 82

    Warning! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retrac- tor assemblies replaced by an authorized dealer im- mediately. Also, have the occupant restraint con- troller (orc) system servi...

  • Page 83

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, includ- ing your trim cover and cushio...

  • Page 84

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of t...

  • Page 85

    To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. ...

  • Page 86

    Facing child safety seat. Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats. The infant carrier is only used rearward-facing in the vehicle. It is recommended for children from birth until they reach the weight or height limit of the infant carrie...

  • Page 87

    Here are some tips for getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. Chrysler group llc also recommends that you try a child restraint in the vehicle seats where you will use...

  • Page 88

    Note: for additional information, refer to www.Seatcheck.Org or call 1–866–seatcheck. Cana- dian residents should refer to transport canada’s web- site for additional information: http://www.Tc.Gc.Ca/ roadsafety/safedrivers/childsafety/index.Htm older children and child restraints children who are t...

  • Page 89

    • check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • if the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind the back. Lower anchors and tet...

  • Page 90

    Webbing-mounted lower attachments and child seats with fixed lower attachments. The rear seat lower an- chors can be readily identified by the symbol located on the seatback directly above the anchorages and are just visible when you lean into the rear seat to install the child restraint. You will e...

  • Page 91

    In addition, there are top tether strap anchorages behind each rear seating position located on the back of the seat. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor panel away from the seat back, this will expose the top tether strap anchorages. Latch anchora...

  • Page 92

    Warning! Do not use the cargo tie downs located on the load floor. Improper usage of the tether can lead to a failure of an infant or child restraint. The child could be badly injured or killed. Many, but not all, restraint systems will be equipped with separate straps on each side, with each having...

  • Page 93

    Gap panel. They are not visible until you fold the gap panel down. Do not use the cargo tie down hooks located on the floor behind the seat. Finally, tighten all three straps as you push the child restraint rearward and downward into the seat, removing slack in the straps according to the child rest...

  • Page 94

    Installing a child restraint with an alr: 1. To install a child restraint with alr, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a “click.” next, extract all the seat belt...

  • Page 95

    Pull down on the tether to unhook it from the plastic seat backing, then raise the armrest and attach the tether hook to the strap located on the front of the arm rest. For center seating position route the tether strap over the seatback and headrest then attach the hook to the tether anchor located...

  • Page 96

    Top tether strap anchorage (located on seatback) top tether strap mounting 94 things to know before starting your vehicle.

  • Page 97

    Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly be- hind the child seat to secure a child restraint top tether strap. • do not use the cargo tie downs located on the load floor. Improper usag...

  • Page 98

    While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving t...

  • Page 99

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), whi...

  • Page 100

    Damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each ...

  • Page 101

    Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...

  • Page 102

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...

  • Page 103: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ▫ inside day/night mirror . . . . . . . . . . . . . . . 109 ▫ automatic dimming mirror — if equipped . . 110 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . . 111 ▫...

  • Page 104

    ▫ things you should know about your uconnect™ phone . . . . . . . . . . . . . . . . . . . . 133 ▫ general information . . . . . . . . . . . . . . . . . . 144 䡵 voice command — if equipped . . . . . . . . . . . 144 ▫ voice command system operation . . . . . . . . 144 ▫ commands . . . . . . . . . . . ...

  • Page 105

    ▫ setting memory positions and linking remote keyless entry transmitter to memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 ▫ memory position recall . . . . . . . . . . . . . . . . 178 ▫ to disable a rke transmitter linked to memory . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 106

    ▫ lane change assist . . . . . . . . . . . . . . . . . . . 191 ▫ flash-to-pass . . . . . . . . . . . . . . . . . . . . . . . 191 ▫ high/low beam switch . . . . . . . . . . . . . . . 191 䡵 windshield wipers and washers . . . . . . . . . . 192 ▫ windshield wiper operation . . . . . . . . . . . . 193 ▫...

  • Page 107

    ▫ to cancel . . . . . . . . . . . . . . . . . . . . . . . . . . 211 ▫ to turn off . . . . . . . . . . . . . . . . . . . . . . . . 212 ▫ to resume speed . . . . . . . . . . . . . . . . . . . . 212 ▫ to vary the speed setting . . . . . . . . . . . . . . 213 ▫ setting the following distance in acc . . ...

  • Page 108

    䡵 overhead console . . . . . . . . . . . . . . . . . . . . . 244 ▫ front map/reading lights . . . . . . . . . . . . . 244 ▫ sunglass bin door . . . . . . . . . . . . . . . . . . . 245 䡵 garage door opener — if equipped . . . . . . . . 246 ▫ before you begin programming homelink 威 . . . . . . . . . ....

  • Page 109

    䡵 commandview 威 sunroof with power shade — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . 258 ▫ opening sunroof — express . . . . . . . . . . . . 259 ▫ opening sunroof — manual mode . . . . . . . . 259 ▫ closing sunroof — express . . . . . . . . . . . . . 260 ▫ closing sunroof — man...

  • Page 110

    ▫ retractable cargo area cover — if equipped . . . . . . . . . . . . . . . . . . . . . . . . 275 ▫ cargo tie-down hooks . . . . . . . . . . . . . . . . 276 䡵 rear window features . . . . . . . . . . . . . . . . . . 278 ▫ rear window wiper/washer . . . . . . . . . . . . 278 ▫ rear window defroster . ...

  • Page 111

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield). Headlight glare can be reduced b...

  • Page 112

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light in the button will illuminate to indicate when the dim- ming feature is activated. The m...

  • Page 113

    Outside mirrors to receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they ...

  • Page 114

    Mirror, press the mirror select button for the mirror that you want to adjust. Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move. Power mirror preselected positions can be controlled by the optional memory seat feature. Refer to “driv...

  • Page 115

    Shifted out of reverse position. Each stored memory setting will have an associated tilt mirrors in reverse position. Note: the tilt mirrors in reverse feature is not en- abled when delivered from the factory. The tilt mirrors in reverse feature can be enabled or disabled in the elec- tronic vehicle...

  • Page 116

    Uconnect™ phone — if equipped uconnect™ phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.G., “call” ѧ “mike” ѧ “work” or “dial” ѧ “248-555-1212”). Your mobile phone’s a...

  • Page 117

    System. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in english, spanish, or french languages. Warning! Any voice commanded system should be used only in safe driving conditions following local laws and phone use. All attention should be kep...

  • Page 118

    Operation voice commands can be used to operate the uconnect™ phone and to navigate through the uconnect™ phone menu structure. Voice commands are required after most uconnect™ phone prompts. You will be prompted for a specific command and then guided through the available options. • prior to giving...

  • Page 119

    Cancel command at any prompt, after the beep, you can say “cancel” and you will be returned to the main menu. However, in a few instances the system will take you back to the previous menu. Pair (link) uconnect™ phone to a mobile phone to begin using your uconnect™ phone, you must pair your compatib...

  • Page 120

    Phone to use if multiple mobile phones are in the vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the uconnect™ phone will use the priority three mobile phone when you make a call. You can select to use a lower priority mobile phone at an...

  • Page 121

    • the uconnect™ system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios. Add names to your uconnect™ phonebook note: adding names to the uconnect™ phonebook is recommended when the vehicle is not in motion. • press the button to be...

  • Page 122

    Phonebook download – automatic phonebook transfer from mobile phone if equipped and specifically supported by your phone, uconnect™ phone automatically downloads names (text names) and number entries from your mobile phone’s phonebook. Specific bluetooth 威 phones with phone book access profile may s...

  • Page 123

    Edit uconnect™ phonebook entries note: • editing names in the phonebook is recommended when the vehicle is not in motion. • automatic downloaded phonebook entries cannot be deleted or edited. • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook edit entry”. ...

  • Page 124

    • after you enter the phonebook delete menu, you will then be asked for the name of the entry that you wish to delete. You can either say the name of a phonebook entry that you wish to delete or you can say “list names” to hear a list of the entries in the phonebook from which you choose. To select ...

  • Page 125

    List all names in the uconnect™ phonebook • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook list names”. • the uconnect™ phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • to call one of t...

  • Page 126

    Answer or reject an incoming call — call currently in progress if a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Press the button to place the current call on hold and answ...

  • Page 127

    Conference call when two calls are in progress (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-way calling to initiate three-way calling, press the button while a call is in progress, ...

  • Page 128

    Call continuation call continuation is the progression of a phone call on the uconnect™ phone after the vehicle ignition key has been switched to off. Call continuation functionality avail- able on the vehicle can be any one of three types: • after the ignition key is switched to off, a call can con...

  • Page 129

    Emergency assistance if you are in an emergency and the mobile phone is reachable: • pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the uconnect™ phone is operational, you may reach the emergency number as follows: • press the button to begi...

  • Page 130

    Towing assistance if you need towing assistance: • press the button to begin. • after the “ready” prompt and the following beep, say “towing assistance”. Note: • the towing assistance number dialed is based on the country where the vehicle is purchased (1-800-528- 2069 for the u.S., 1-877-213-4525 f...

  • Page 131

    When calling a number with your uconnect™ phone that normally requires you to enter in a touch-tone sequence on your mobile phone keypad, you can press the button and say the sequence you wish to enter, followed by the word “send”. For example, if required to enter your pin followed with a pound, (3...

  • Page 132

    Turning confirmation prompts on/off turning confirmation prompts off will stop the system from confirming your choices (e.G., the uconnect™ phone will not repeat a phone number before you dial it). • press the button to begin. • after the “ready” prompt and the following beep, say one of the followi...

  • Page 133

    Mute/un-mute (mute off) when you mute the uconnect™ phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the uconnect™ phone: • press the button. • following the beep, say “mute”. In order to un-mute th...

  • Page 134

    • when prompted, say “list phones”. • the uconnect™ phone will play the phone names of all paired mobile phones in order from the highest to the lowest priority. To “select” or “delete” a paired phone being announced, press the button and say “select” or “delete”. Also, see the next two sec- tions f...

  • Page 135

    Things you should know about your uconnect™ phone uconnect™ phone tutorial to hear a brief tutorial of the system features, press the button and say “uconnect™ tutorial.” voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers, the uconnect™ pho...

  • Page 136

    Voice command • for best performance, adjust the rearview mirror to provide at least 1 ⁄ 2 in (1 cm) gap between the overhead console (if equipped) and the mirror. • always wait for the beep before speaking. • speak normally, without pausing, just as you would speak to a person sitting a few feet/me...

  • Page 137

    • numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • you can say “o” (letter “o”) for “0” (zero). • even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • in a ...

  • Page 138

    Sms uconnect™ phone can read or send new messages on your phone. Read messages: if you receive a new text message while your phone is connected to uconnect™ phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • press the button. • ...

  • Page 139

    List of preset messages: 1. Yes 2. No 3. Where are you? 4. I need more direction. 5. L o l 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 11. See you in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18....

  • Page 140

    Bluetooth 威 communication link mobile phones have been found to lose connection to the uconnect™ phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Your mobile phone is recommended to remain in bluetooth 威 on mode. Power-up after switching the igni...

  • Page 141

    3 understanding the features of your vehicle 139.

  • Page 142

    140 understanding the features of your vehicle.

  • Page 143

    3 understanding the features of your vehicle 141.

  • Page 144

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 142 unders...

  • Page 145

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 146

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 147

    Note: if you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system i...

  • Page 148

    Changing the volume 1. Start a dialogue by pressing the voice command button. 2. Say a command (e.G., “help”). 3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different th...

  • Page 149

    Radio fm to switch to the fm band, say “fm” or “radio fm”. In this mode, you may say the following commands: • “frequency #” (to change the frequency) • “next station” (to select the next station) • “previous station” (to select the previous station) • “menu radio” (to switch to the radio menu) • “m...

  • Page 150

    Memo to switch to the voice recorder mode, say “memo”. In this mode, you may say the following commands: • “new memo” (to record a new memo) — during the recording, you may press the voice command button to stop recording. You proceed by saying one of the following commands: − “save” (to save the me...

  • Page 151

    In this mode, you may say the following commands: • “language english” • “language french” • “language spanish” • “tutorial” • “voice training” note: keep in mind that you have to press the voice command button first and wait for the beep before speaking the “barge in” commands. Voice training for u...

  • Page 152

    Blind spot monitoring — if equipped the blind spot monitoring (bsm) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle. Whe...

  • Page 153

    • the bsm system detection zone does not change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.E., bicycle, sports equipment) extends beyond the side of your v...

  • Page 154

    Audible (chime) alert and reducing the radio volume. Refer to “modes of operation” for further information. The bsm system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary. The bsm system will issue an alert during these ...

  • Page 155

    Entering from the rear vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking traffic if you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains ...

  • Page 156

    The bsm system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service. Overtaking/passing stationary objects 154 unde...

  • Page 157

    The bsm system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Warning! The blind spot monitoring system is only an aid to help detect objects in the blind spot zones. The bsm system is not designed to detect pedestrians, bicy- clists, or ...

  • Page 158

    Rear cross path the rear cross path (rcp) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed. The rcp system will then hav...

  • Page 159

    Note: in a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When rcp is on and the vehicle is in reverse, the driver is alerted using both the visua...

  • Page 160

    Signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are present on the same side at the same time, both the visual and audio alerts will be issued. In addition to the audible a...

  • Page 161

    Seats seats are part of the occupant restraint system of the vehicle. Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of your ...

  • Page 162

    Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...

  • Page 163

    Warning! (continued) • do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Caution! Do not place any article under a power seat or impede its abili...

  • Page 164

    The seat switch, the front of the seat cushion will move in the direction of the switch. Release the switch when you have reached the desired position. Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collisio...

  • Page 165

    Manual front seats forward/rearward adjustment some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under t...

  • Page 166

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 167

    Front passenger seat fold-flat feature — if equipped to fold the seatback to the flat load-floor position, lift the recline lever and push the seatback forward. To return to the seating position, raise the seatback and lock it into place. Heated seats — if equipped on some models, the front and rear...

  • Page 168

    Warning! (continued) • do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Vehicles equipped...

  • Page 169

    The system will automatically switch to low-level after a maximum of 50 minutes of continuous operation. At that time, the number of illuminated leds changes from two to one, indicating the change. The low-level setting will turn off automatically after a maximum of 45 minutes. Rear heated seats on ...

  • Page 170

    Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut the heating elements off. Note: once a heat setting is selected, heat will be felt within two to five minutes. When the high-level setting is selected...

  • Page 171

    Note: the engine must be running for the ventilated seats to operate. Vehicles equipped with remote start on models that are equipped with remote start, the driver’s ventilated seat can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to know...

  • Page 172

    When ahrs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the ahr. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear imp...

  • Page 173

    Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. Active head restraint (normal position) active head restraint (tilted) 3 understanding the features of your vehicl...

  • Page 174

    • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head restraints (ahr)” in “things to know before starting your vehicle” for further information. Warning! • do not place items over the top of the active head restraint, such as coats, seat cov...

  • Page 175

    The center head restraint has limited adjustment. Lift upward on the head restraint to raise it, or push down- ward on the head restraint to lower it. Warning! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure t...

  • Page 176

    Note: be sure that the front seats are fully upright and positioned forward. This will allow the rear seatback to fold down easily. 1. Pull upward on the release lever to release the seat. Note: • do not fold the 60% rear seat down with the left outboard or rear center seat belt buckled. • do not fo...

  • Page 177

    To raise rear seat raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Warning! • be certain that the seatback is securely locked into position. If the seat...

  • Page 178

    Reclining rear seat to recline the seatback, lift the lever located on the outboard side of the seat, lean back and release the lever at the desired position. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the seatback reclined so that the shoul...

  • Page 179

    Your vehicle is equipped with two rke transmitters. One or both rke transmitters can be linked to either memory position. The memory system can accommodate up to four rke transmitters, each one linked to either of the two memory positions. Setting memory positions and linking remote keyless entry tr...

  • Page 180

    5. Turn on the radio and set the radio station presets (up to 12 am and 12 fm stations can be set). 6. Turn the ignition switch to the lock/off position and remove the key. 7. Press and release the s (set) button located on the driver’s door. 8. Within five seconds, press and release memory button 1...

  • Page 181

    To recall the memory setting for driver two, press memory button number 2 on the driver’s door, or the unlock button on the rke transmitter linked to memory position 2. A recall can be cancelled by pressing any of the memory buttons on the drivers door during a recall (s, 1, or 2). When a recall is ...

  • Page 182

    Easy entry/exit seat this feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. There are two possible easy entry/exit adjustments available: • the seat cushion will move rearward approximately 2.5 in (60 mm), if the starting position of...

  • Page 183

    To open and close the hood to open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver’s door. 2. Reach under the hood, move safety latch to the left and lift the hood. Caution! To prevent possible damage, do not slam the ho...

  • Page 184

    Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Lights headlight switch the headlight switch is located...

  • Page 185

    Note: • your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore differ- ent lens cleaning procedures must be followed. • to minimize the po...

  • Page 186

    Information center (evic)/customer-programmable features” in “understanding your instrument panel” for further information. If your vehicle is equipped with a “rain sensitive wiper system” and it is activated, the headlights will automati- cally turn on after the wipers complete five wipe cycles wit...

  • Page 187

    Note: this system will not activate until the vehicle is at or above 20 mph (32 km/h). To deactivate 1. Pull the multifunction lever toward you (or rearward in car) to manually deactivate the system (normal opera- tion of low beams). 2. Push back on the multifunction lever once again to reactivate t...

  • Page 188

    On, and then the headlight switch is cycled off. Headlight delay can be cancelled by either turning the headlight switch on then off, or by turning the ignition on. The headlight delay time is programmable on vehicles equipped with an electronic vehicle information center (evic). Refer to “electroni...

  • Page 189

    Turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Interior lights courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the right side of the headlight...

  • Page 190

    Ambient light color control — if equipped ambient lights are located under the instrument panel and the driver’s and passenger’s front seats. The color of the ambient lights can be changed by pressing the button located above the shift lever. Press the button to toggle through the colors and back to...

  • Page 191

    Front map/reading lights the front map/reading lights are mounted in the over- head console. Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second time. The lights will al...

  • Page 192

    Ambient light the overhead console is equipped with an ambient light feature. This light casts illumination for improved visibil- ity of the floor center console and prndl area. Multifunction lever the multifunction lever is located on the left side of the steering column. Ambient light multifunctio...

  • Page 193

    Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside l...

  • Page 194

    Windshield wipers and washers the windshield wiper/washer control lever is located on the left side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. For information on the rear wiper/washer, refer to “rear window features” in “understanding...

  • Page 195

    Windshield wiper operation rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. Caution! Always remove any buildup of snow that prevents the windshield wiper blades fro...

  • Page 196

    Intermittent wiper system use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable. At driving speeds above 10 mph (16 km/h), the delay can be regulated from a maximum of approximately 18 seconds between cycle...

  • Page 197

    Windshield washer operation to use the washer, push on the end of the lever (toward the steering wheel) and hold while spray is desired. If the lever is pushed while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the end of the lever is released, and t...

  • Page 198

    Warning! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Mist use the mist...

  • Page 199

    From the windshield washers of the vehicle ahead. Rotate the end of the multifunction lever to one of four settings to activate this feature. The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least sensitive, and wiper delay position 4 is the m...

  • Page 200

    • transmission in neutral position — when the ignition is on, and the transmission is in the neu- tral position, the rain sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the neutral position. Tilt/teles...

  • Page 201

    Warning! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this war...

  • Page 202

    Transmitter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre-programmed positions. Refer to “driver memory seat” in this section for further information. Warning! Do not adjust the steering column while driving. Adjusting the steering column w...

  • Page 203

    Note: the engine must be running for the heated steering wheel to operate. Vehicles equipped with remote start on models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to kn...

  • Page 204

    Electronic speed control when engaged, the electronic speed control takes over accelerator operations at speeds greater than 20 mph (32 km/h). The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed c...

  • Page 205

    System can be reactivated by pushing the electronic speed control on/off button and resetting the desired vehicle set speed. To activate push the on/off button. The cruise indicator light in the instrument cluster will illuminate. To turn the system off, push the on/off button a second time. The cru...

  • Page 206

    To resume speed to resume a previously set speed, push the res (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). To vary the speed setting when the electronic speed control is set, you can in- crease speed by pushing the res (+) button. If the button is continually pres...

  • Page 207

    On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without electronic speed control. Warning! Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your ve- hicle could go too fast for the conditions, and you could lose cont...

  • Page 208

    Warning! • adaptive cruise control (acc) is a convenience system. It is not a substitute for active driving involvement. It is always the driver’s responsibil- ity to be attentive of road, traffic, and weather conditions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake ope...

  • Page 209

    Warning! You should switch off the acc system: • when driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving situations (i.E., in highway construction zones). • when entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snow-covered, slippe...

  • Page 210

    Adaptive cruise control (acc) operation the speed control buttons (located on the right side of the steering wheel) operates the acc system. Note: any chassis/suspension modifications to the vehicle will effect the performance of the adaptive cruise control. Activating adaptive cruise control (acc) ...

  • Page 211

    • when the automatic transmission is in park, re- verse or neutral. • when pushing the res + button without a previously set speed in memory. To activate push and release the on/off button. The acc menu in the evic displays “adaptive cruise ready.” to turn the system off, push and release the on/off...

  • Page 212

    Warning! Leaving the adaptive cruise control (acc) system on when not in use is dangerous. You could acciden- tally set the system or cause it to go faster than you want. You could lose control and have a collision. Always leave the system off when you are not using it. To set a desired acc speed wh...

  • Page 213

    • the system will not be controlling the distance be- tween your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accelerator pedal. To cancel the system will disable acc without erasing the memory if: • you softly tap the brake pedal. • you depress the...

  • Page 214

    Note: if acc is resumed or set with the esc/tcs off, esc will automatically be re-engaged. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you switch to four-wheel drive low. To resume speed press the res + butto...

  • Page 215

    To vary the speed setting while acc is set, you can increase the set speed by pressing and holding the res + button. If the button is continually pressed, the set speed will continue to in- crease in 5 mph (8 km/h) increments until the button is released. The increase in set speed is reflected in th...

  • Page 216

    Setting the following distance in acc the specified following distance for acc can be set by varying the distance setting between 3 (long), 2 (me- dium), and 1 (short). Using this distance setting and the vehicle speed, acc calculates and sets the distance to the vehicle ahead. This distance setting...

  • Page 217

    To change the distance setting, press the distance button and release. Each time the button is pressed, the distance setting adjusts between long, medium, and short. If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the ev...

  • Page 218

    The maximum braking applied by acc is limited; how- ever, the driver can always apply the brakes manually, if necessary. Note: the brake lights will illuminate whenever the acc system applies the brakes. A proximity warning will alert the driver if acc predicts that its maximum braking level is not ...

  • Page 219

    Cluster between the speedometer and the tachometer. The information it displays depends on acc system status. Press the menu button (located on the steer- ing wheel) repeatedly until one of the follow- ing displays in the evic: adaptive cruise control off − when acc is deactivated, the display will ...

  • Page 220

    The acc screen will display once again if any acc activity occurs, which may include any of the following: • set speed change • distance setting change • system cancel • driver override • system off • acc proximity warning • acc unavailable warning the evic will return to the last display selected a...

  • Page 221

    Note: if the acc “clean radar sensor in front of vehicle” warning is active normal (fixed speed) cruise control is still available. For additional information refer to “normal (fixed speed) cruise control mode” in this section. If weather conditions are not a factor, the driver should examine the se...

  • Page 222

    • do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an acc system failure or malfunction. When the condition that deactivated the system is no longer present, the system will return to the “adaptive cruise control of...

  • Page 223

    Note: do not change the adjustment fasteners or pull the sensor off of the bracket. Doing so may misalign the sensor. Store the sensor and bracket assembly in a safe location. The wiring and connector must be stowed properly after the sensor and bracket assembly is removed. A connector plug is stowe...

  • Page 224

    Service acc warning if the system turns off, and the evic displays “acc/ fcw unavailable service radar sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer. Precautions while driving w...

  • Page 225

    Offset driving acc may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly. Tur...

  • Page 226

    Using acc on hills when driving on hills, acc may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, acc perfor- mance may be limited. Lane changing acc will not detect a vehicle until it is completely in the lane in which you...

  • Page 227

    Narrow vehicles some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be suffi- cient distance to the vehicle ahead. 3 understanding the features of your vehicle 225.

  • Page 228

    Stationary objects and vehicles acc does not react to stationary objects and stationary vehicles. For example, acc will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if nece...

  • Page 229

    Warning! In the normal cruise control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since the presence of the vehicle ahead nor the vehicle-to- vehicle distance is detecte...

  • Page 230

    To resume press the res + button and then remove your foot from the accelerator pedal. The evic will display the last set speed. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you engage four-wheel drive low. If...

  • Page 231

    Note: • the minimum speed for fcw activation is 10 mph (16 km/h). • when entering or driving in a curve, the fcw alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course predic- tion. This is expected and is a part of normal fcw activation and func...

  • Page 232

    Fcw settings can only be changed when the vehicle is in park. The default status of fcw is the “far” setting, this allows the system to warn you of a possible collision with the vehicle in front of you when you are farther away. This gives you the most reaction time. Changing the fcw status to the “...

  • Page 233

    Changing the fcw status to “off” prevents the system from warning you of a possible collision with the vehicle in front of you. Note: in the “off” setting fcw off will be displayed in the evic. Note: • the system will retain the last setting selected by the driver after ignition shut down. • fcw wil...

  • Page 234

    Of the car, stationary objects that are far away, oncom- ing traffic, or leading vehicles with the same or higher rate of speed. • fcw will be disabled like acc below with the un- available screens. Fcw unavailable warning if the system turns off, and the evic displays “acc/ fcw unavailable, vehicle...

  • Page 235

    Parksense 姞 rear park assist — if equipped the parksense 威 rear park assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.G. During a parking maneuver. Refer to parksense 威 system usage precautions for limitations of...

  • Page 236

    The parksense 威 warning display is located in the instru- ment cluster’s evic display. It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. Parksense 姞 display when the vehicle is in reverse, the warning display will turn on ...

  • Page 237

    The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. Park assist system off slow tone 3 under...

  • Page 238

    The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: fast tone continuous tone 236 understanding the features of your vehicle.

  • Page 239

    Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous display message park assist system on warning object detected warning object de...

  • Page 240

    Enabling and disabling parksense 姞 parksense 威 can be enabled and disabled with a switch located in the switch bank of the instrument panel or through the customer-programmable features section of the evic. The available choices are: off, sound only, or sound and display. Refer to “electronic vehicl...

  • Page 241

    If “clean park assist sensors” appears in the electronic vehicle information center (evic) make sure the rear fascia/bumper is clean and clear of snow, ice, mud, dirt or other obstruction and then cycle the ignition. If the message continues to appear see an authorized dealer. If “service park assis...

  • Page 242

    • parksense 威 , when on, will mute the radio when it is sounding a tone. • clean the parksense 威 sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly. T...

  • Page 243

    Warning! • drivers must be careful when backing up even when using the parksense 威 rear park assist sys- tem. Always check carefully behind your vehicle, look behind you, and be sure to check for pedes- trians, animals, other vehicles, obstructions, and blind spots before backing up. You are respons...

  • Page 244

    Parkview 姞 rear back up camera — if equipped your vehicle may be equipped with the parkview 威 rear back up camera that allows you to see an on-screen image of the rear surroundings of your vehicle whenever the shift lever is put into reverse. The image will be displayed on the navigation/multimedia ...

  • Page 245

    Warning! Drivers must be careful when backing up even when using the parkview 威 rear back up camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up. You are responsible for the safety of your...

  • Page 246

    4. Enable or disable the rear camera feature by selecting the “enable rear camera in reverse” soft-key. 5. Press the “save” soft-key. Turning parkview 姞 on or off — without navigation/multimedia radio 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 3. Enable or disable the rear came...

  • Page 247

    To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the unlock button on the rke is pressed. Sunglass bin door at the front of the console a compartment is provided for the storage of a pair of sunglasses. The stora...

  • Page 248

    Garage door opener — if equipped homelink 威 replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The homelink 威 unit is powered by your vehicles 12 volt battery. The homelink 威 buttons, located on either t...

  • Page 249

    Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Before you begin programming homelink 姞 be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is rec...

  • Page 250

    Programming a rolling code for programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “learn” or “train” button located where the hanging antenna is attached to the garage door opener. It is not the button that is normally used to open...

  • Page 251

    3. Simultaneously press and hold both the homelink 威 button you want to program and the hand-held transmit- ter button. 4. Continue to hold both buttons and observe the indi- cator light. The homelink 威 indicator will flash slowly and then rapidly after homelink 威 has received the fre- quency signal...

  • Page 252

    2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. Without releasing the button proceed with “program- ming a rolling code” step 2 and follow all remaining steps. Programming a non-rolling code for programming gar...

  • Page 253

    Reprogramming a single homelink 威 button to reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the on/run position. 2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the but...

  • Page 254

    4. Watch for the homelink 威 indicator to change flash rates. When it changes, it is programmed. It may take up to 30 seconds or longer in rare cases. The garage door may open and close while you are programming. 5. Press and hold the programmed homelink 威 button and observe the indicator light. • if...

  • Page 255

    Security it is advised to erase all channels before you sell or turn in your vehicle. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all channels will be erased. Individual channels cannot be erased. The homelink 威 universal transceiver i...

  • Page 256

    Warning! • your motorized door or gate will open and close while you are programming the universal trans- ceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” fea...

  • Page 257

    Power sunroof — if equipped the power sunroof switch is located between the sun visors on the overhead console. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating t...

  • Page 258

    Opening sunroof — express press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- cally. This is called “express open”. During express open operation, any movement of the sunroof switch ...

  • Page 259

    Note: if three consecutive sunroof close attempts re- sult in pinch protect reversals, the fourth close attempt will be a manual close movement with pinch protect disabled. Venting sunroof — express press and release the vent button within one half second and the sunroof will open to the vent positi...

  • Page 260

    This feature. The time is programmable. Refer to “elec- tronic vehicle information center (evic)/personal set- tings (customer-programmable features)” in “under- standing your instrument panel” for further information. Commandview 姞 sunroof with power shade — if equipped the commandview 威 sunroof sw...

  • Page 261

    Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in a collision, there is a gre...

  • Page 262

    Closing sunroof — express press the switch forward and release it within one-half second and the sunroof will close automatically from any position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will ...

  • Page 263

    Closing power shade — manual mode to close the shade, press and hold the switch in the forward position. Any release of the switch will stop the movement and the shade will remain in a partially closed condition until the switch is pushed and held forward again. Pinch protect feature this feature wi...

  • Page 264

    Sunroof maintenance use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition off operation the power sunroof switches can be programmed to remain active for up to approximately ten minutes after the ignition switch has been turned off. Refer to “elec- tronic vehicle inform...

  • Page 265

    Caution! Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your new vehicle limited warranty. The front power outlet is located in...

  • Page 266

    In addition to the front power outlet, there is also a power outlet located in the storage area of the center console. The rear power outlet is located in the right rear cargo area. Center console outlet rear power outlet 264 understanding the features of your vehicle.

  • Page 267

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 268

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • ac...

  • Page 269

    The power inverter is designed with built-in overload protection. If the power rating of 150 watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximat...

  • Page 270

    Warning! To avoid serious injury or death: • do not use a three-prong adaptor. • do not insert any objects into the receptacles. • do not touch with wet hands. • close the lid when not in use. • if this outlet is mishandled it may cause an electric shock and failure. Cupholders there are two cuphold...

  • Page 271

    There are two cupholders for the rear seat passengers located in the fold-down center armrest. Storage glove compartment the glove compartment is located on the right side of the instrument panel. Rear cupholders glove compartment 3 understanding the features of your vehicle 269.

  • Page 272

    To open the glove compartment, pull outward on the latch and lower the glove box door. Door storage large storage areas are built into the door panels for easy access. Opened glove compartment door panel storage 270 understanding the features of your vehicle.

  • Page 273

    Center console the center console contains both an upper and a lower storage area. To open the upper storage compartment, pull upward on the small latch located on the lid. Storage compartment storage compartment latches 3 understanding the features of your vehicle 271.

  • Page 274

    Lift upward on the larger of the latches to access the lower storage compartment. Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices whi...

  • Page 275

    Press in on the flashlight to release it. To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Press and release three-press switch 3 understanding the features of your vehicle 273.

  • Page 276

    Cargo storage bins there are four removable storage bins located in the rear cargo area. There are two storage bins located on either side of the cargo area. Two additional storage bins are located under the load floor. To access the lower storage bins, raise the load floor and attach the tether hoo...

  • Page 277

    Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo area. 2. Insert the...

  • Page 278

    3. The liftgate may be opened with the cargo cover in place. Warning! In a collision, a loose cargo cover in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remo...

  • Page 279

    Warning! • to help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts. • cargo tie-down hooks are not safe anchors for a child seat t...

  • Page 280

    Warning! (continued) • do not carry loads which exceed the load limits described on the label attached to the left door or left door center pillar. • always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible. • place as much cargo as possible in front of...

  • Page 281

    Rotate the center portion of the lever upward to the first detent for intermittent operation and to the second detent for continuous rear wiper operation. Rotating the center portion upward once more will activate the washer pump which will continue to operate as long as the switch is held. Upon rel...

  • Page 282

    Note: to prevent excessive battery drain, use the rear window defroster only when the engine is operating. Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior su...

  • Page 283

    Rack frame. Once the crossbar is in the desired position, retighten the with the wrench to lock the crossbar into position. Note: • to help control wind noise when the crossbars are not in use, place the front and rear crossbars approxi- mately 24 in (61 cm) apart. Optimal noise reduction can then b...

  • Page 284

    Caution! (continued) • long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. • travel at reduced speeds and turn corners care- fully when carrying large or heavy loads on the roof ...

  • Page 285: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 287 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 288 䡵 instrument cluster descriptions . . . . . . . . . . . 289 䡵 electronic vehicle information center (evic) . . 299 ▫ electronic ...

  • Page 286

    ▫ keyless enter-n-go display — if equipped . . . . . . . . . . . . . . . . . . . . . . . . 319 ▫ compass / temperature display . . . . . . . . . 320 ▫ customer-programmable features (system setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 䡵 media center 730n/430/430n (rhr/rer/ rbz/...

  • Page 287

    䡵 ipod 威 /usb/mp3 control — if equipped . . . . . 356 ▫ connecting the ipod 威 or external usb device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357 ▫ using this feature . . . . . . . . . . . . . . . . . . . 358 ▫ controlling the ipod 威 or external usb device using radio buttons . . . . ...

  • Page 288

    ▫ unwired 威 stereo headphone lifetime limited warranty . . . . . . . . . . . . . . . . . . . . 382 ▫ system information . . . . . . . . . . . . . . . . . . . 384 䡵 steering wheel audio controls . . . . . . . . . . . . 398 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 399 ▫ cd player . ...

  • Page 289

    Instrument panel features 1 — air outlet 6 — lower switch bank 11 — hood release 2 — instrument cluster 7 — hazard switch 12 — fuel door release 3 — radio 8 — storage bin 13 — headlight switch 4 — glove compartment 9 — esc button 14 — dimmer control 5 — climate controls 10 — ignition switch 4 unders...

  • Page 290

    Instrument cluster 288 understanding your instrument panel.

  • Page 291

    Instrument cluster descriptions 1. Tachometer indicates the engine speed in revolutions per minute (rpm x 1000). 2. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the on/run position. If the light is either not on d...

  • Page 292

    Warning! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to...

  • Page 293

    5. Tow/haul indicator light — if equipped this light will illuminate when the tow/ haul button has been selected. The tow/ haul button is located in the center of the instrument panel (below the climate controls). 6. Turn signal indicator the arrows will flash with the exterior turn signals when the...

  • Page 294

    As it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/ service,...

  • Page 295

    Maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped with a tpms malfunction indicator to indicate when the system is not operating properly. The tpms malfunction indicato...

  • Page 296

    12. Park/headlight on indicator — if equipped this indicator will illuminate when the park lights or headlights are turned on. 13. Seat belt reminder light when the ignition switch is first turned to the on/run position, this light will turn on for four to eight seconds as a bulb check. During the b...

  • Page 297

    The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a...

  • Page 298

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run posi- tion. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Anti-lock brake (abs) light this light monitors the anti-lock brake sy...

  • Page 299

    18. Fuel door reminder the fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. 20. Electronic vehicle information center (evic) white telltale area t...

  • Page 300

    25. Temperature gauge the temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or ...

  • Page 301

    Electronic vehicle information center (evic) the electronic vehicle information center (evic) fea- tures a driver-interactive display that is located in the instrument cluster. The evic consists of the following: • fuel economy • acc: (if equipped) • vehicle speed • trip info • terrain: (if equipped...

  • Page 302

    The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: up button press and release the up button to scroll up- ward through the main menus (fuel economy, vehicle info, tire psi, cruise, messages, units, system setup, vehicle speed, trip in...

  • Page 303

    Back button press the back button to scroll back to a previous menu or sub-menu. Electronic vehicle information center (evic) displays when the appropriate conditions exist, the evic displays the following messages: • vehicle not in park • key left vehicle • key not detected • service tpm system (re...

  • Page 304

    • service blind spot system • blind spot detection unavailable • blind spot system off • blind spot system unavailable sensor blocked • normal cruise ready — when adaptive cruise con- trol (acc) system is turned off and normal (fixed speed) cruise control mode is available. Refer to “adaptive cruise...

  • Page 305

    Momentarily. Refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle” (if equipped). • brake — if the acc system predicts that its maximum braking level is not sufficient to maintain the set distance, this message will flash and a chime will sound while acc continues ...

  • Page 306

    • lights on • key in ignition lights on • ignition or accessory on • ignition or accessory on. Lights on • turn signal on • park assist on • warning object detected • remote start aborted — door ajar • remote start aborted — hood ajar • remote start aborted — l/gate ajar • remote start aborted — fue...

  • Page 307

    • put in park to operate — power liftgate • automatic high beams on • automatic high beams off • service four wheel drive system • eco — fuel saver indicator • terrain settings — automatic • terrain settings — rock • terrain settings — sand/mud • terrain settings — snow • terrain settings — sport • ...

  • Page 308

    • off road ride height level 2 — this message is displayed (for 5 seconds) when the vehicle has achieved the off road height level 2. • vehicle lowered to entry/exit (park) height — this message is displayed (for 5 seconds) when the vehicle has achieved the park height. • entry/exit (park) height in...

  • Page 309

    • air suspension temporarily disabled for jacking and tire change • aerodynamic ride height — this is displayed (for 5 seconds) when the vehicle has achieved the aerody- namic height. Evic white telltale lights this area will show reconfigurable white caution tell- tales. These telltales include: • ...

  • Page 310

    • adaptive cruise control (acc) set this light will turn on when the acc is set. For further information, refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle.” • power steering system over temperature — if equipped if the “power steering system over temp” message ...

  • Page 311

    • air suspension up the air suspension up telltale will illuminate when the air suspension is in use. For further information, refer to “starting and operating”. • air suspension down the air suspension down telltale will illumi- nate when the air suspension is in use. For further information, refer...

  • Page 312

    Evic red telltale lights this area will show reconfigurable red telltales. These telltales include: • door ajar this light will turn on to indicate that one or more doors may be ajar. • liftgate ajar this light will turn on to indicate that liftgate may be ajar. • liftgate flipper glass ajar this li...

  • Page 313

    Vehicle is experiencing a problem with the charging system. Obtain service immediately. See an autho- rized dealer. If jump starting is required, refer to “jump starting procedures” in “what to do in emergencies”. • electronic throttle control (etc) light this light informs you of a problem with the...

  • Page 314

    If the light turns on while driving, safely pull over and stop the vehicle. If the a/c system is on, turn it off. Also, shift the transmission into neutral and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Refer to “if...

  • Page 315

    After a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display ...

  • Page 316

    Fuel economy press and release the up or down button until “fuel economy” displays highlighted in the evic and press the select button. Press and release the up/down buttons until one of the following fuel economy func- tions displays in the evic: • average fuel economy/fuel saver mode • distance to...

  • Page 317

    This feature allows you to monitor when you are driving in a fuel efficient manner, and it can be used to modify driving habits in order to increase fuel economy. Distance to empty (dte) shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is...

  • Page 318

    Displayed in the menu line also. Press and release the select (right arrow) button to display the following information: • if equipped with acc, one of several messages will be displayed giving a dynamic update of the status of the feature as the driver changes feature status or follow- ing conditio...

  • Page 319

    Trip info press and release the up or down button until “trip info” displays highlighted in the evic and press the select button. Press and release the up/down but- tons until one of the following trip functions displays in the evic: • trip a • trip b • elapsed time press the up/down buttons to cycl...

  • Page 320

    Down until the preferred setting is highlighted, then press and release the select button until a check-mark appears next to the setting, showing that the setting has been selected. Vehicle info (customer information features) press and release the up or down button until “vehicle info” displays in ...

  • Page 321

    • tire pressure monitor system (shows the current pres- sure of all four road tires). For additional information, refer to “tire pressure monitor system” in “starting and operating”. Note: • tires heat up during normal driving conditions. Heat will cause the tire pressure to increase from 2 to 6 psi...

  • Page 322

    Note: under certain conditions, the display may be superseded by another display of higher priority. But when the ignition switch position is changed, the display always re-appears. Compass / temperature display the compass readings indicate the direction the vehicle is facing. The evic will display...

  • Page 323

    Note: keep magnetic materials away from the top of the instrument panel, such as ipod’s, mobile phones, laptops and radar detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings. 1. Turn the ignition switch on. 2. ...

  • Page 324

    For the zone where the vehicle is driven, per the zone map. For further information, refer to “compass vari- ance.” 1. Turn on the ignition switch. 2. Press the up or down button until the setup (customer-programmable features) menu is reached, then press the select button. 3. Press the down button ...

  • Page 325

    Italian (italiano), german (deutsch), and dutch (neder- lands). Then, as you continue, the information will dis- play in the selected language. Nav–turn by turn when this feature is selected, the navigation system utilizes voice commands, guiding through the drive route, mile by mile, turn-by-turn u...

  • Page 326

    Unlock all doors 1st press, all doors will unlock no matter which passive entry equipped door handle is grasped. If driver door 1st press is programmed, only the driver’s door will unlock when the driver’s door is grasped. With passive entry, if driver door 1st press is programmed touching the handl...

  • Page 327

    Horn with remote lock when this feature is selected, a short horn sound will occur when the rke transmitter lock button is pressed. This feature may be selected with or without the “flash lamps with lock” feature. To make your selection, press and release the select button until a check-mark ap- pea...

  • Page 328

    Headlamps with wipers (available with automatic headlamps only) when this feature is selected, and the headlight switch is in the auto position, the headlights will turn on ap- proximately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers are turned off if ...

  • Page 329

    Reverse position. The mirrors will move back to their previous position when the transmission is shifted out of reverse. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showi...

  • Page 330

    Release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Refer to “keyless enter-n-go” in “things to know before starting your vehicle”. Auto high beams (available with smartbe...

  • Page 331

    Blind spot alert there are three selections when operating blind spot alert. By pressing and releasing the select button once, the blind spot alert feature can be activated in “blind spot: lights only” mode. When this mode is selected the blind spot monitor (bsm) system is activated and will only sh...

  • Page 332

    For further information, refer to ”adaptive cruise con- trol (acc)” in “understanding the features of your vehicle.” park assist system the rear park assist system will scan for objects behind the vehicle when the transmission is in the reverse position and the vehicle speed is less than 11 mph (18 ...

  • Page 333

    Media center 730n/430/430n (rhr/rer/rbz/ rhb) cd/dvd/hdd/nav — if equipped note: the sales code is located on the lower right side of the unit’s faceplate. Refer to your uconnect™ multimedia rhr, rer, rbz or rhb user’s manual for detailed operating instructions. Operating instructions (voice command...

  • Page 334

    Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume cont...

  • Page 335

    4. Adjust the minutes using the right side tune/ scroll control knob. Press the tune/scroll control knob to save time change. 5. To exit, press any button/knob, or wait five seconds. Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the ...

  • Page 336

    Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Am/fm button press the buttons to select either am or fm mode. Set/rnd button — to set the pushbutton memory when you are receiving a station that you wish to commit to pushbutton memory, press the set/rnd button...

  • Page 337

    Operation instructions — cd mode for cd and mp3 audio play note: • the ignition switch must be in the on or acc position to operate the radio. • this radio is capable of playing compact discs (cd), recordable compact discs (cd-r), rewritable compact discs (cd-rw), compact discs with mp3 tracks and m...

  • Page 338

    Eject button - ejecting a cd press the eject button to eject the cd. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the cd is not removed, the radio will reinsert the cd but will not play it. A disc can be ejected with the radio and ignition off. Note: ...

  • Page 339

    Set/rnd button (random play button) press this button while the cd is playing to activate random play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right seek button to move to the next ran- domly selected track. Press the ...

  • Page 340

    Exceeding 20 folders will result in this display. With 200 files, exceeding 50 folders will result in this display.) • maximum number of characters in file/folder names: • level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • level 2: 31 (including a separator ⬙ . ⬙ and a thre...

  • Page 341

    Mpeg specification sampling fre- quency (khz) bit rate (kbps) mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and album title are supported for version 1 id3 tags. Id3 version 2 is not supported by the radios. P...

  • Page 342

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...

  • Page 343

    Operating instructions — radio mode note: the ignition switch must be in the on/run or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume ...

  • Page 344

    Phone button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further details. If your vehicle is not equipped with or this feature is not available on your vehicle, a ...

  • Page 345

    Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...

  • Page 346

    Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program for...

  • Page 347

    Program type 16-digit character display soft soft soft rock soft rck soft rhythm and blues soft r&b sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected mu...

  • Page 348

    Window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the set/ rnd button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to e...

  • Page 349

    Inserting compact disc(s) gently insert one cd into the cd player with the cd label facing up. The cd will automatically be pulled into the cd player and the cd icon will illuminate on the radio display. If a cd does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and mu...

  • Page 350

    Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding the seek ...

  • Page 351

    Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...

  • Page 352

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 353

    Loading times for playback of mp3 files may be affected by the following: • media - cd-rw media may take longer to load than cd-r media • medium formats - multisession discs may take longer to load than non-multisession discs • number of files and folders - loading times will increase with more file...

  • Page 354

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the aux but...

  • Page 355

    Information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www.Siriuscanada.Ca for canadian residents. Electronic serial number/sirius identification number (esn/sid) please have the following information available when calling: 1. The electronic seria...

  • Page 356

    Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception in the form of short audio mutes. • driving under wide bridges or alon...

  • Page 357

    Additional three seconds will make the radio display the song title all of the time (press and hold again to return to normal display). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next channel in the direction of the arrows. Tune control (rotary) tu...

  • Page 358

    Set button – to set the pushbutton memory when you are receiving a channel that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a butt...

  • Page 359

    This feature allows an ipod 威 or external usb device to be plugged into the usb port, located in the center console or glove compartment. Ipod 威 control supports mini, 4g, photo, nano, 5g ipod 威 and iphone 威 devices. Some ipod 威 software versions may not fully support the ipod 威 control features. Pl...

  • Page 360

    Once the audio device is connected and synchronized to the vehicle’s ipod 威 /usb/mp3 control system (ipod 威 or external usb device may take a few minutes to connect), the audio device starts charging and is ready for use by pressing radio switches, as described below. Note: if the audio device batte...

  • Page 361

    Mode. In play mode, the following buttons on the radio faceplate may be used to control the ipod 威 or external usb device and display data: • use the tune control knob to select the next or previous track. • turning it clockwise (forward) by one click, while playing a track, skips to the next track ...

  • Page 362

    • press the scan button to use ipod 威 /usb/mp3 de- vice scan mode, which will play the first 10 seconds of each track in the current list and then forward to the next song. To stop scan mode and start playing the desired track, when it is playing the track, press the scan button again. During scan m...

  • Page 363

    • during all list modes, the ipod 威 displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backward (counterclockwise) to get to the track faster. • in list mode, the radio preset buttons are used as shortcuts to the following lists on the ipod 威 ...

  • Page 364

    Caution! • leaving the ipod 威 or external usb device (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the device manufactur- er’s guidelines. • placing items on the ipod 威 or external usb device, or connections to the ipod...

  • Page 365

    Selecting different audio device 1. Press phone button to begin. 2. After the ⬙ ready ⬙ prompt and the following beep, say ⬙ setup ⬙ , then ⬙ select audio devices ⬙ . 3. Say the name of the audio device or ask the uconnect™ phone system to list audio devices. Next track use the seek up button, or pr...

  • Page 366

    Uconnect™ multimedia video entertainment system (ves)™ — if equipped getting started • screen located in the overhead console : unfold the overhead lcd screen by pushing the button on the overhead console behind the screen. • with the ignition switch in the on or acc position, turn the radio on by p...

  • Page 367

    Single video screen note: typically there are two different ways to operate the features of the video entertainment system (ves)™. • the remote control • the touch-screen radio (if equipped) play a dvd 1. Press the open/close or load hard-key on the radio faceplate (touch-screen). Or press the load ...

  • Page 368

    Using the remote control 1. Press the mode button on the remote control. 2. While looking at the video screen, highlight disc by either pressing up/down/left/right buttons or by re- peatedly pressing the mode button, then press enter on the remote control. Note: the ves™ system will retain the last ...

  • Page 369

    Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list appears on the right side of the screen, touch the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 so...

  • Page 370

    Channel you want to change, select the new mode from the available list on the right. Modes that are unavailable are greyed-out. Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key and then the view video soft-key. • viewing a d...

  • Page 371

    Play video games connect the video game console to the auxiliary rca input jacks located on the back of the center console. When connecting an external source to the aux input, be sure to follow the standard color coding for the ves™ jacks: note: certain high-end video games, such as playsta- tion3 ...

  • Page 372

    Using the remote control 1. Press the mode button on the remote control. 2. While looking at the video screen, highlight ves aux 1, by either pressing up/down/left/right buttons or by repeatedly pressing the mode button, then press enter on the remote control. Select ves aux1 mode on the ves screen ...

  • Page 373

    Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 or 2 based on the headphone c...

  • Page 374

    Listen to an audio source on channel 2 while a video is playing on channel 1 ensure the remote control and headphone switch is on channel 2. Using the remote control 1. Press the mode button on the remote control and the mode select screen will display, unless a video is playing then only a small ba...

  • Page 375

    Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. To listen to an audio source on channel 2...

  • Page 376

    Important notes for single video screen system • ves™ is able to transmit two channels of stereo audio simultaneously. • in split screen mode the left side equates to channel 1 and right side equates to channel 2. • if a video source is selected on channel 1, then channel 2 is for audio only. Select...

  • Page 377

    Note: • channel/screen 1 select mode information is shown on the left side of the screen. • channel/screen 2 select mode information is shown on the right side of the screen. Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to di...

  • Page 378

    3. Touch the 1 or 2 soft-key based on the channel you want to change and then the disc soft-key in the media column. To exit touch the back arrow at the top left of the screen. Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key...

  • Page 379

    2. Channel selector indicators – when a button is pressed, the currently affected channel or channel button is illuminated momentarily. 3. Light – turns the remote control backlighting on or off. The remote backlighting turns off automatically after five seconds. 4. Channel/screen selector switch - ...

  • Page 380

    Disc in a radio with a multiple-disc changer, prog up selects the next disc and prog down selects the previ- ous disc. 11. Mute – press to mute the headphone audio output for the selected channel. 12. Slow – press to slow playback of a dvd disc. Press play ( 䉴 ) to resume normal play. 13. Status – p...

  • Page 381

    Remote control storage the video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be...

  • Page 382

    Vehicle is not equipped with a dvd player, follow the radio’s instructions to turn video lock on. The radio and the video screen(s) indicate when video lock is active. • pressing the video lock again or turning the ignition off turns video lock off and allows remote control operation of the ves™. Re...

  • Page 383

    Controls the headphone power indicator and controls are located on the right ear cup. Note: the rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video sys...

  • Page 384

    3. If the video screen is displaying a video source (such as a dvd video), pressing status shows the status on a popup banner at the bottom of the screen. Pressing the mode button will advance to the next mode. When the mode is in an audio only source (such as fm), the mode selection menu appears on...

  • Page 385

    How long does the coverage last? This warranty lasts as long as you own the product. What does this warranty cover? Except as specified below, this warranty covers any product that in normal use is defective in workmanship or materials. What does this warranty not cover? This warranty does not cover...

  • Page 386

    If you have any questions or comments regarding your unwired 威 wireless headphones, please phone 1-888-293- 3332 or email customersupport@unwiredtechnology.Com. You may register your unwired 威 wireless headphones online at www.Unwiredtechnology.Com or by phone at 1-888-293-3332. System information s...

  • Page 387

    The ves™ can even control radio modes or video modes while the radio is turned off. The ves™ can access the radio modes or disc modes by navigating to those modes on the ves™ and activating a radio mode or disc mode. Information mode display 1. Channel 1 mode 2. Channel 1 shared status 3. Channel 1 ...

  • Page 388

    5. Channel 2 shared status 6. Channel 2 audio only/mute 7. Channel 1 enter button action 8. Channel 2 enter button action 9. Clock 10. Video lock 11. Not available / error 12. Disc changer status numeric keypad menu when the display for either channel 1 or channel 2 shows direct tune, pressing the r...

  • Page 389

    Screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Press the remote control’s navigation buttons ( 䉱 , 䉲 , 䉴 , 䉳 ) to navigate to the desired digit. 2. When the digit is highlighted, press the remote con- trol’s enter button t...

  • Page 390

    Disc menu when listening to a cd audio or cd data disc, pressing the remote control’s menu button displays a list of all commands which control playback of the disc. Using the options you can activate or cancel scan play and random play. Display settings when watching a video source (dvd video with ...

  • Page 391

    Settings are already set for optimum viewing, so there is no need to change these settings under normal circum- stances. To change the settings, press the remote control’s navi- gation buttons ( 䉱 , 䉲 ) to select an item, then press the remote control’s navigation buttons ( 䉴 , 䉳 ) to change the val...

  • Page 392

    Disc formats the ves™ dvd player is capable of playing the follow- ing types of discs (12 mm or 8 mm diameter): • dvd-video discs (mpeg-2 video compression) (see notes about dvd region codes) • dvd-audio discs (2 channel audio output only) • audio compact discs (cds) • cd data discs with mp3 and wma...

  • Page 393

    If you record a disc using a personal computer, there may be cases where the ves™ dvd player may not be able to play some or the entire disc, even if it is recorded in a compatible format and is playable on other players. To help avoid playback problems, use the following guide- lines when recording...

  • Page 394

    End with the extension ⬙ .Mp3 ⬙ or ⬙ .Mp3 ⬙ and wma files must always end with the extension ⬙ .Wma ⬙ or ⬙ .Wma ⬙ . To prevent incorrect playback, do not use these extensions for any other types of files. • for mp3 files, only version 1 id3 tag data (such as artist name, track title, album, etc.) ar...

  • Page 395

    Player will attempt to continue playing the disc by skipping forward 1.0 to 3.0 seconds at a time. If the end of the disc is reached, the dvd player will return to the beginning of the disc and attempt to play the start of the first track. The dvd player may shut down during extremely hot conditions...

  • Page 396

    All of the language settings have a special ⬙ other ⬙ setting to accommodate languages other than japanese or eng- lish. These languages are selected using a special four- digit code. To enter a new language code, activate the dvd setup menu and follow these additional instructions: • using the remo...

  • Page 397

    Them where lower numbers are designated for all audi- ences and higher numbers are designated for more adult audiences. When a dvd-video disc is loaded, its rating is compared to the setting in the dvd player. If the rating of the disc is higher than the setting in the player, a password screen is d...

  • Page 398

    To set the password, activate the dvd setup menu and follow these additional instructions: • using the remote control left and right cursor but- tons, select the rating tab. • highlight ⬙ change password ⬙ , and then press the remote control’s enter button. • enter the current password. Select a dig...

  • Page 399

    To set the rating, activate the dvd setup menu and follow these additional instructions: • using the remote control’s left and right cursor buttons, select the rating tab. • highlight ⬙ change rating ⬙ , and then press the remote control’s enter button. • enter the current password. Select a digit, ...

  • Page 400

    General information this system complies with part 15 of the fcc operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Steering wheel au...

  • Page 401

    Pressing the center button will make the radio switch between the various modes available (am/fm/sat/ cd/hdd/aux/ves, etc.). The left-hand control is a rocker-type switch with a pushbutton in the center. The function of the left-hand control is different depending on which mode you are in. The follo...

  • Page 402

    Cd/dvd disc maintenance to keep a cd/dvd in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch...

  • Page 403

    Climate controls the air conditioning and heating system is designed to make you comfortable in all types of weather. Dual-zone manual heating and air conditioning the dual-zone manual climate controls allow both driver and front passenger seat occupants to select indi- vidual comfort settings. The ...

  • Page 404

    Temperature controls • driver temperature control rotate this control to regulate the tem- perature of the air inside the passenger compartment for the left front seat occupant. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red ar...

  • Page 405

    Note: the center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear. Bi-level air is directed through the panel and floor outlets. Note: for all settings, except full cold or full hot, there is a difference in temperature b...

  • Page 406

    Conditioning (a/c) button is not pressed. This dehu- midifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. Recirculation control pressing the recirculation control button will put the system in recirculation mode. This can be used when outside con...

  • Page 407

    Note: the air conditioning compressor will not engage until the engine has been running for about 10 seconds. • max a/c for maximum cooling use the a/c and recirculation buttons at the same time. • economy mode if economy mode is desired, press the a/c button to turn off the indicator light and the ...

  • Page 408

    The atc system automatically maintains the interior comfort level desired by the driver and passenger. 1. A/c button press and release to change the current air conditioning (a/c) setting, the indicator illuminates when a/c is on. Performing this function will cause the atc to switch into manual mod...

  • Page 409

    6. Right front seat occupant temperature display this display shows the temperature setting for the right front seat occupant. 7. Front defrost button press and release to change the current setting, the indicator illuminates when on. Performing this function will cause the atc to switch into manual...

  • Page 410

    13. Mode control button press and release to select between modes (panel, bi- level, floor, mix). Performing this function will cause the atc to switch into manual mode. 14. Sync button press and release to control the temperature setting for both zones from the driver temperature control. 15. Drive...

  • Page 411

    To provide you with maximum comfort in the automatic mode, during cold start-ups the blower fan will remain on low until the engine warms up. The blower will increase in speed and transition into auto mode. Manual operation this system offers a full complement of manual override features. Note: each...

  • Page 412

    Bi-level mode air comes from the instrument panel outlets, floor outlets and defrost outlets. Note: in many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor mode air comes from the floor outlets. A slight...

  • Page 413

    Outlets. If economy mode is desired, press the a/c button to turn off the a/c mode in the atc display and deactivate the a/c system. Note: • if the system is in mix, floor or defrost mode, the a/c can be turned off, but the a/c system shall remain active to prevent fogging of the windows. • if fog o...

  • Page 414

    As the temperature gets colder, it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode. Regular clean...

  • Page 415

    Operating tips chart 4 understanding your instrument panel 413.

  • Page 417: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 421 ▫ automatic transmission . . . . . . . . . . . . . . . 421 ▫ keyless enter-n-go . . . . . . . . . . . . . . . . . . . 422 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 423 ▫ extreme cold w...

  • Page 418

    䡵 four-wheel drive operation . . . . . . . . . . . . . 449 ▫ quadra-trac i 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 449 ▫ quadra-trac ii 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 449 ▫ shift positions . . . . . . . . . . . ...

  • Page 419

    䡵 power steering . . . . . . . . . . . . . . . . . . . . . . . 468 ▫ 3.6l engine . . . . . . . . . . . . . . . . . . . . . . . . 468 ▫ 5.7l engine . . . . . . . . . . . . . . . . . . . . . . . . 469 ▫ power steering fluid check . . . . . . . . . . . . . 470 䡵 multi-displacement system (mds) (if equi...

  • Page 420

    䡵 tires — general information . . . . . . . . . . . . . 497 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . 497 ▫ tire inflation pressures . . . . . . . . . . . . . . . . 498 ▫ tire pressures for high speed operation . . . 499 ▫ radial-ply tires . . . . . . . . . . . . . . . . . . . . ...

  • Page 421

    ▫ e-85 usage in non-flex fuel vehicles . . . . . . 520 ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . . 521 ▫ materials added to fuel . . . . . . . . . . . . . . . 521 ▫ fuel system cautions . . . . . . . . . . . . . . . . . 522 ▫ carbon monoxide warnings . . . . . . . . . . . . 523 䡵 flexi...

  • Page 422

    ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . 546 䡵 snow plow . . . . . . . . . . . . . . . . . . . . . . . . . . 547 䡵 recreational towing (behind motorhome, etc.) . . . . . . . . . . . . . . . . . . . . . . 548 ▫ towing this vehicle behind another vehicle . . . . . . . . . . . . . ...

  • Page 423

    Starting procedures before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your ve...

  • Page 424

    Caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle speed. • do not shift from ...

  • Page 425

    Installing and removing the engine start/stop button installing the button 1. Remove the key fob from the ignition switch. 2. Insert the engine start/stop button into the ignition switch with the lettering facing up and readable. 3. Press firmly on the center of the button to secure it into position...

  • Page 426

    To turn off the engine using engine start/stop button 1. Place the shift lever in park, then press and release the engine start/stop button. 2. The ignition switch will return to the off position. 3. If the shift lever is not in park, the engine start/ stop button must be held for two seconds and ve...

  • Page 427

    • press the engine start/stop button a second time to change the ignition switch to the run position (evic displays “ignition mode run”), • press the engine start/stop button a third time to return the ignition switch to the off position (evic displays “ignition mode off”). Extreme cold weather (bel...

  • Page 428

    Warning! (continued) • do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the veh...

  • Page 429

    Caution! To prevent damage to the starter, wait 10 to 15 sec- onds before trying again. After starting the idle speed is controlled automatically and it will decrease as the engine warms up. Engine block heater — if equipped the engine block heater warms the engine, and permits quicker starts in col...

  • Page 430

    Automatic transmission caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle spee...

  • Page 431

    Warning! (continued) • it is dangerous to move the shift lever out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone ...

  • Page 432

    Brake/transmission shift interlock system this vehicle is equipped with a brake transmission shift interlock system (btsi) that holds the shift lever in the park position unless the brakes are applied. To move the shift lever out of the park position, the ignition switch must be turned to the on/run...

  • Page 433

    Gear ranges do not race the engine when shifting from park or neutral into another gear range. Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while vehicle is in motion. Apply the parking brake when leavin...

  • Page 434

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 435

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. On...

  • Page 436

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the lock/off position to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ...

  • Page 437

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 438

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in the current gear until the vehicle is brough...

  • Page 439

    Lever is in the drive position. For example, if you shift the transmission into 3 (third gear), the transmission will never shift above third gear, but will shift down into second and first gear normally. You can switch between drive and ers mode at any vehicle speed. When the shift lever is in the ...

  • Page 440

    Overdrive operation the automatic transmission includes an electronically controlled overdrive (fifth gear). The transmission will automatically shift into the overdrive gear if the follow- ing conditions are present: • the shift lever is in the drive position, • vehicle speed is sufficiently high, ...

  • Page 441

    Gear ranges do not race the engine when shifting from park or neutral into another gear range. Park this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while vehicle is in motion. Apply the parking brake when leavin...

  • Page 442

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 443

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. On...

  • Page 444

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the lock/off position to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ...

  • Page 445

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 446

    These conditions, using a lower gear range will improve performance and extend transmission life by reducing excessive shifting and heat buildup. If the transmission operating temperature exceeds nor- mal operating limits, the powertrain controller will modify the transmission shift schedule and exp...

  • Page 447

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in third gear regardless of which forward gear ...

  • Page 448

    Use of ers (or tow/haul mode) also enables an additional underdrive gear which is not normally used during through-gear accelerations. This additional gear can improve vehicle performance and cooling capability when towing a trailer on certain grades. In ers mode, gears 1 though 3 are underdrive gea...

  • Page 449

    Overdrive operation the automatic transmission includes an electronically controlled overdrive (fourth and fifth gears). The trans- mission will automatically shift into the overdrive gear if the following conditions are present: • the shift lever is in the drive position, • the transmission fluid h...

  • Page 450

    The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pressing the switch a second time restores normal operation. If the tow/haul mode is desired, the switch must be pressed each time the engine is started. Torque converter clutc...

  • Page 451

    Four-wheel drive operation quadra-trac i 姞 operating instructions/ precautions – if equipped the quadra-trac i 威 is a single-speed (hi range only) transfer case, which provides convenient full-time four- wheel drive. No driver interaction is required. The brake traction control (btc) system, which c...

  • Page 452

    When operating your vehicle in 4wd low, the engine speed is approximately three times that of the 4wd hi position at a given road speed. Take care not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and c...

  • Page 453

    Shift positions for additional information on the appropriate use of each transfer case mode position, see the information below: 4wd auto this range is used on surfaces such as ice, snow, gravel, sand, and dry hard pavement. Note: refer to “selec-terrain 威 – if equipped” in “start- ing and operatin...

  • Page 454

    Shifting procedures 4wd hi to 4wd low with the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the on position or the engine running, shift the transmission into neutral, and press the “4wd low” button once on the transfer case switch. The “4wd low” indicator light in the instr...

  • Page 455

    “electronic vehicle information center (evic)” in “un- derstanding your instrument panel” for further informa- tion. 4wd low to 4wd hi with the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the on position or the engine running, shift the transmission into neutral, and press ...

  • Page 456

    4. Hold down the neutral “pin” switch (with a pen, etc.) for four seconds until the led light by the switch starts to blink indicating shift in progress. The light will stop blinking (stay on solid) when the neutral shift is complete. 5. Repeat steps 1 to 4 to shift out of neutral. Note: if shift co...

  • Page 457

    Case and axle coupling differ in design, their operation is similar. Follow the quadra-trac ii 威 transfer case shifting information, preceding this section, for shifting this system. Selec-terrain™ — if equipped description selec-terrain™ combines the capabilities of the vehicle control systems, alo...

  • Page 458

    To allow more driver control of vehicle while maintain- ing safe handling controls. The vehicle will lower (if equipped with air suspension) to aero mode in high range. 4wd low is not available in sport mode, if 4wd low is selected the selec-terrain™ will auto- matically switch back to auto. • snow ...

  • Page 459

    Equipped with air suspension, the vehicle level will change to off-road 2. If the selec-terrain™ switch is in rock mode, and the transfer case is switched from 4wd low to 4wd high, the selec-terrain™ system will return to auto. Electronic vehicle information center (evic) display messages when the a...

  • Page 460

    • normal ride height (nrh) – this is the standard position of the suspension and is meant for normal driving. • off-road 1 (or1) (raises the vehicle approximately 1.3 in (33 mm) – this position should be the default position for all off-road driving until or2 is needed. A smoother and more comfortab...

  • Page 461

    Selec-terrain™ knob is turned to the “sport” posi- tion. Turning the selec-terrain™ knob to the “auto” position will return the system to normal operation. • park mode (lowers the vehicle approximately 1.5 in (38 mm) – this position lowers the vehicle for easier passenger entry and exit as well as l...

  • Page 462

    After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. To assist with changing a spare tire, the quadra-lift™ air suspension system has a feature which allo...

  • Page 463

    Lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the “up” button, the highest flashing indica- tor lamp is the position the system is working to achieve. When lowering, if multiple indicators are flashing on the ⬙ up ⬙ butto...

  • Page 464

    Requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp 4 will remain on solid and indicator lamp 3 will flash as the system waits for the vehicle to reduce speed. If vehicle speed is reduced to, and kept below, 15 mph (24 km/h) indicator lamp 4 will turn off a...

  • Page 465

    Quadra-lift™ – if equipped when off-roading, it is recommended that the lowest useable vehicle height that will clear the current obstacle or terrain be selected. The vehicle height should then be raised as required by the changes in terrain. The selec-terrain™ switch will automatically change the v...

  • Page 466

    Caution! Do not use 4wd low range when operating the vehicle on dry pavement. Driveline hardware dam- age can result. Driving through water although your vehicle is capable of driving through water, there are a number of precautions that must be considered before entering the water. Note: your vehic...

  • Page 467

    And/or the flow rate is reduced. If you must cross flowing water avoid depths in excess of 9 inches (23 cm). The flowing water can erode the streambed, causing your vehicle to sink into deeper water. Determine exit point(s) that are downstream of your entry point to allow for drifting. Standing wate...

  • Page 468

    Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4wd low. Use first gear and 4wd low for very steep hills. If you stall or begin to lose forward motion while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brake...

  • Page 469

    Traction downhill shift the transmission into a low gear, and the transfer case into 4wd low range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction. When descending mountains or hill...

  • Page 470

    Warning! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. You might not have full braking power when you need it to prevent a collision. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary. • if y...

  • Page 471

    To “electronic vehicle information center (evic)” in “understanding your instrument panel” for further in- formation. If the “power steering system over temp” mes- sage and an icon are displayed on the evic screen, it indicates that extreme steering maneuvers may have occurred, which caused an over ...

  • Page 472

    Note: • increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. • upon initial start-up in cold weather, the power steer- ing pump may make noise for a short amount of time. This is due to the co...

  • Page 473

    Caution! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the new vehicle limited warranty. Warning! Fluid level should be checked on a level surface and with the engine off to prevent injury from movi...

  • Page 474

    Park brake, firmly push the park brake pedal fully. To release the parking brake, press the park brake pedal a second time and let your foot up as you feel the brake disengage. When the parking brake is applied with the ignition switch in the on position, the “brake warning light” in the instrument ...

  • Page 475

    Make it difficult to move the shift lever out of park. The parking brake should always be applied whenever the driver is not in the vehicle. Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movemen...

  • Page 476

    Caution! If the “brake warning light” remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. Electronic brake control system your vehicle is equipped with an advanced electronic brake control system tha...

  • Page 477

    Warning! The abs cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The abs cannot prevent collisions, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydropl...

  • Page 478

    Benefit of the system, you must apply continuous brak- ing pressure during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pressure unless braking is no longer desired. Once the brake pedal is released, the bas is deactivated. Warning! The bas cannot prevent the natural l...

  • Page 479

    Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. Erm cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. The capabilit...

  • Page 480

    Light” also flashes when the tcs is active. If the “esc activation/malfunction indicator light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! The electronic...

  • Page 481

    The tcs section, has been disabled and the “esc off indicator light” will be illuminated. All other stability features of esc function normally. This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than esc would nor- mally allow is required...

  • Page 482

    Off” mode is overcome, turn esc back on by momen- tarily pressing the “esc off” switch. This may be done while the vehicle is in motion. 4wd low range partial off this is the normal operating mode for esc in 4wd low range. Whenever the vehicle is started in 4wd low range, or the transfer case (if eq...

  • Page 483

    Hill start assist (hsa) the hsa system is designed to assist the driver when starting a vehicle from a stop on a hill. Hsa will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of the brake pedal. If the driver does not apply th...

  • Page 484

    Warning! • if you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision w...

  • Page 485

    Ready alert braking – if equipped ready alert braking may reduce the time required to reach full braking during emergency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is released by the driver. When the throttle is released very...

  • Page 486

    Hill descent control (hdc) — four-wheel drive models with mp3023 two-speed transfer case only hdc maintains vehicle speed while descending hills during off-road driving situations and is available in 4wd low range only. To enable hdc, press the hdc switch or put the selec-terrain™ system in “rock” m...

  • Page 487

    The hdc speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected. Hdc operation can be overridden with brake application to slow the vehicle down below the hdc control speed. Conversely, if more speed is desired during hdc control,...

  • Page 488

    Warning! Hdc is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed. Esc activation/malfunction indicator light and esc off indicator light the “esc...

  • Page 489

    • the esc system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when esc becomes inactive following the maneuver that caused the esc activation. The “esc off indicator light” indicates the electronic stability control (esc) is off. Tire safety informatio...

  • Page 490

    Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 491

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ ....Blank.... ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t or s = temporary spare tire 31 = overall diameter in inches (in) 21...

  • Page 492

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 493

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 494

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...

  • Page 495

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire and loading information placard this placard tells you important information about the: ...

  • Page 496

    Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the tire and loading informati...

  • Page 497

    Available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in ste...

  • Page 498

    496 starting and operating.

  • Page 499

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 500

    Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...

  • Page 501

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure...

  • Page 502

    Loading may be required for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. Warning! High speed driving with your vehicle at or above maximum load is dangerous. The added strain...

  • Page 503

    Vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equip- ment tire and wheel as a spare, a non-matching tempo- rary emergency use spare may be equipped with your vehicle. Temporary u...

  • Page 504

    Warning! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnin...

  • Page 505

    Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your tire and loading info...

  • Page 506

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...

  • Page 507

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place wit...

  • Page 508

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 509

    Tire chains (traction devices) use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage. • install on rear tires only • due to limited clearance, use sae class “s” low profile cables or traction devices only. Security chain com- pany (sc...

  • Page 510

    Caution! (continued) • do not drive for prolonged period on dry pave- ment. • observe the traction device manufacturer’s in- structions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer’s if it is less than 3...

  • Page 511

    These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on on/off-road type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, qu...

  • Page 512

    The outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour pe...

  • Page 513

    Light will still be on. In this situation, the tire pressure monitoring telltale light will turn off only after the tires have been inflated to the vehicle’s recommended cold tire pressure value. Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures have ...

  • Page 514

    • the tpms is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the tire pressure monitoring telltale light. • seasonal tem...

  • Page 515

    Will automatically update and the tire pressure monitor- ing telltale light will extinguish, once the updated tire pressures have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. The tire pressure monitoring telltale light will...

  • Page 516

    For 75 seconds and then remain on solid. In addition, a “service tpm system” message will be displayed for a minimum of five seconds. For each subsequent ignition switch cycle, a chime will sound, a “service tpm system” message will be displayed for a minimum of five seconds, and the tire pressure m...

  • Page 517

    Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the evic will display a “low tire pressure” me...

  • Page 518

    Once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. Service tpm system warning the tire pressure monitoring telltale light will flash on and off for 75 seconds, and remain on solid when a sys...

  • Page 519

    1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the ve...

  • Page 520

    A ⬙ service tpm system ⬙ message for five seconds and then display dashes (- -) in place of the pressure value. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the spare tire, the tpms will update automatically. In addition, the tire pressure monitoring...

  • Page 521

    5.7l engine this engine is designed to meet all emis- sions regulations and provide satisfactory fuel economy and performance when us- ing high-quality unleaded gasoline having an octane range of 87 to 89. The manufac- turer recommends the use of 89 octane for optimum performance. The use of premium...

  • Page 522

    Gasoline/oxygenate blends some fuel suppliers blend unleaded gasoline with oxy- genates such as ethanol. Fuels blended with oxygenates may be used in your vehicle. Caution! Do not use gasoline containing methanol or gaso- line containing more than 10% ethanol. Use of these blends may result in start...

  • Page 523

    To fix a non-ffv vehicle inadvertently fueled once with e-85 perform the following: • change the engine oil and oil filter • disconnect and reconnect the battery • drain the fuel tank (see your authorized dealer) more extensive repairs will be required for prolonged exposure to e-85 fuel. Mmt in gas...

  • Page 524

    Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gas is prohibited by federal law. Using leaded gasoline can impair engine perfor- mance and damage the emissions control system. • an out-of-tune engine or certain fuel or ignition malfu...

  • Page 525

    Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...

  • Page 526

    The other sections of this manual for information on features that are common between flexible fuel and gasoline-only powered vehicles. Caution! Only vehicles with the e-85 fuel filler door label can operate on e-85. E-85 fuel cap e-85 badge 524 starting and operating.

  • Page 527

    Ethanol fuel (e-85) e-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Warning! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap)...

  • Page 528

    • some additives used in regular gasoline are not fully compatible with e-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as mopar 威 injector cleanup or techron may be used. Selection of engine oil...

  • Page 529

    Replacement parts many components in your flexible fuel vehicle (ffv) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- patible parts. Caution! Replacing fuel system components with non-ethanol compatible components can damage your veh...

  • Page 530

    1. Press the fuel filler door release switch (located under the headlamp switch). 2. Open the fuel filler door, and remove the fuel filler cap. Fuel filler door release switch fuel filler cap 528 starting and operating.

  • Page 531

    Caution! • damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “malfunction indi- cator light (mil)” to illuminate, due to f...

  • Page 532

    • tighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • if the gas cap is not tighten properly, the mil will come on. Be sure the gas cap is tightened every time the vehicle is refueled. Emergency fuel filler door release if ...

  • Page 533

    In “understanding your instrument panel” for further information. Tighten the fuel filler cap properly and press the select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. Vehicle loading certification label as required by natio...

  • Page 534

    Springs, tires, or wheels). Heavier axles or suspension components, sometimes specified by purchasers for in- creased durability, does not necessarily increase the ve- hicle’s gvwr. Tire size the tire size on the label represents the actual tire size on your vehicle. Replacement tires must be equal ...

  • Page 535

    Until the specified weight limitations are met. Store the heavier items down low and be sure that the weight is distributed equally. Stow all loose items securely before driving. Improper weight distributions can have an adverse affect on the way your vehicle steers and handles, and the way the brak...

  • Page 536

    Gross vehicle weight rating (gvwr) the gvwr is the total allowable weight of your vehicle. This includes driver, passengers, cargo and trailer tongue weight. The total load must be limited so that you do not exceed the gvwr. Refer to “vehicle loading/vehicle certification label” in “starting and ope...

  • Page 537

    Rear gawr. Refer to “vehicle loading/vehicle certifica- tion label” in “starting and operating” for further information. Warning! It is important that you do not exceed the maximum front or rear gawr. A dangerous driving condition can result if either rating is exceeded. You could lose control of th...

  • Page 538

    Weight-distributing hitch a weight-distributing hitch system works by applying leverage through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturers’ ...

  • Page 539

    Without weight-distributing hitch (incorrect) with weight-distributing hitch (correct) 5 starting and operating 537.

  • Page 540

    Trailer hitch classification your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional trailer tow prep package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weig...

  • Page 541

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ model model gcwr (gross com- bined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l 4x2 10,4...

  • Page 542

    Trailer and tongue weight always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the gross trailer weight (gtw) on the tow hitch of your vehicle. Loads balanced over the wheels, or heavier in the rear, can cause the trailer to sway severely side-to...

  • Page 543

    Note: remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to “tire safety information/tire and loading information...

  • Page 544

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 545

    Warning! (continued) 2. Gtw 3. Gawr 4. Trailer tongue weight rating for the trailer hitch utilized (this requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing requirements – tires − do not attempt to tow a trailer w...

  • Page 546

    − an electronically-actuated trailer brake controller is required when towing a trailer with electronically- actuated brakes. When towing a trailer equipped with a hydraulic surge-actuated brake system, an electronic brake controller is not required. − trailer brakes are recommended for trailers ove...

  • Page 547

    The trailer tow package includes a seven–pin connector at the rear of the vehicle and a four-pin harness located under the rear bumper. The four-pin harness must be unclipped before use. Use a factory-approved trailer harness and connector. The electrical connections are all complete to the vehicle ...

  • Page 548

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic transmission the drive range can be selected when towing. How- ever, if frequent shifting occurs while in this range, the tow/haul mode (if equipped), or a lower...

  • Page 549

    Of continuous operation. Refer to “maintenance sched- ule” for the proper maintenance intervals. Note: check the transmission fluid level before towing (5.7l engine). Electronic speed control – if equipped − do not use in hilly terrain or with heavy loads. − when using the speed control, if you expe...

  • Page 550

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheel off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • transmission in park • transfer case in neutral (n) • tow in forward direction dol...

  • Page 551

    Recreational towing – two-wheel drive models do not flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for two-wheel drive models) is allowed only if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly...

  • Page 552

    Caution! Towing this vehicle in violation of the above require- ments can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. Recreational towing – quadra–trac ii 姞 /quadra–drive 姞 ii four-wheel drive models the tr...

  • Page 553

    Caution! (continued) • failure to follow these procedures can cause se- vere transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. • do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damage...

  • Page 554

    Caution! It is necessary to follow these steps to be certain that the transfer case is fully in neutral (n) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift the transmission to park. 2. Turn off the engine. 3. For vehicles with keyless...

  • Page 555

    8. After the shift is completed and the neutral (n) light stays on, release the neutral (n) button. 9. Start the engine. 10. Shift the transmission into reverse. 11. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. Turn off the engine. 13. Firmly apply the p...

  • Page 556

    Note: • steps 1 through 6 are requirements that must be met prior to pressing the neutral (n) button, and must continue to be met until the four seconds elapse and the shift has been completed. If any of these require- ments are not met prior to pressing the neutral (n) button or are no longer met d...

  • Page 557

    Note: when shifting out of transfer case neutral (n), turning the engine off may be required to avoid gear clash. 7. After the neutral (n) indicator light turns off, release the neutral (n) button. 8. After the neutral (n) button has been released, the transfer case will shift to the position indica...

  • Page 558

    Note: • steps 1 through 5 are requirements that must be met prior to pressing the neutral (n) button, and must continue to be met until the shift has been completed. If any of these requirements are not met prior to pressing the neutral (n) button or are no longer met during the shift, the neutral (...

  • Page 559: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . 558 䡵 if your engine overheats . . . . . . . . . . . . . . . . 558 䡵 jacking and tire changing . . . . . . . . . . . . . . . 559 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . 560 ▫ spare tire...

  • Page 560

    Hazard warning flashers the hazard warning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. ...

  • Page 561

    Caution! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads hot (h), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on hot (h), and you hear conti...

  • Page 562

    Warning! (continued) • the jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas. Jack location the scissor-type jack and tire changin...

  • Page 563

    Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. Warning! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2. Turn...

  • Page 564

    Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • turn on the hazard warning flasher. • block the ...

  • Page 565

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the whee...

  • Page 566

    Caution! Do not attempt to raise vehicle by jacking on loca- tions other than those indicated in the jacking in- structions for this vehicle. 4. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do n...

  • Page 567

    5. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indi- cated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Front jacking location lift point symbol on sill...

  • Page 568

    6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. Warning! Raising the vehicle higher than necessary can make the vehicle le...

  • Page 569

    Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 9. Lower the vehicle by turning the jack screw counter- clockwise, and remove the jack and wheel block...

  • Page 570

    12. Remove the small center cap and securely store the road wheel in the cargo area. 13. Have the aluminum road wheel and tire repaired as soon as possible, properly secure the spare tire with the special wing nut torqued to 3.7 ft-lbs (5 n·m), reinstall the jack and tool kit foam tray, and latch th...

  • Page 571

    Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Finish tightening t...

  • Page 572

    Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...

  • Page 573

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 574

    Caution! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) j...

  • Page 575

    8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. 10. Reinstall the protective cover over the remote posi- tive (+) bat...

  • Page 576

    Caution! Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- gine to idle with the shift lever in neutral for at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of transmission failure du...

  • Page 577

    Emergency tow hooks — if equipped if your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the vehicle. The rear hook will be located on the driver’s side of the vehicle. Note: for off-road recovery, it is recommended to use both of the front tow hook...

  • Page 578

    4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6. Using the screwdriver or similar tool, press and hold the shift lock lever down. 7. Move the shift lever ...

  • Page 579

    Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance see instructions in “recreational tow- ing” under “starting and operating” • transmission in park • transfer ...

  • Page 580

    If the vehicle’s battery is discharged, refer to “shift lever override” in “what to do in emergencies” for instruc- tions on shifting the automatic transmission out of the park position for towing. Caution! Do not attempt to use sling type equipment when towing. When securing the vehicle to a flat b...

  • Page 581

    15 miles (24 km), tow with the rear wheels off the ground. Acceptable methods are to tow the vehicle on a flatbed, or with the front wheels raised and the rear wheels on a towing dolly, or (when using a suitable steering wheel stabilizer to hold the front wheels in the straight position) with the re...

  • Page 583: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.6l . . . . . . . . . . . . . 583 䡵 engine compartment – 5.7l . . . . . . . . . . . . . . 584 䡵 onboard diagnostic system – obd ii . . . . . . . 585 ▫ loose fuel filler cap message . . . . . . . . . . . 585 䡵 emissions inspection and maintena...

  • Page 584

    ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 602 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 607 ▫ front/rear axle fluid . . . . . . . . . . . . . . . . . 609 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . 610 ▫ automatic transmission . . . . . . . . . ....

  • Page 585

    Engine compartment — 3.6l 1 — totally integrated power module (fuses) 6 — air cleaner filter 2 — engine oil dipstick 7 — washer fluid reservoir 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — power steering fluid reservoir 7 maintain...

  • Page 586

    Engine compartment – 5.7l 1 — totally integrated power module (fuses) 6 — washer fluid reservoir 2 — automatic transmission dipstick 7 — engine oil dipstick 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — air cleaner filter 584 maint...

  • Page 587

    Onboard diagnostic system – obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 588

    The select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Emissions inspection and maintenance programs in some l...

  • Page 589

    4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...

  • Page 590

    Your vehicle. Refer to these service manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! You can be badly injured working on or around a motor vehi...

  • Page 591

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...

  • Page 592

    Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “maintenance schedule” for further information. Note: under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichev...

  • Page 593

    Engine oil viscosity – 3.6l engine sae 5w-30 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil...

  • Page 594

    Materials added to engine oils do not add any supplemental materials, other than leak detection dyes, to your engine oil. Engine oil is an engineered product and its performance may be im- paired by supplemental additives. Disposing of used engine oil and oil filters care should be taken in disposin...

  • Page 595

    Warning! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compa...

  • Page 596

    Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...

  • Page 597

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt condition should also be checked at t...

  • Page 598

    Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency (epa) and is an ozone-saving product. However, the manufacturer recommends that air condi- tioning service be performed by authorized dealers ...

  • Page 599

    Avoid using the wiper blades to wipe frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Note: life expectancy of wiper blades varies depend- ing on geographical area and frequency of use. Poor performance of blades may be...

  • Page 600

    3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade an...

  • Page 601

    Clean the wiper blades, this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Co...

  • Page 602

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 603

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 604

    Cooling system warning! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiat...

  • Page 605

    Cooling system – drain, flush, and refill if the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant ...

  • Page 606

    Caution! (continued) • this vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding coolant your vehicle has been built with an improved engine coolant (antifreeze) that allo...

  • Page 607

    Note: mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes. Cooling system pressure cap the cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that ...

  • Page 608

    Rules for your community. To prevent ingestion by ani- mals and children, do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills...

  • Page 609

    • do not overfill the coolant recovery bottle. • check engine coolant (antifreeze) freeze point in the radiator and in the coolant recovery bottle. If engine coolant (antifreeze) needs to be added, contents of coolant recovery bottle must also be protected against freezing. • if frequent engine cool...

  • Page 610

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 611

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 612

    The front axle fill and drain plugs should be tightened to 22 to 29 ft lbs (30 to 40 n·m). Caution! Do not over tighten the plugs as it could damage them and cause them to leak. Rear axle fluid level check the rear axle oil level needs to be between 1/8 in (3 mm) below the bottom of the fill hole an...

  • Page 613

    Adding fluid add fluid at the filler hole, until it runs out of the hole, when the vehicle is in a level position. Drain first remove fill plug, then remove drain plug. Recom- mended tightening torque for drain and fill plugs is 15 to 25 ft lbs (20 to 34 n·m). Caution! When installing plugs, do not ...

  • Page 614

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes....

  • Page 615

    Caution! • using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter chan...

  • Page 616

    6. Remove the dipstick again, and note the fluid level on both sides. The fluid level should be between the “hot” (upper) reference holes on the dipstick at normal operat- ing temperature. The fluid level is only valid if there is a solid coating of oil on both sides of the dipstick. If the fluid is...

  • Page 617

    Passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What cau...

  • Page 618

    Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty...

  • Page 619

    Wheel and wheel trim care • all wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • to remove heavy soil and/or excessive brake dust, use mopar 威 wheel cleaner or equivalent or select a non-abrasive, non-...

  • Page 620

    Interior care use mopar 威 total clean or equivalent to clean fabric upholstery and carpeting. Interior trim should be cleaned starting with a damp cloth, a damp cloth with mopar 威 total clean or equiva- lent, then mopar 威 spot & stain remover or equivalent, if absolutely necessary. Do not use harsh ...

  • Page 621

    To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Gl...

  • Page 622

    Replace the belts if they appear frayed or worn or if the buckles do not work properly. Fuses totally integrated power module the totally integrated power module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and compo- nent may ...

  • Page 623

    Cavity cartridge fuse mini fuse description j03 30 amp pink trailer tow j04 25 amp natural driver door node j05 25 amp natural passenger door node j06 40 amp green antilock brakes pump/stability control system j07 30 amp pink antilock brakes valve/stability control system j08 40 amp green power seat...

  • Page 624

    Cavity cartridge fuse mini fuse description j18 20 amp blue powertrain control module/powertrain control module transmission range j19 60 amp yellow radiator fan motor hi/radiator fan motor low j20 30 amp pink front wiper j21 20 amp blue front/rear washer control j22 25 amp natural sunroof module m1...

  • Page 625

    Cavity cartridge fuse mini fuse description m10 15 amp blue video/universal garage door opener m11 10 amp red heating, ventilation & air conditioning (climate control system) m12 30 amp green radio/amplifier m13 20 amp yellow instrument cluster m14 20 amp yellow back up camera – if equipped cavity c...

  • Page 626

    Cavity cartridge fuse mini fuse description m20 15 amp blue instrument cluster m21 20 amp yellow automatic shut- down 3 m22 10 amp red horns (low/high) – right m23 10 amp red horns (low/high) – left m24 25 amp natural rear wiper m25 20 amp yellow fuel pump motor output/diesel lift pump (export only)...

  • Page 627

    Cavity cartridge fuse mini fuse description m33 10 amp red powertrain controller/ transmission con- troller m34 10 amp red park assist module/climate control system module/infra red sensor/compass module m35 15 amp blue left rear parklamps m36 20 amp yellow power outlet m37 10 amp red antilock brake...

  • Page 628

    Caution! (continued) • when replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system over- load. If a properly rated fuse continues to blow, it indicates a problem i...

  • Page 629

    Exterior lights bulb type aux aperature backup lamps . . . . . . . . 7440 (w21w) auxiliary liftgate tail lamps . . . . . . . . . . . . . . W3w front park/turn lamp . . . . . . . . . . . . . . . . . 7444na front fog lamps . . . . . . . . . . . . . . . . . . . . . Psx24w front side marker . . . . . . ...

  • Page 630

    Note: on vehicles equipped with high intensity dis- charge (hid) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- ishes and becomes more white after approximately 10 seconds, as the system charges. Halogen headlamps – if equipped 1. Open the hood. 2. Turn th...

  • Page 631

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front fog lamps 1. Reach through the cutout in the splash shield and disconnect the wiring harness from th...

  • Page 632

    6. Firmly and evenly push the bulb straight into the lamp housing until both tabs snap firmly into place and are fully engaged. 7. Connect the wiring harness to the front fog lamp connector. Rear tail, stop, turn signal, and backup lamps 1. Raise the liftgate. 2. Remove the two push-pins from the ta...

  • Page 633

    Rear liftgate mounted tail lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pull up glass seal at bottom of window opening. 6. Remove small trim panel ar...

  • Page 634

    Center high-mounted stop lamp (chmsl) the center high-mounted stop lamp is an led assembly. See your authorized dealer for replacement. Rear license lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4...

  • Page 635

    Fluid capacities u.S. Metric fuel (approximate) all engines 24.6 gallons 93 liters engine oil with filter 3.6l engine (sae 5w-30, api certified) 6 quarts 5.6 liters 5.7l engine (sae 5w-20, api certified) 7 quarts 6.6 liters cooling system * 3.6l engine (mopar 威 engine coolant/antifreeze 5-year/100,0...

  • Page 636

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil – 3.6l engine use api certified sae 5w-30 engine oil, meeting the requi...

  • Page 637

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4 威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case – 3.6l engine shell automatic transmission fluid 3353 or equivalent. Transfer case – 5.7l engine mopar 威 atf+4 威 automatic tra...

  • Page 638

    Component fluid, lubricant, or genuine part power steering reservoir – 3.6l engine mopar 威 hydraulic fluid or equivalent meeting ms-11655, such as fuchs eg zh 3044 or pentosin chf 11s. Power steering reservoir – 5.7l engine mopar 威 power steering fluid +4, mopar 威 atf+4 威 automatic trans- mission fl...

  • Page 639: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 638 ▫ required maintenance intervals . . . . . . . . . . 639 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 640

    Maintenance schedule the scheduled maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating condition...

  • Page 641

    Referring to the steps described under “electronic vehicle information center (evic)/oil change required” in “understanding your instrument panel” for further in- formation. At each stop for fuel • check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oi...

  • Page 642

    8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer reading date repair order # dealer code signature, authorized ser...

  • Page 643

    24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the front ...

  • Page 644

    40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 645

    56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 646

    64,000 miles (104,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...

  • Page 647

    72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fron...

  • Page 648

    88,000 miles (143,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer reading date repair order # dealer code signature, authorize...

  • Page 649

    96,000 miles (156,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...

  • Page 650

    104,000 miles (169,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ flush and replace the engine coolant at 104,000 miles (169,000 km...

  • Page 651

    120,000 miles (195,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fr...

  • Page 652

    128,000 miles (208,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditio...

  • Page 653

    144,000 miles (234,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ if using your vehicle for any of the following: dusty or off-roa...

  • Page 654

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • failure to properly inspect and mai...

  • Page 655: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655 ▫ prepare for the appointment . . . . . . . . . . . 655 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 655 ▫ be reasonable with r...

  • Page 656

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 661 ▫ temperature grades . . . . . . . . . . . . . . . . . . 66...

  • Page 657

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 658

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 659

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 660

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 661

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 662

    Vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • diagnostic procedure manuals diagnostic procedure manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and techn...

  • Page 663

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 664

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 665: Index

    Index 10

  • Page 666

    Adaptive cruise control (acc) (cruise control) . . 205 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 527 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . 521 air cleaner, engine (engine air cleaner filter) . . . 592 air conditioner maintenance . . . . . . . . . ....

  • Page 667

    Fluid level check . . . . . . . . . . . . . . . . . 612,613 fluid type . . . . . . . . . . . . . . . . . . . . . . . . . 611 special additives . . . . . . . . . . . . . . . . . . . . . 612 autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . 436,445 auxiliary electrical outlet (power outl...

  • Page 668

    Cargo area features . . . . . . . . . . . . . . . . . . . . . . 272 cargo compartment . . . . . . . . . . . . . . . . . . . . . . 272 light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 cargo tie-downs . . . . . ...

  • Page 669

    Coolant capacity . . . . . . . . . . . . . . . . . . . . . 633 coolant level . . . . . . . . . . . . . . . . . . . . . . . 606 disposal of used coolant . . . . . . . . . . . . . . . 605 drain, flush, and refill . . . . . . . . . . . . . . . . 603 inspection . . . . . . . . . . . . . . . . . . . . . ...

  • Page 670

    Electronic brake control system . . . . . . . . . . . . . 474 anti-lock brake system . . . . . . . . . . . . . . . . 474 brake assist system . . . . . . . . . . . . . . . . . . . 475 electronic roll mitigation . . . . . . . . . . . . . . . 476 traction control system . . . . . . . . . . . . . . . . ...

  • Page 671

    Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 temperature gauge . . . . . . . . . . . . . . . . . . . 298 engine oil viscosity . . . . . . . . . . . . . . . . . . . . . . 591 engine oil viscosity chart . . . . . . . . . . . . . . . . . 591 enhanced accident response feature . . ...

  • Page 672

    Fluids, lubricants and genuine parts . . . . . . . . . . 634 fog light service . . . . . . . . . . . . . . . . . . . . . . . . 629 fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . 291,629 folding rear seat . . . . . . . . . . . . . . . . . . . . . . . . 173 forward collision warning . ...

  • Page 673

    Gauges coolant temperature . . . . . . . . . . . . . . . . . . 298 fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 speedometer . . . . . . . . . . . . . . . . . . . . . . . . 296 tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 289 gear ranges . . . . . . . . . . . ....

  • Page 674

    Infant restraint . . . . . . . . . . . . . . . . . . . . . . . . . . 83 inflation pressure tires . . . . . . . . . . . . . . . . . . . . 498 information center, vehicle . . . . . . . . . . . . . . . . . 299 inside rearview mirror . . . . . . . . . . . . . . . . . . . 109 instrument cluster . . . . ....

  • Page 675

    Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100,182 airbag . . . . . . . . . . . . . . . . . . . . . . 76,81,98,289 anti-lock . . . . . . . . . . . . . . . . . . . . . . . . . . 296 automatic headlights . . . . . . . . . . . . . . . . . 183 back-up . . . . . . . . . . . . . . . ...

  • Page 676

    Turn signal . . . . . . . . . . . . . . . . 100,182,628,630 vanity mirror . . . . . . . . . . . . . . . . . . . . . . . 113 loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 531 tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493 locks . . . . . . . . . . . . . . . ...

  • Page 677

    Multi-displacement engine system . . . . . . . . . . . 471 multi-function control lever . . . . . . . . . . . . . . . 182 new vehicle break-in period . . . . . . . . . . . . . . . . 95 occupant restraints . . . . . . . . . . . . . . . . . . . 50,74,79 occupant restraints (sedan) . . . . . . . . . . ...

  • Page 678

    Park sense system, rear . . . . . . . . . . . . . . . . . . . 233 parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . 471 personal settings . . . . . . . . . . . . . . . . . . . . . . . . 322 pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 pets, transporting...

  • Page 679

    Rear park sense system . . . . . . . . . . . . . . . . . . . 233 rear seat, folding . . . . . . . . . . . . . . . . . . . . . . . 173 rear window defroster . . . . . . . . . . . . . . . . . . . 279 rear window features . . . . . . . . . . . . . . . . . . . . 278 rear wiper/washer . . . . . . . . . ....

  • Page 680

    Seat belt reminder . . . . . . . . . . . . . . . . . . . . . . . 66 seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53,98 adjustable upper shoulder anchorage . . . . . . 59 and pregnant women . . . . . . . . . . . . . . . . . . 67 child restraint . . . . . . . . . . . . . . . . . ...

  • Page 681

    Shoulder belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 side airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 signals, turn . . . . . . . . . . . . . . . . . . . 100,291,628,630 smartbeams . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 snow chains (tire ...

  • Page 682

    Synthetic engine oil . . . . . . . . . . . . . . . . . . . . . . 591 system, remote starting . . . . . . . . . . . . . . . . . . . . 29 tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 telescoping steering column . . . . . . . . . . . . . 198,199 temperature control, automatic ...

  • Page 683

    Tow hooks, emergency . . . . . . . . . . . . . . . . . . . 575 tow/haul indicator light . . . . . . . . . . . . . . . . . 291 towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533,576 24-hour towing assistance . . . . . . . . . . . . . 128 disabled vehicle . . . . . . . . . . . . . . . ...

  • Page 684

    Universal transmitter . . . . . . . . . . . . . . . . . . . . . 246 untwisting procedure, seat belt . . . . . . . . . . . . . . 58 upholstery care . . . . . . . . . . . . . . . . . . . . . . . . 618 vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 113 variance, compass . . . . . . ...

  • Page 685

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be obser...

  • Page 686

    Chrysler group llc 12wk741-126-ac 3rd edition printed in u.S.A..