Kalamazoo K1000HB Use And Care Manual - page 29
1.800.868.1699
25
J
K
Main burners are secured
to the burner brackets with
removeable pins accessed
below each bracket.
L
M
N
O
J.
Main Burners: These cast brass burners provide the primary heat
for the grill. Located below the Hybrid Fire Grilling Drawer, they
can also be used to start a charcoal and/or wood fire. The main
burners do not have their own individual ignition points. The main
burners are started by the ignition burner that runs across the front
of the grill.
K.
Ignition Burner (not visible in drawing): Crosses the front of all
main burners. The flame from the ignition burner lights the main
burners of the grill.
L.
Ignition Burner Flash Tube: This tube is engineered to protect
the electronic ignition coil and provide for convenient manual
ignition. Open the Hybrid Fire Grilling Drawer a few inches to
access the flash tube.
M.
Ignition Burner Ignition Coil: The coil inside the flash tube glows
hot to ignite the ignition burner gas that collects in the ignition
burner flash tube. You can see the glow of the coil from the
front of the flash tube. Never touch the coil or other parts of the
ignition probe or you may damage the ignition system.
N.
Main Control Panel: See the following section on grill controls.
O.
Access Doors: The cabinet below the grill is not for storage. This space contains the cleanout pan and
the electrical system for the grill. Never store combustible materials inside this cabinet or any items that
may be damaged by heat. The rotisserie spit and forks may be stored inside the cabinet. Never attempt to
store a LP cylinder underneath the grill.
FIGURE 11
FIGURE 12