Summary of SW-HDMX44CE
Page 1
Sw-hdmx44ce 4x4 hdmi® matrix switcher all rights reserved mpn: sw-hdmx44ce.
Page 2: Contents
Contents statement ..................................................................................................................................................................................................... 1 safety warning .....................................................................
Page 3
Sw-hdmx44ce 1 statement read this user manual carefully before using the product. Pictures shown in this manual are for reference only, different models and specifications are subject to real product. This manual is only for operation instruction only, not for any maintenance usage. The functions de...
Page 4
Sw-hdmx44ce 2 introduction the kanexpro sw-hdmx44ce is a simple and cost-effective 4k based hdmi matrix designed with 4- inputs and 4-outputs. For swift switching and routing of any hdmi sources such as laptops, blu-ray players, and 4k based apple tv to any four displays. This matrix switcher is hdc...
Page 5
Sw-hdmx44ce 3 panel description front panel no. Name description ① firmware micro usb port for performing firmware updates. ② power led the led illuminates green when power is applied. ③ input leds a series of four leds, one of which illuminates blue to indicate which source is selected. ④ output pr...
Page 6
Sw-hdmx44ce 4 system diagram usage precaution: verify all components and accessories included before installation. System should be installed in a clean environment with proper temperature and humidity. All of the power switches, plugs, sockets and power cords should be insulated and safe. All devic...
Page 7
Sw-hdmx44ce 5 front panel control repeatedly press the output button to cycle through the various inputs for the corresponding output. Ir remote control press the standby (1) button to enter or exit standby mode. To switch the selected input for one or more of the outputs, first press the number cor...
Page 8
Sw-hdmx44ce 6 rs232 control if the hdmi matrix need to be control from pc using an rs232 connection, the third party rs232 control software package, such as commwatch.Exe, whose installation and usage is described below. Installation: copy the control software file to the computer connected with the...
Page 9
Sw-hdmx44ce 7 rs232 commands communication protocol: rs232 communication protocol baud rate: 9600 data bit: 8 stop bit: 1 parity bit: none system command command description command example and response /*type; report system model. /*type; ce-mx44 /%lock; lock front panel buttons. /%lock; system loc...
Page 10
Sw-hdmx44ce 8 command description command example and response all open. [x]v[y1], [y2],[y3],[y4]. Switch input [x] to outputs [y]. X=1~4, y=1~4. 1v1,2,3,4. Av:01->01,02,03,04 status[x]. Report the input channel on output [x] status1. Av: 01->01 status. Report the input channel on output channel one...
Page 11
Sw-hdmx44ce 9 edid management command description command example and response edidpcm[x]. Set the audio format of input [x] to pcm. X=1~ 4. Edidpcm1. Edidpcm1 edidg[x]. Get the edid data from output [x]. X=1~ 4. Edidg1. Edidminit. Reset factory default edid to all input ports. Edidminit. Edidminit....
Page 12
Sw-hdmx44ce 10 troubleshooting q1: there is no video present on one of the displays. A1: check the cable connections. Try replacing the hdmi cable with a known good one. Verify that the link led is illuminated. Q2. One of the displays has no video when one of the inputs is selected. A2: verify that ...
Page 13
Sw-hdmx44ce 11 specification video input input (4) hdmi input connector (4) female type a hdmi hdmi version 1.4 hdcp version 2.2 video output output (4) hdmi output connector (4) female type a hdmi hdmi version 1.4 hdcp version 1.4 general maximum video resolution 4k@60hz 4:2:0 maximum bandwidth 10....
Page 16
Brea, california www.Kanexpro.Com.