KanexPro SW-HDMX44CE User Manual - page 7
SW-HDMX44CE
5
Front Panel Control
Repeatedly press the OUTPUT button to cycle through the various inputs for the corresponding output.
IR Remote Control
Press the STANDBY (1) button to enter or exit Standby mode.
To switch the selected input for one or more of the outputs, first
press the number corresponding to the desired INPUT (2), then
press one or more OUTPUTS (3) or the ALL (4) button, then press
the ENTER (4) button to execute the change.
Examples:
To send input 3 to output 2, first press the INPUTS 3 button,
then press the OUTPUTS 2 button, and finally press the ENTER
button to execute the change.
To send input 1 to outputs 1 and 4, first press the INPUTS 1
button, then press both the OUTPUTS 1 and 4 buttons, and
finally press the ENTER button to execute the change.
To send input 4 to all outputs, first press the INPUTS 4 button,
then press the ALL button, and finally press the ENTER button
to execute the change.
To set the EDID for one or more source devices to the EDID
capabilities of a specific output, press the EDID (4) button, then
press the desired INPUTS (2) or the ALL (4) button, then press the
OUTPUTS (3) button corresponding to the desired display, finally
press the ENTER (4) button to execute the operation.