KanexPro SW-HDMX44CE User Manual - page 8
SW-HDMX44CE
6
RS232 Control
If the HDMI matrix need to be control from PC using an RS232 connection, the third party RS232 control
software package, such as CommWatch.exe, whose installation and usage is described below.
Installation: Copy the control software file to the computer connected with the matrix.
Uninstallation: Delete all the control software files in corresponding file path.
Basic Settings:
First to connect the matrix with all input devices and output devices needed, then to connect it with a
computer which is installed with RS232 control software.
Double-click the software icon to run this software. Here we take the software CommWatch.exe as
example. The icon is showed as below:
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and
then you are able to send command in Command Sending Area.
Parameter Configuration area
Monitoring area, indicates if the
command sent works.
Command Sending area