KanexPro SW-HDMX44CE User Manual - page 11
SW-HDMX44CE
9
EDID Management
Command
Description
Command Example and
Response
EDIDPCM[x].
Set the audio format of input [x] to PCM. x=1~
4.
EDIDPCM1.
EDIDPCM1
EDIDG[x].
Get the EDID data from output [x]. x=1~ 4.
EDIDG1.
EDIDMInit.
Reset factory default EDID to all input ports.
EDIDMInit.
EDIDMInit.
EDIDM[x]B[y].
Set the EDID data of output [x] to input [y]. If
the EDID data is not available, the matrix will
set it to initial EDID data.
EDIDM2B1.
EDIDM2B1.
EDIDH[x]B[y].
Set the EDID data of output [x] to input [y].If
the EDID data is available and the audio part
supports not only PCM format, then force-set
it to only support PCM. If the EDID data is not
available, it will set to initial EDID.
EDIDH2B1.
EDIDH2B1
EDIDUpgrade[
x].
Upgrade the EDID data of the input port [x].
When the command applied, system prompts
to upload the EDID file (.bin). Operation will be
cancelled in 10 seconds
EDIDUpgrade1.
Please send the EDID file
!EDID Upgrade OK!
GetInPortEDID
[x].
Get the EDID of input [x]. x=1~ 4.
GetInPortEDID1.
HDCP Compliance
Command
Description
Command Example and
Response
/%[y]/[x]:[z].
HDCP management.
y=O is for output port;
x=1~4 is the number of the output port, if the
x=ALL, it means all ports;
z=1/0 is for HDCP compliant status, the value
may be 1 (HDCP compliant) or 0 (not HDCP
compliant).
/%O/ALL:0.
/%O/ALL:0.
%0801.
Auto HDCP management mode.
%0801.
%0801
%9973.
Get the HDCP status of input ports.
%9973.
In 01 02 03 04
HDCP Y Y Y Y
%9974.
Get the HDCP status of output ports.
%9974.
Out 01 02 03 04
HDCP Y Y Y Y
%9978.
Reports the HDCP compliance status of the
inputs.
%9978.
In 01 02 03 04
HDCPEN Y Y Y Y