Kangaroo Hillcrest ABX Manual - Power Controls and Operation

Controls and 

o

pera

tions 

18

Power Controls and Operation

Accelerator

Speed is controlled by the Accelerator located between the handle grips. The decal indicates speed in relation to 

the Accelerator position. 

(Figure 8)

Note: Turning the Accelerator all the way down does not turn off Power Controls, even if your X-Series is not moving. 

There is a feature, known in technical terms as “ramp up”, that automatically provides a gentle start at any setting 

up to, and including, full speed. Even so, your X-Series is very powerful, and it is best to start out at lower speeds.

Function Switch

The Function Switch is located on the top center of the handle.

 (Figure 9)

•  Switch to the 

MANUAl mode when remote control is not desired. 

•  Switch to 

REMOTE mode when you are ready to resume play with Remote Guidance.