Kangaroo Hillcrest ABX Manual - Maintenance
Maintenance
Don’t Oil it!
Your X-Series has been designed and manufactured to be essentially maintenance free. Do not open or attempt to
service the transaxle gear train. It is tuned at the factory to minimize gear noise. It also contains a special lubricant,
which is sealed inside by a gasket. The control system is well designed, with quality parts and full protection
circuitry. There are no user serviceable components.
Keep it Clean!
The only type of maintenance required for your X-Series is cosmetic. Use soap or mild detergent and water, then
rinse with clean water. You
MUST avoid getting water in the control plugs. Your X-Series can dry in the sun, but the
stainless steel tubing should be wiped dry for the best luster. Never use an abrasive cleaner.
Stainless Steel Components & Tires
It is a good idea to use a quality automotive wax on the stainless steel to prevent fingerprints and smudges from
showing up. The X-Series’ polyurethane tires are made of a compound unaffected by conditions that deteriorate
ordinary rubber. You may use a cleaner/preservative such as Armorall®, or a similar product, to keep tires looking
like new.
Normal Wear & Tear
The handle grips and the Upper and Lower Black Bag Protectors may deteriorate with use. This is normal wear and
tear and is not covered by warranty.