Karassn KS-258B User Manual - page 14
8-zone Telephone Alarm System
- 11-
83# to register the third detector in the eighth zone
(The first bit stands for zone number, and the latter bit stands for the number
of detectors in this zone, and “#” means to confirm.)
Example 1: Registering a PIR detector in the third zone, and register a
wireless door sensor in the fourth zone.
* Register PIR detector in the first one of the third zone, so the code is 31.
* Register wireless door sensor in the first one of the fourth zone, so the
code is 41.
In manager's program state, enter 31#, and the indicator light in the third
zone is flashing, and then trigger the PIR detector to send signal, it will make
four short “Di” sound, which means the setting is successful, then the indicator
light in the third zone will be off. Then enter 41#, and the indicator light in the
fourth zone is flashing, and then separates the sensor part with the magnetic
part, it will make four short “Di” sound, which means the setting is successful,
then the indicator light in the fourth zone will be off.
Note: If it learns other wrong signals, please delete it according to the 6.3
chapters, and then learn code again.
<3>How To Delete Detector
11## to delete the first detector in the first zone
12## to delete the second detector in the second zone
13# #to delete the third detector in the third zone
………………………………………………..
81# #to delete the first detector in the eighth zone
82# #to delete the second detector in the eighth zone
83# #to delete the third detector in the eighth zone
04# to delete all detectors
Example 1: Delete the third detector in the fifth zone
In manager's program state, enter 53#, then the indicator light in the fifth
zone is flashing, and then press a“#”, and all indicator lights will be off one
by one, then it will make four short “Di” sound, which means the setting is
successful.
Example 2: Delete All Detectors
In manager's programming state, enter 04#, and all indicator lights will
be off one by one, then it will make four short “Di” sound, which means the
setting is successful.
<4>How To Display Registered Zones
19#
Instruction:
A. If the indicator light is on, which means some detector has been learned
in this zone, and if the indicator light is off, which means no detector has
been learned in this zone.
B. A zone can be learned up to three detectors, that is to say; the indicator