Karassn KS-258B User Manual - page 15
8-zone Telephone Alarm System
- 12-
light will be on as long as one detector has been learned in this zone.
C. This directive only used to display the indicator lights, and it won't
modify any settings.
Example 1: Learn one detector in the first zone, learn 2 detectors in the
second zone, learn 3 detectors in the third zone, and don't learn any detectors
in the other zones.
In manager's programming state, enter 19#, and then the indicator lights
of 1, 2, 3 zones on main unit will be on, and other indicator lights on main unit
will be off. If you want to exit displaying state, only enter a “#”, then it will
make four short “Di” sound, which means the setting is successful.
<5>How To Register Remote Controller
91# to register the first remote controller
……………………………………….
98# to register the eighth remote controller
(The first bit should be 9, and the second bit stands for the number of
remote controller)
Example 1: Register two remote controller separately to be the number
one and number three.
In manager's program state, enter 91#, and the indicator light of the first
zone is flashing, then press “Disarm”key on remote controller, it will make
four short “Di” sound, which means the setting is successful, then the indicator
light of the first zone will be off. Then enter 93#, and the indicator light of the
third zone is flashing, and then press “Disarm” key on remote controller, it
will make four short “Di” sound, which means the setting is successful, then
the indicator light of this zone will be off.
<6>How To Delete Remote Controller
91## to delete the first remote controller
………………………………………..
98## to delete the eighth remote controller
03# to delete all remote controllers at one time
Example 1: Delete the third remote controller
In manager's program state, enter 93#, and the indicator light of the third
zone is flashing, then press a “#”, all indicator lights will be off one by one,
then it will makes four short “Di” sound, which means the setting is successful.
Example 2: Delete all remote controllers
In manager's program state, enter 03#, and all indicator lights will be off
one by one, then it will make four short “Di” sound, which means the setting
is successful.
<7>How To Display Registered Remote Controller
99# Zone Number (Indicator light which you want to display)#
Instruction:
1.If the indicator light is on, which means the remote controller has been