Summary of B 40 C Bp

  • Page 1

    Register and win! Www .Kaercher .Com b 40 c bp b 40 w bp 59641620 08/13.

  • Page 2

    2.

  • Page 3

    - 1 please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. Before using the appliance for the first time, read and observe these operating instruc- tions and the accompanying brochure: safety infor...

  • Page 4

    - 2 1 vacuum bar lowering lever 2 cover dirt water reservoir 3 holding rail for home base 4 fluff filter 5 wastewater reservoir rinsing system (option) 6 flexible lock of rinsing system (option) 7 lock of wastewater reservoir 8 float 9 push handle 10 coarse dirt sieve 11 dirt water reservoir 12 fres...

  • Page 5

    - 3 1 rotating button for drive speed (b 40 w only) 2 intelligent key yellow - operator grey - supervisor 3 display 4 program selection switch 5 info button 1 off device is switched off 2 transport mode (b 40 w only) driving to the place of use. 3 eco mode wet clean the floor (with reduced brush spe...

  • Page 6

    - 4 insert the suction hose. Danger risk of injury. Pull the intelligent key to take all functions out of operation immediately. Insert batteries and connect (see "be- fore start-up"). Place long lateral boards of the packag- ing as a ramp next to the pallet. Fix the ramp on the pallet with nails. P...

  • Page 7

    - 5 parameters for the different cleaning pro- grammes are preset in the appliance. Depending on the authorisation of the yel- low intelligent key, individual parameters can be changed. If you wish to permanently change the parame- ters, you must use a grey intelligent key. This adjustment procedure...

  • Page 8

    - 6 after all desired parameters have been modified, turn the info button until "exit menu" is displayed. Press the info button - you will exit the menu. Press info button - the set value blinks. Set the desired language by turning the info button. Confirm the changed setting by press- ing the info ...

  • Page 9

    - 7 1 wear indicator 2 vacuum lip the vacuum lips must be replaced or re- versed if they are worn down to the wear in- dicator. Remove the vacuum bar. Unscrew the star grips. Remove the plastic parts. Remove the vacuum lips. Insert new or reversed vacuum lips. Insert the plastic parts. Screw in and ...

  • Page 10

    - 8 danger danger of explosion. Do not put tools or similar on the battery, i.E. On the terminal poles and cell connectors. Risk of injury. Ensure that wounds never come into contact with lead. Always clean your hands after having worked with batteries. * appliance requires 2 batteries 1) complete s...

  • Page 11

    - 9 danger risk of injury! Before working on the appli- ance, remove the intelligent key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. If the display shows different error messag- es or if the error cannot be remediated: remove the intelligent k...

  • Page 12

    - 10 accessory b 40 br appliance b 40 (brush roller accessories) description part no.: working width 450 mm part no.: working width 550 mm description packaging unit appliance requires brush roller, red (medium, stand- ard) 4.762-392.0 4.762-393.0 also for regular cleaning of heavily dirtied floors....

  • Page 13

    - 11 we hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the eu directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is m...

  • Page 16

    Http://www.Kaercher.Com/dealersearch.