Register and win! Www .Kaercher .Com b 40 c bp b 40 w bp 59641620 09/14.
2.
- 1 please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. Before using the appliance for the first time, read and observe these operating instruc- tions and the accompanying brochure: safety infor...
- 2 1 vacuum bar lowering lever 2 cover dirt water reservoir 3 holding rail for home base 4 fluff filter 5 wastewater reservoir rinsing system (option) 6 flexible lock of rinsing system (option) 7 lock of wastewater reservoir 8 float 9 push handle 10 coarse dirt sieve 11 dirt water reservoir 12 fres...
- 3 1 rotating button for drive speed (b 40 w only) 2 intelligent key yellow - operator grey - supervisor 3 display 4 program selection switch 5 info button 1 off device is switched off 2 transport mode (b 40 w only) driving to the place of use. 3 eco mode wet clean the floor (with reduced brush spe...
- 4 insert the vacuum bar into the vacuum bar suspension in such a manner that the profiled sheet is positioned above the suspension. Tighten the wing nuts. Insert the suction hose. danger risk of injury. Pull the intelligent key to take all functions out of operation immediately. Insert batteries...
- 5 parameters for the different cleaning pro- grammes are preset in the appliance. Depending on the authorisation of the yel- low intelligent key, individual parameters can be changed. If you wish to permanently change the pa- rameters, you must use a grey intelligent key. This adjustment procedure...
- 6 press info button - the set value blinks. Set the desired language by turning the info button. Confirm the changed setting by press- ing the info button or wait till the set val- ue is automatically accepted after 10 seconds. Adjust the trailing time of the brushes. Same adjustment as "set langu...
- 7 remove the plastic parts. Remove the vacuum lips. Insert new or reversed vacuum lips. Insert the plastic parts. Screw in and tighten the star grips. Remove the rubber strip and clean the channel with a cloth. After cleaning, re- place the rubber strip evenly. Lift the cleaning head. 1 unlocking ...
- 8 * appliance requires 2 batteries 1) complete set (24 v/105 ah) incl. Connect- ing cable, order no. 4.035-449.0 2) complete set (24 v/70 ah) incl. Connect- ing cable, order no. 4.035-447.0 3) complete set (24 v/80 ah) incl. Connect- ing cable, order no. 4.035-450.0 push the appliance forward abou...
- 9 danger risk of injury! Before working on the appli- ance, remove the intelligent key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. If the display shows different error messag- es or if the error cannot be remediated: remove the intelligent...
- 10 accessory b 40 br appliance b 40 (brush roller accessories) description part no.: working width 450 mm part no.: working width 550 mm description packaging unit appliance requires brush roller, red (medium, stand- ard) 4.762-392.0 4.762-393.0 also for regular cleaning of heavily dirtied floors....
- 11 we hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the eu directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is m...
Http://www.Kaercher.Com/dealersearch.
