Karel ip112 User Manual - page 16

IP TELEPHONE SET 

6

When you have finished the Network and Account Setting configuration, the Register 

Status Icons will show in the idle screen:   

                Registering 

        Registered successfully 

                Register failed 

When all accounts register fail, phone will display "No Service" by default. 

When the phone reboot, it will register automatically. If many phones register at the same 

time, this will affect the server, the users can set the register power up time so that the 

phone will random register automatically within the set time.   

Setting the power up time via web interface: 

Choose Network->Advanced-> Registration random, enter the time in the field. 

Note:  

Should the IP PBX (SIP registrar) require an authentication, you will be prompted to enter 

the correct password. Make sure you are using the appropriate input method or enter the 

password via the web user interface.

Configuring via keypad 

Network Settings: Press Menu->Settings->Advanced Settings, enter the password, and 

choose Network ->WAN Port /PC Port /VLAN/Webserver Type/802.1x Settings Option to 

enter the internet relating configuration page.   

Account Settings: Press Menu->Settings->Advanced Settings, enter the password, and 

choose Accounts->Enter to configure the account settings.   

You can refer to the above “Configuring via Web Page” for the parameter details.