Karel ip112 User Manual - page 95

IP TELEPHONE SET 

84

Prefix   

When you set up the function of prefix, press this key, the phone will be ready to make a 

new call, and show up the content which your set previously on the dail interface. And 

you could enter other figure and call out 

To assign the key as Prefix: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, and choose Prefix from the 

list, and enter the number you want to show up on the dial interface in the Value field. 

2)  Press Confirm button to save the changes 

Zero-sp-touch   

You can also press the DSSKey which set as the Zero-sp-touch. Then press the DSSKey, 

the phone will turn to the Zero-sp-touch interface. 

To assign the key as Zero-sp-touch: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, and choose Zero-sp-touch 

from the list. 

2)  Press Confirm button to save the changes 

ACD   

ACD(Automatic Call Distribution) is automatic call distribution equipment, is according 

specific Transfer Rules and distribution strategy to switch the access call to the right 

person. 

Presses DSSKey, it will pop up a login box, enter the User ID and Password, click the Log 

In hot key. 

Presses DSSKEY again enter to the ACD Status page, choose Available/Unavail to 

change the status. 

You can also press LogOut hot key to logout. 

When you status is Available, the calls will be directed to your phone. Or the status is 

unavailable, the calls will not be directed to your phone。 

To assign the key as ACD: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, and choose ACD from the 

list. 

2)  In the "Line" field, select a line for which to apply this key. 

3)  Press Confirm button to save the changes