Karel ip112 User Manual - page 76

IP TELEPHONE SET 

65

3)  Choose WAN Port, press Enter hot key. 

4)  Set the VLAN Status, and input the VID Number, Priority. 

5)  Press Save hot key to save the settings, or Back hot key to return to VLAN menu. 

6)  Follow the same way to set the PC Port option. 

To configure VLAN settings via Web interface: 

Choose Network->Advanced to do the relating configuration. You can consult your 

system administrator for more information.

LLDP 

The Link Layer Discovery Protocol (LLDP)is a vendor-neutral Layer 2 protocol that allows 

a network device to advertise its identity and capabilities on the local network.   

Enable LLDP function; the phone will go to switch to get related VLAN parameters 

automatically. (Synchronous with VALAN in switch) 

To configure LLDP settings via Web interface: 

1) Choose 

Network->Advanced->LLDP->Active option, in the pull-down menu, choose 

enable. 

2)  Then enter the corresponding Packet Interval in Packet Interval field.   

3)  You can also disable this function when you choose disable in active field. 

4)  Click the Confirm button to save the change.