Karel ip112 User Manual - page 86

IP TELEPHONE SET 

75

To assign the key as Forward: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, choose Forward from the 

list. 

2)  Enter the extension number you want to forward to in the Extension field. 

3)  Press Confirm button to save the changes. 

Transfer 

You are able to configure the key as a transfer key to perform the 

Blind/Attended/Semi-Attended Transfer.     

To assign the key as Transfer: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, and choose Transfer from 

the list. 

2)  Enter the Number in the "Value" field, when you are on a conversation, press this key, 

the phone will Blind transfer to the number. Or you can leave it black to set as the 

transfer button. 

3)  Press Confirm button to save the changes. 

Hold 

The key can be configured as a hold key. You can use this key to hold and retrieve a call 

during the conversation. 

To assign the key as Hold: 

6)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, choose Hold from the list. 

7)  Press Confirm button to save the changes. 

DND 

If the key is configured as DND key, you are allowed to active the DND function 

immediately when you press it. Press it again to deactivate DND mode.   

To assign the key as DND: 

1)  Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the 

assignment, there is a pull-down menu in the Type field, choose DND from the list. 

2)  Press Confirm button to save the changes. 

Redial 

If the key is configured as Redial key, press this key under the idle status, it will enter the 

Dialed Calls interface, then you can choose a special line to call out by pressing the line 

keys.