Karel ip112 User Manual - page 80

IP TELEPHONE SET 

69

Reset to Factory 

You should reset the phone only in this case: the phone configuration was changed and 

the phone is not functioning anymore. To maintain the configuration of the phone, you 

need your system administrator or service provider’s advice.   

To reset to factory via phone interface:   

1)  Press the Menu->Settings->Advanced Settings   

2)  You are prompted to enter the required password, the default one is admin.  

3)  Scroll to Reset to factory option, and press Enter hot key to enter the configuration 

interface. 

4)  You are prompted to confirm the change, press OK hot key to reset to factory settings, 

or press Cancel hot key to return to previous menu.   

5)  It will take a few minutes to reset, please do not power off during resetting, or it will 

cause flash memory error.   

Note:  

The reset to factory option must in the admin mode. 

To reset to factory via Web interface: 

1) Choose 

Upgrade->Basic. 

2) Click 

Reset 

button. 

3)  You are prompted to confirm the change, press OK to confirm the changes, press 

Cancel to cancel the operation. 

Note:  

If you confirm all current setting changes including contact list, call history, account 

settings, etc will be lost, you need to export the configuration first if you still want to import 

the old configurations after reset. Or your phone must be configured a new manually 

unless mass provisioning is used!   

To Export/Import the old configuration file via Web interface: 

1)  Choose Upgrade->Advanced, select Import/Export Configuration, choose Export 

button to export the file to your local computer. 

2)  Choose Upgrade->Advanced, select Import/Export Configuration, choose Browse 

button, select the specific configuration file in your local computer, choose Import 

button. 

3)  It will take a few minutes to reset, please do not power off during resetting, or it will 

cause flash memory error.