Kawasaki Z800 ABS Owner's Manual - page 124
Other manuals for Z800 ABS:
Owner's Manual, Service Manual
of
169
Black plate (123,1)
•
Wipe off any lubricant that gets on
the tire surface.
Drive Chain Slack Inspection
•
Set the motorcycle up on its side
stand.
•
Clean the chain if it is dirty, and lubri-
cate it if it appears dry.
•
Rotate the rear wheel to find the po-
sition where the chain is tightest, and
measure the maximum chain slack
by pulling up and pushing down the
chain midway between the engine
sprocket and rear wheel sprocket.
A. Chain Slack
•
If the drive chain is too tight or too
loose, adjust it so that the chain
slack is within the standard value.
Drive Chain Slack
Standard: 20 ~ 30 mm (0.8 ~ 1.2 in.)
MAINTENANCE AND ADJUSTMENT
123