Kawasaki Z800 ABS Owner's Manual - page 125
Other manuals for Z800 ABS:
Owner's Manual, Service Manual
of
169
Black plate (124,1)
Drive Chain Slack Adjustment
•
Loosen the left and right chain ad-
juster locknuts.
•
Remove the cap.
•
Remove the cotter pin, and loosen
the axle nut.
A. Axle Nut
B. Cotter Pin
C. Locknut
D. Adjuster Nut
•
If the chain is too loose, turn in the
left and right chain adjusters evenly.
•
If the chain is too tight, turn out the
left and right chain adjusters evenly.
•
Turn out both chain adjusters evenly
until the drive chain has the correct
amount of slack. To keep the chain
and wheel properly aligned, the
notch on the left wheel alignment in-
dicator should align with the same
swingarm mark that the right indica-
tor notch aligns with.
124
MAINTENANCE AND ADJUSTMENT