Kawasaki Z800 ABS Owner's Manual - page 55
Black plate (54,1)
Blue High Beam Indicator Light
: When the headlight is on high
beam, the high beam indicator light
goes on.
Green Turn Signal Indicator
Light
: When the turn signal switch is
pushed to the left or right, the turn sig-
nal indicator light blinks.
Yellow ABS Indicator Light (For
models equipped with ABS)
: The ABS (Anti-lock Brake Sys-
tem) indicator light comes on when the
ignition switch is turned on and goes
off shortly after the motorcycle starts
moving. If the ABS is normal, it stays
off. If something is wrong with the ABS,
the indicator comes on and remains lit.
When the indicator light is on, the ABS
does not function but if the ABS fails,
the conventional brake system will still
work normally.
For more detailed information about
ABS, see the Anti-lock Brake System
(ABS) section in the HOW TO RIDE
THE MOTORCYCLE chapter.
Warning Indicator Lights
Yellow Engine Warning Indicator
Light
: The engine warning indicator
light goes on when the ignition key is
turned on and goes off soon after en-
suring that its circuit functions properly.
The warning indicator light also goes
on or blinking whenever the troubles
occur in digital fuel injection system
(DFI).
The blinking of this warning indicator
light indicates the condition that the en-
gine cannot be started.
See the Stopping the Engine section
in the HOW TO RIDE THE MOTOR-
CYCLE chapter for more information. If
the warning indicator light goes on,
54
GENERAL INFORMATION