Keiser M3+ User And Service Manual - page 10
Assembling Bike to Base Frame
Step 1:Carefullylowerthebikeontothebaseframeoverthebasescrews,withthefrontofthebikefacingthetransport
wheelsontheBaseFrame.
Step 2: Insertonewasheroneachofthefourbaseframestuds.
Step 3:Installtheacornnutsonthestudsandhandtighten.Torquetheacornnutswitha16mmor5/8”crowfootand
torquewrenchto45Nm(35ft-lbs)usinga16mm,or5/8inchopen-endwrenchtoholdinposition.
1
3
Assembling Pedal to Crank Arm
Step 1:UnwrapthepedalsetandLoctite242,obtainthe
Torquewrench,15mmcrowfoot,4”extension,and15mm
open-endwrench.
Step 2:Withacleancloth,wipethethreadedareaofthe
pedals.ApplyLoctite242tothepedalthreads.Install
thepedalsintothecrankarms,usethe15mmopen-end
wrenchtotighten.Finishwiththetorquewrench,15mm
crowfoot,and4”extension.Torquepedalsto45Nm(35
ft-lbs).
NOTE:LeftpedalisLHthreadsandrightpedalisRH
threads.
WARNING!FailingtoinstallthepedalswithLoctite242,or
crossingthethreadswilldamagethem,andcouldresultin
seriousinjurytotheuser.
8