Kemper Profiling Amplifier Manual - page 26

KEMPER PROFILING AMPLIFIER

26

Building a rig

If you have ever used a digital guitar processor before, you will know that building your own rigs is part of 

the fun! In the KPA you will find it surprisingly easy, as well. Simply bring any module or section into focus, 

activate it, and select from a range of presets using the BROWSE knob. Tweak to your liking, add spices if 

necessary. To help get you started, here is a brief overview of the available modules:

Stomp section

This is a mono section. It includes all the built-in stomp box simulations that you can place before (pre-) 

your virtual amplifier stack. An idle stomp slot can be activated by pressing and holding the corresponding 

Stomp A/B/C/D button. Once in focus, the soft button “Enable” recalls the default Wah algorithm. Alterna-

tively, use the Type knob to browse through all available stomp algorithms. Selecting an option will recall 

the stomp and close the list browser.

♦

Stomp Types

There are several types of stomp boxes available in the stomp section, such as various Wah effects rang-

ing from bandpass to comb filters. There are also several distortion stomps available, which were modeled 

after famous vintage pedals. On top of all this, modulation stomps such as Vintage Chorus, Hyper Chorus, 

Vibrato, Air Chorus, Flanger, Phaser, Tremolo and Rotary Speaker are included.

Most stomp parameters are self-explanatory, and a detailed overview of all available stomp parameters can 

be found in the Reference Manual.