Kemper Profiling Amplifier Manual - page 33

CONFIGURE YOUR SYSTEM PREFERENCES

33

Configure your system preferences

System button

Press SYSTEM to access the “global settings” pages. Global settings remain unaffected when you change 

to another rig. Parameters in the system menu include “Pedal Settings”, “LED Intensities”, “Display Con-

trast”, “Time And Date”, among others.

Module button behavior

You have learned that the module buttons have two purposes:

•

Switch a module on or off (press button briefly).

•

Bringing a module into focus (hold the button for a little while).

If you feel uncomfortable with holding the module buttons to put an effect into the focus, you can change 

the behavior of the buttons in the system menu by activating “Direct Edit”. In this mode a short push of a 

module button puts the module into focus, just as the RIG or SYSTEM buttons do.

There are still two ways to switch a module on and off: either bring the effect into focus and use the ON 

button, or hold the ON button while pressing the module buttons that you want to switch. This procedure 

will work in any situation. Even while editing one effect, you can switch other effects on and off by holding 

the ON button while you press the respective module buttons.