La Marzocco GS/3 Programming Manual - Service Cycles
EN
39
Display
Operating Procedure
Description
Enter into “Machine Off” programming mode.
Scroll through the displayed parameters using the button
until the following display appears:
Press the button
or the button
to change the value (range =99000).
When finished, press the button
to continue to the next parameter.
N.B. : To reset this parameter once “Service Phone” number is displayed. Turn off machine with on/off switch behind
machine.
Press and hold
and
buttons. Turn on machine holding the two buttons until “Service Reset” appears on
display.
Service Cycles
0
1
2
3
4
OFF 09:30
Language
English
Service Cycles
0
“Machine OFF” Programming
• This parameter allows the user to
program a threshold number of cycles
when the machine prompts for service.
• When Prompted for Service, the
“Service Phone” number will be
displayed.