La Marzocco GS/3 Programming Manual - Pid Setting

EN

42

Display

Operating Procedure

Description

PID Setting

20.1 

°

F

“Machine OFF” Programming

•  This  parameter  sets  a  range  in  which 

the PID algorithm is active.

•  This parameter is preset at the factory 

based  upon  theoretical  calculations 

and physical experiments.

•  It is not recommended that this number 

is changed.

•  Changes  to  this  parameter  can  cause 

unexpected results.

•  It  is  important  to  write  down  the 

number before any changes are made 

to  make  sure  you  can  return  to  the 

factory  programming  if  unexpected 

results occur.

•  Experienced  technicians  may  wish  to 

experiment with different values.

•  The lowest value for this parameter is 

3.6°F / 2.0°C

PID Setting

1

2

3

4

Enter into “Machine Off” programming mode.

Scroll through the displayed parameters using the button 

 until the following display appears:

Press the button 

 or the button 

 to change the value of the parameter.

When finished, press the button 

 to continue to the next parameter.

OFF    09:30

Language

English

PID Setting

20.1 

o

F