La Marzocco GS/3 Programming Manual - Coffee Boiler Temperature
EN
43
Display
Operating Procedure
Description
Coffee T. Offset
1.5
°
F
• This parameter isused to calibrate
the coffee boiler temperature system
to ensure the display temperature
accurately represents the temperature
of the water exiting the group head.
• This parameter is preset at the factory
based upon initial tests of this espresso
machine.
• It is not recommended that this number
is changed.
• Changes to this parameter can cause
unexpected results.
• It is important to write down this value
before making changes to be sure you
can return to the factory programming
if unexpected results occur. Each
machine may have a different value as
it is set individually.
“Machine OFF” Programming
Coffee Boiler Temperature
Offset
Enter into “Machine Off” programming mode.
Scroll through the displayed parameters using the button
until the following display appears:
Press the button
or the button
to change the value of the flasing parameter.
When finished, press the button
to continue to the next parameter.
1
OFF 09:30
Language
English
Coffee T. Offset
1.5
o
F
2
3
4