La Marzocco GS/3 Programming Manual - Water Filter Alarm

EN

44

Display

Operating Procedure

Description

Water filter

0

•  This  parameter  allows  the  technician 

to  preprogram  an  alarm  that  notifies 

the user when the water filter requires 

service or replacement.

•  When  the  programmed  volume  of 

water has passed through the espresso 

machine  the  error  message  “Change 

Filter” is displayed.

•  A  value  of  0  (zero)  disables  the  filter 

alarm parameter.

“Machine OFF” Programming

Water Filter Alarm

Enter into “Machine Off” programming mode.

Scroll through the displayed parameters using the button 

 until the following display appears:

Press the button 

 or the button 

 to change the value of the flasing parameter.

When finished, press the button 

 to continue to the next parameter.

When the espresso machine has dispensed the value of this parameter the message “Filter Alarm” will appear.

NOTE: To reset this message turn off the espresso machine using the main power switch. 

Then, press and hold the button 

 and the button 

 and turn on the machine using the main power switch. 

Hold  both  buttons  until  the  following  message  appears.  Release  both  buttons  and  continue  to  use  the  espresso 

machine as normal.

1

OFF    09:30

Language

English

Water filter

0

Filter

Alarm

Filter 

Reset

2

3

4

5