La Marzocco Linea PB Manual - page 107

EN

107

Display

Operating Procedure

Description

Programming Mode

“Technical” Programming

Update Firmware

Update Firmware

• This parameter allows the technician to 

update the control unit of the espresso 

machine via a USB Pendrive.

After accessing the “Technical” programming menu and entering the password, use the buttons T1 

 and 

T2 

 until the following screen is displayed.

Press the T3 button  

 to update the firmware. The following screen will immediately appear.

Insert the USB Pendrive into the USB port and press the T3 button 

.

When the update is over, the espresso machine restarts. Set the switch to 0 (zero) and then again to 1.

Update Firmware

Enter Password

******

Insert USB Key

And Press Enter

OFF  

00:00

2

4

1

3