La Marzocco Linea PB Manual - page 31
EN
31
Display
Operating Procedure
Description
Programming Mode
(only on ABR espresso machine models)
Brewratio Programming
• To brew in brew ratio mode, set this
mode by entering the software settings.
• Brew ratio: this mode is the ratio between
the coffee powder and the weight of the
drink
Brewratio
PF 0s 0s
0.0 0.0 0.0
The procedure for weighing the filter
holder either empty or filled with coffee
powder is shown below.
• This parameter records the values for
the brew according to the brew ratio
technology.
• These values can be changed even
manually by entering the software
settings.
LaMarzocco 00:00
CB 93,8
°C SB
1
When the espresso machine is on, press and hold the button T2
. After about 5 seconds the following
screen is displayed.
When the value is no longer flashing, place the empty filter holder on the appropriate seat of the grid as
described in chapter 9. The value is automatically recorded. (*)
Press and hold the button T1
. After about 5 seconds the following screen is displayed.
When the value is no longer flashing, place the filter holder filled with coffee powder on the appropriate seat of
the grid as described in chapter 9. The value is automatically recorded.
This procedure can be repeated for all the brewing groups.
(*) This procedure must be performed at the first installation, though it is possible to repeat it anytime (for
example if you get a new portafilter set).
PF 0s 0s
0.0 0.0 0.0
2
LaMarzocco 00:00
CB 93,8
°C SB
3
COF 0s 0s
0.0 0.0 0.0
4