La Spaziale S1 Vivaldi II Owner's Manual - page 11
S1 Vivaldi II Owner’s Manual
Page 10
3. Place one or Double Cups under the portafilter handle (11).
4. Press the button corresponding to Single Cup (24) if you want to make one coffee or
Double Cups (25) to start the delivery. Once the desired quantity of coffee programmed
is reached, the delivery automatically stops.
4.6 Volumetric Dose Programming
The programmable volumetric dosing feature allows programming of the
Single Cup
(24) and
Double Cup
(25) buttons to dispense whatever quantities of espresso the user desires.
Their use for single cup and double cup quantities is merely a suggestion. Many users only
pull double shots and program the double shot button for 1.5-2.0oz for that purpose. Then
they program the
Single Cup
button for a larger amount for use in flushing the portafilter
basket and/or the group between shots. The beauty of the programmable dosing feature is
that the machine owner can be creative. The following are the instructions for programming
each button assuming they are being used for single and double shots.
1. With the machine on, press the
ON//OFF
(27) button and keep it pressed for about 3
seconds; the control light (22) and the one indicating the set temperature start flashing.
2. Insert the single cup basket into the portafilter handle (11) and fill it with 7-8g of ground
coffee making sure not to leave coffee powder on the upper edge of the portafilter
handle, and press it with the included plastic tamper or, more optimally, a high quality
53mm coffee tamper.
3. Fasten the portafilter handle (11) to the brewing group (10), placing a cup under the
portafilter handle.
4. By pressing the
Single Cup
button (24) the delivery starts and the lights 14-15-16 turn on
to show that the one shot espresso dose is being programmed.
5. When the coffee inside the cup has reached the desired quantity, again press the button
(24) to stop the delivery.
6. You automatically return to the initial visualization.
7. Repeat the previous steps above using the
Double Cup
button (25) making sure you
change the filter inside the portafilter handle (11) to the double shot basket and fill it with
14-16g of espresso first.
4.7 Hot Water Delivery
(only possible with the boiler turned on, BOILER light 13 on)
1. Place the pitcher below the hot water output (28):
2. Press the
Hot Water
delivery push-button (23).
3. The hot water delivery starts.
4. Once the desired quantity is reached, stop the delivery by pressing the
Hot Water
button
(23) again
4.8 Steam Delivery
(only possible with the boiler turned on, light 13 turned on)
1. Insert the steam wand (2) in the pitcher containing the drink to be heated.
2. Turn the steam knob (6) counter-clockwise, regulating the steam flow according to the
need.