La Spaziale S1 Vivaldi II Owner's Manual - page 13
S1 Vivaldi II Owner’s Manual
Page 12
Turning Economy Mode On and Off
1. The VII must be in ON mode, not Standby for all operations below.
2. Press the
BOILER
button for 10 seconds until the ECON lamp illuminates. Economy
mode is now active.
Note: if you turn the VII Off and On again or if power is removed and restored to the
VII, Economy mode remains active until you perform step 6, below.
5. While in Economy mode you can momentarily press the
BOILER
button to completely
turn off the boiler. Another momentary press returns you to Economy mode.
6. To exit Economy mode, press and hold the
BOILER
button for 10 seconds until the
ECON lamp is extinguished.
4.10 V1/VII Mode Switch
The VII Controller board actually has a backward compatible mode that emulates the
functionality of the original VI. None of the advanced features of the VII are available when
the controller is in VI mode. If you don’t seem to be able to access the VII features, your
machine might have inadvertently gotten switched to VI mode. If in doubt as to which mode
you are in, just unplug the VII and then plug back in to see if the three yellow or three green
lamps blink once. Yellow = VII mode and Green = VI mode.
With the VII in Standby mode (ON/STBY blinking green), press and hold the
Hot Water
button for at least 10 seconds. If three yellow lights blink once your machine is now in VII
mode. If three green lights blink once the machine is now in VI mode. Each time you hold in
the
Hot Water
button for 10 seconds while in Standby (ON/STBY blinking green), the mode
toggles.
Note that if you change from VII mode and then back again all the V2 specific settings are
lost and must be reset.
4.11 Espresso Group Water Temperature Regulation
4.11.1 Standard Temperature Adjustment
1. When the machine is On (ON/STBY solid green), press the button
ON//OFF
(27) and
keep it pressed for 3 seconds, the control light (22) and the one concerning the set
temperature start flashing. For example, if the set temperature is 95°C, light (18)
starts flashing.
2. In order to change the operating temperature, press and release the
Hot Water
button
(23); every press of the button corresponds an increase of the temperature of 1°C
(with the flashing of the corresponding light). When the maximum temperature of 97°C
(20) is reached, the selection restarts from the minimum temperature of 91°C (14)
(cyclic mode).
3. Once you choose the desired temperature, in order to lock in this value, press the
ON//OFF
(27) button, the machine will then go back to its normal functioning.
The value of the operating temperature of the machine is easily changed in order to improve
the final result in the cup depending on the coffee blend used and the user’s personal
preference.