Lab.gruppen PLM Series PLM 10000Q Quick Start Manual - page 17
PLM Series Quick Start and Field Reference Guide
17
CONTrOls AND CONNECTIONs 7
high-intensity LEd
a white, high-intensity LED is located to the right
of the display. this LED illuminates when the PLM
Series’ control system is being accessed remotely via
the DLC PLM Edition software. Steady illumination
of the white LED indicates that the unit is selected
in the Controller. if the LED is flashing this means
that a parameter of the unit or the unit’s state has
been or is being changed.
Encoder
the rotary encoder is used to modify various PLM
parameters (e.g. input level) in conjunction with the
various display pages. When a menu item is selected
that permits adjustment of parameter values, the ring
around the knob illuminates.
Exit
the EXit key is used primarily while navigating the
menu system in MEnu mode; pressing it takes the
display back to a previous screen (“up one level” in
the menu tree). in MEtER mode, pressing the EXit
key always returns the display to the HoME view.
automatically cancel after two minutes if no further
mute actions are taken.
Meter
the MEtER button scrolls through three alternative
views: HoME, MoDuLE, and tEMPERatuRE.
Pressing MEtER when in MEnu mode returns the
screen to MEtER mode, and the HoME view is
displayed.
the display has two basic operating modes:
MEtER (default) and MEnu.
Menu
Pressing the MEnu button puts the screen display
into MEnu mode, and the “top” page of the MEnu
“tree” is displayed. once in MEnu mode, most of the
PLM Series’ operating functions can be accessed.
a full description of all the menu options is to be
found in sections 9.12.2 to 9.12.8 of the PLM Series
operation Manual.
Soft function buttons
Eight soft function buttons are set adjacent to the
display in two groups of four. these buttons are
unlabelled because their functions change accor-
ding to the current menu mode as displayed on the
screen.
Status LEds
Eight tricolor LEDs are integrated into the soft buttons
for convenience. these convey both fault and warning
indications, plus the currently selected mute status
of the Dolby Lake Processing system inputs and the
power output channels. Full details can be found in
section 9.10 of the PLM Series operation Manual.