Lab.gruppen PLM Series PLM 10000Q Specifications
Lab.gruppen Technology
2700 W per channel @ 2.7 ohms**
•
2350 W per channel @ 4 ohms**
•
2U chassis weighing only 13 kg (29 lbs)
•
Class TD
•
®
output stage
Regulated Switch Mode Power Supply (R.SMPS
•
™
)
Copper-finned Intercooler
•
®
with transverse-mounted output
devices
Full suite of protection and fault monitoring features
•
Comprehensive loudspeaker preset database
•
LoadLibrary
•
™
load “fingerprint” (identity and characteristics) data
Comprehensive LoadSmart
•
™
load verification and SpeakerSafe
™
continuous loudspeaker performance monitoring
Dante
•
™
low-latency digital network included as standard
Fully compatible with Dolby Lake Processor, Lake Contour
•
™
,
and Lake Mesa Quad EQ
™
and Mesa Parametic EQ
™
devices
Primary and secondary network connections (for daisy chaining or
•
system redundancy)
Digitally controlled ”amplifier gain” adjustable in 0.1 dB steps from
•
22 to 44 dB
Digital output attenuation in 0.25 dB steps from -inf to 0 dB
•
Binding post or Neutrik
•
®
Speakon
®
(1 x NLT8, 2 x NLT4) power
output connectors
Digitally implemented, zero-overshoot Inter-Sample Voltage Peak
•
Limiting (ISVPL
™
) adjustable in 0.1 V steps from 18 to 150 V
Power Average Limiter (PAL)
•
High-brightness front-panel LCD display
•
Moisture resistant silicone touchpad for front-panel display mode
•
selection and menu navigation
** More power available when driven asymmetrically.
Dolby Lake Processor Technology
Raised Cosine Equalization
•
Linear phase and classical crossovers
•
LimiterMax
•
™
– peak and RMS limiters
Iso-Float
•
™
ground isolation
Super Module capability
•
Parallel operation of the SmaartLive
•
™
frequency measurement and
analysis system
Analog and AES digital inputs with loop-thru outputs
•
Auto-selct input router for all inputs with user definable priorities
•
PLM 10000Q Powered Loudspeaker Management system
The PLM 10000Q seamlessly integrates networked digital signal
distribution, drive processing, power amplification, and load verifi-
cation plus performance monitoring in a single hardware unit and
unified software controller. This new approach, designated Powered
Loudspeaker Management (PLM), is a joint development of Dolby
®
Lake
®
and Lab.gruppen. As a cohesive system, the PLM 10000Q
affords significant advantages when compared to conventional
approaches utilizing separate components.
PLM 10000Q
Technical Data
PLM
™
Series: Powered Loudspeaker Management
™