Lab.gruppen PLM Series PLM 10000Q Specifications - Specifications Plm 10000Q
Item no. TDS-PLM10000Q_V8
L a b . g r u p p e n a b • S w e d e n
i n t e r n a t i o n a L c o n t a c t • i n f o @ L a b g r u p p e n . c o m | u S c o n t a c t • i n f o @ t c u S . c o m
w w w . l a b g r u p p e n . c o m
General
Number of input channels
2
Number of output channels
4
Peak total output all channels driven
10800 W
Max. Peak output voltage per channel
153 V
Max. output current per channel
35.5 Arms
Max. Output Power
2 ohms
2.7 ohms
4 ohms
8 ohms
16 ohms
All channels driven
2350 W
2700 W
2300 W
1300 W
660 W
Channels A and B, while channels C and D are driven at -3 dB
2)
2350 W
2900 W
2400 W
1300 W
660 W
Audio Performance
THD + N 20 Hz - 20 kHz for 1 W
<0.05%
THD + N at 1 kHz and 1 dB below clipping
<0.04%
Dynamic range with digital inputs (for all supported sample rates)
>116 dBA
Dynamic range with analog inputs
>114 dB
Frequency response (1 W into 8 ohms, 20 Hz - 20 kHz)
+ /-0.05 dB
Input Common Mode Rejection (CMR) 20 Hz to 1 khz
> 78 dB
Internal sample rate
96 k
Internal data path
32 bit floating point
Product propagation delay, best case (96 kHz AES)
1.90 ms
Product propagation delay, analog input
1.85 ms
Sample Rate Converters
THD + Noise
0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
THD + Noise
0.00022 %, typical at 1 kHz unweighted at +21 dBu headroom setting
0.00033 %, typical at 20 Hz and 20 kHz unweighted at +21 dBu headroom setting
AES / EBU inputs
Supported resolutions
≤ 24 bit
Supported sample rates
44.1, 48, 88.2, 96, 176.4, 192 kHz
Dante Audio Network
Supports redundant paths
Yes
Flexible topology
Yes
Network latency
<500 µs
Device presets
Local memory locations for the settings of the product
100
Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL)
17.8 - 153 V, step size 0.1 V
Current Limiter
35.5 Arms
LimiterMax (rms and peak limiters)
– MaxRMS (rms voltage limiter)
Yes
– MaxPeak (peak voltage limiter)
Yes
Current Average Limiter (CAL) (max average during 500 ms)
25 Arms
Gain
Amplifier gain
22 - 44 dB, step size 0.1 dB
Analog attenuator
-Inf to 0 dB, step size 0.25 dB
Back panel interface
AES / EBU / I/O (input + link)
2 x 3-pin XLR
Analog, 2-channel I/O (input + link)
4 x 3-pin XLR, electronically balanced
Output connectors
Neutrik Speakon (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs) (must be specified upon order)
Auto 10/100, Auto Uplink
2 x RJ45 EtherCon
Control and monitoring interface
Via Ethernet for Dolby Lake Controller software
Detachable mains cord
Neutrik PowerCon 32 A
Cooling
Two fans, front-to-rear airflow, temperature controlled speed
Front-panel user interface:
Display, daylight readable LCD
2.5 inch
Fault/Warning/Limit/Clip indicators
RGB LEDs
Mute and soft function buttons
8 provided
Standby Power button
On/Off
Mute Enable button
Enables muting of outputs and inputs via soft-button keypad
Meter button
Toggles through meter views
Menu button
Provides a menu driven interface for full function front panel control
Rotary Encoder
Yes
Exit button
Provides a “back” function
Power
Operating voltage, 230 V / 115 V nominal
1)
140-265 V / 70-135 V (45 - 66 Hz)
Soft start / Inrush Current Draw
Yes / max. 5 A
Mains Power Average Limiter (PAL)
Yes
Dimensions (W/H/D)
W: 483 mm (19”), H: 88 mm (2 U), Overall D: 470 mm (18.5”) deep including handles and rear support.
Weight
13 kg (29 lbs.)
Finish
Black painted steel chassis with black painted steel / aluminum front
Approvals
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
Note 1): Separate 230 V or 115 V versions available. Not selectable on the product.
Note 2): Assymetrically loading the output channels (as shown, for example): If some channels have reduced output power requirements, the voltage drop from the power supply will be reduced,
resulting in a higher voltage and power output for the other channels.
All specifications are subject to change without notice.
Intercooler and Class TD are national and/or international registered trademarks of Lab.gruppen AB. PLM, Powered Loudspeaker Management, R.SMPS, LoadLibrary, LoadSmart,
SpeakerSafe and ISVPL are trademarks of Lab.gruppen AB. Dolby, Lake, and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby Lake Processor, Lake
Contour, Lake Mesa Quad EQ, LimiterMax and Iso-Float are trademarks of Dolby Laboratories. All other trademarks remain the property of their respective owners.
Copyright © 2008 Lab.gruppen AB. All rights reserved.