Labgear S401 User Manual - page 10
S401
- Auto Scan / TP Manager
10
8.7.2 AUTO SCAN
In the
Satellite Installation
menu select Auto Scan and press
OK.
•
Satellite
: Press the
u
key to enter the satellite list. Use the
pq
keys to select a satellite then press
OK
.
•
Transponder
: Press the
u
key to enter the TP list. Use the
pq
keys to select a transponder then press
OK.
•
NIT
: Press the
u
key to switch the network searcher On/Off.
•
Program
: Press the
u
key to select
ALL/Free Only
TV search type.
•
Scan Mode
: To select Scan mode, press the
u
key to select
Default TP/One TP/Blind.
•
Scan Select
: Press the
u
key to select scan all of the selected
satellites or just the current selected satellite.
8.7.3 TP MANAGER
In the
Satellite Installation
menu select Transponder and
press
OK.
Use the
pq
keys to select the current satellite
• Edit Satellite
Press the
Red
key to edit the satellite.
NO.
: Satellite number.
W-E
: Switches the satellite longitude to West or East.
Longitude
: Use number key input value.
Satellite Name
: Press
OK
to open the keyboard, use the
direction key to input satellite name.
•
Add Sat
Press the
Orange
key to add a satellite.
Press the
t
u
key to TP manager.
•
Edit TP
Press the
Red
key to edit TP.
NO.
: TP number.
Frequency
: Use the number keys to input values.
Symbol Rate
: Use the number keys to input value.
Polarity
: Press the
u
to change polarity.
•
Add TP
Press the
Orange
key to add a TP. Please refer to TP edit
operations.
8.8 Others
• TV Channel Editor
• Radio Channel Editor
• EPG
• System Info
!
!
!
!
!
!
!
!
!
!