Labgear S401 User Manual - page 6
S401
- Satellite Find Menu
6
8.2.1 Satellite
Press
u
to enter the
Satellite List
and scroll
q
to find the
satellite you want and press
OK
.
8.2.2 Local Frequency
Scroll down to
Local Frequency
press
u
to enter
the
LNB List
and scroll
q
to find the LNB type you
want and press
OK
.
8.2.3 Transponder
Scroll down to
Transponder
press
u
to enter
the
TP List
and scroll
q
to find the TP you
want and press
OK
.
8.2.4 Frequency
use the number keys to enter the frequency.
8.2.5 Symbol rate
use the number keys to enter the symbol rate.
8.1.6 Polarity
use the
t
u
keys to select vertical or horizontal polarization
8.2.7 Tone
use the
t
u
keys to turn the 22khz tone switch on or off.
8.2.8 Beep tone
use the
t
u
keys to turn the beep tone on or off. If switched
on you will hear the tone when you enter the search screen.
8.2.9 DiSEqC mode
Use the
t
u
keys to set the port type as DiseqC 1.0/1.1,
DiseqC 1.2/USALS or Unicable.
8.2.10 DiSEqC Type & Input
For diSEqC 1.0 or 1.1 scroll to DiSEqC 1.0/1.1 and use the
t
u
keys to set the port number or if Unicable is selected
use the
pq
to go to IF Channel, use the
t
u
keys to select
channel and the number keys to set Center Frequency.
!
!
!
!
!
!
!
!
!
!
!
!