Labgear S401 User Manual - page 7
Manual is about: Professional Satellite Meter
of
16
S401
- Quick and Loop Search
7
8.2.0.1 Quick Search
In the
Satellite Find
menu when
Satellite
is selected if you
press
OK
the screen to the right opens, press
OK
again to
start quick search.If you have set the Longitude and Latitude
in Angle Calculation, the angle of LNB, the orientation and
elevation of antenna will all be displayed on the screen.
• TP Scan: Press
OK
to search the current TP.
• Auto Scan: Press the
Red
key to auto blind search the
current satellite.
8.3 Loop Search
Select
Loop Search
, then press
OK
in Loop Search.
8 TPs will be shown.
Press
OK
to enter
TP Edit
, you can edit the Satellite
and Transponder.
!
!
!
!
!
!
!
!