Labgear S401 User Manual - page 9
!
!
!
!
!
!
8.7 Satellite Installation
• Satellite settings
• Auto scan
• TP manager
8.7.1 Satellite Setting
In the Satellite Setting main menu:
Press the
Red
key to enter the Transponder screen.
Press
Green
key to enter the Auto Scan screen.
Press
pq
keys to move the cursor to select a satellite press
OK
.
Press
u
to access the individual satellite properties.
Once in the individual satellite properties screen:
1.
TP Manage
press
Red
key to enter the
TP manager
screen.
2.
Auto Scan
: press the
Green
key to enter the Auto Scan.
3.
LNB
: Press
t
u
key then change the LNB frequency.
4.
Transponder
: Press
t
u
key to change the current TP.
5.
DiSEqc 1.0
: Press
t
u
key to change the DiSEqC port.
6.
DiSEqc 1.1
: Press
t
u
key to change the DiSEqC port.
7.
Motor
: Press
t
u
key to change the DiSEqC port.
If you are selecting DiSEqC1.2/USALS, press OK to
enter the motor interface.
•
Transponder
: Press
OK
to change the current TP.
•
Mode: A
, Position
A1 Direction
: Press
t
u
key to move direction to west or east.
A2 Position
: Save the dish position for the satellite.
•
Mode: B
, Drive to Zero
Move the cursor to
GO
, then press
OK
, the motor will move to zero.
•
Mode: C
, Drive to stored position
Move the cursor to
GO
, then press
OK
, the motor will go to the position saved in mode
A
Position.
•
Mode: D
, Drive to Satellite
Move the cursor to
GO
, then press
OK
, the motor will go to the auto calculate position.
•
Mode: E
, Recalculate
E1
Direction: Press
t
u
key to move direction to west or east.
E2 Recalculate
: Recalculate the satellite position.
•
Mode: F
, Set East Limit or Set west Limit to restrict the motor movement to the East or to the West.
F1 Direction
: Press
t
u
key to move direction to west or east.
F2 Store
: Save the satellite position of A2
•
Mode: G
, Set Limit enable or disable - Set the limit enable or disable.
8.
Unicable
: Press
t
u
key to select Unicable then press OK into the Unicable setting.
•
Transponder
: Press
t
u
key to change the current TP.
•
IF Channel
: Press
t
u
key to change SCR channel.
•
Center Frequency
: Use number key to input number.
S401
- Satellite Installation / Setting
9