Lampert PUK D3 Operating Manual - page 3
© Lampert Werktechnik GmbH
2017
2
TABLE OF CONTENTS
1
WARNING AND INFORMATION SIGNS
Pg. 2
2
FIELD OF APPLICATION
Pg. 3
3
SAFETY REQUIREMENTS
3.1
General safety requirements
Pg. 3
3.2
Personal body protection and hazards
3.3
Hazards of shielding gas cylinders
Pg. 4
3.4
Risk of allergic reactions
Pg. 4
4
SETUP AND INSTALLATION
4.1
Set-up of the device
Pg. 4
4.2
Description of the rear of the device
Pg. 5
4.3
Connection of eye protection and
LED illumination of the microscope SM5
Pg. 5
4.4
Connect shielding gas supply
Pg. 5
4.5
Inserting the electrodes into the handpiece Pg. 6
4.6
Connect power supply
Pg. 6
4.7
Configuration of the welding microscope
Pg. 6
5
COMMISSIONING
5.1
Description of the front-side controls
Pg. 7
5.2
Description of menu items
Pg. 8
5.3
Switching on the device
Pg. 9
5.4
Adjusting for the correct gas flow
Pg. 9
5.5
Control level “settings”
Pg. 9
6
SELECTION OF THE WELDING PARAMETERS
AND USER LEVELS
Pg. 10
6.1
Selection of the welding parameters Pg. 10
6.2
Expert menu
Pg. 12
6.3
Help Function
Pg. 12
6.4
Programming
Pg. 12
6.5
Loading saved programs
Pg. 13
6.6
Fixation welding
Pg. 13
6.7
Retention welding function Pg. 13
7
WELDING INSTRUCTIONS
7.1
Introduction to welding
Pg. 13
7.2
Welding with the smoothing mode Pg. 14
7.3 Retention welding Pg. 14
7.4
Welding with the foot switch Pg. 14
7.4.1
Fixation welding
Pg. 14
7.4.2
Retention welding with foot switch Pg. 15
7.5
Basics and tips
Pg. 15
7.6
Sharpening the electrodes Pg. 15
8
CARE OF THE SYSTEM COMPONENTS
8.1
Care of the welding equipment
Pg. 16
8.2
Care of the microscope
Pg. 16
9
TECHNICAL DATA
Pg. 17
9.1
Technical data welding device
Pg. 17
9.2
Technical data microscope
Pg. 17
9.3
Optical data microscope Pg. 17
9.4
Technical data LCD shutter Pg. 17
9.5
Type plate Pg. 18
9.6
Warning notices Pg. 19
10
TROUBLESHOOTING
Pg. 19
10.1
Welding device
Pg. 19
10.2
Microscope
Pg. 20
11
SPARE PARTS LIST
Pg. 21
12
DISPOSAL INFORMATION Pg. 21
13
EC-DECLARATION OF CONFORMITY Pg. 21
Warning!
“Warning” identifies a potentially dangerous situation. If this is not avoided, the consequences can be death or
severe injuries.
Caution!
"Caution!" identifies a potentially hazardous situation. If this is not avoided, the consequences can be slight or
minor injuries as well as property damage.
Note!
“Note” identifies the product at risk from the hazard and possible damage to the equipment.
Important!
"Important!" designates user tips and other especially useful information. This is not a signal word for hazardous or
dangerous situations.
1. WARNING AND INFORMATION SIGNS