Lantronix Com Port Redirector Quick Start Manual - page 10
9
2. Enter the following information:
Com Port
Settings
Description
Buffer
Writes
If selected, when an application opens a COM port and starts
writing to that port, CPR will buffer those writes and try to send
as many as possible in a single TCP packet (speeds
processing).
Server
Reconnect
If selected, enables the com port to reconnect to the device
server after the device server disconnects from CPR.
No Net
Close
If selected, when an application closes the com port, CPR does
not close the network connection. To disconnect CPR from the
device server, right-click the com port in the com port tree view
on the left or in the Com Port List on the right, or select
Disconnect on the Com Port menu.
Connection
Timeout (in
seconds)
Number of seconds the com port should wait before attempting
to connect to the next device server in the list, or before
aborting the connection attempt.
Timeout
Reconnect
If selected, CPR re-establishes the connection if the connection
times out. When auto-reconnecting, CPR tries to reconnect until
the connection succeeds or the number of tries reaches the
value in Reconnect Limit.